Reviews
Product # 31159
The part was purchased for the Honda Monkey. We continue to change our appearance. This time, the turn came to the steering wheel mounting bar. We definitely use parts only from proven and high-quality manufacturers. As a result, the item turned out to be of high quality and with excellent appearance, our expectations were confirmed. There were no problems with the installation. We definitely recommend it. View detail
Even at 20mm, Riding Position can be improved considerably.
A 20mm Up can be attached without extending the wireetc.
Position-wise, even 20mm can vary a lot. (This is my personal opinion.)
Top Bridge*The gap with the Other Brand Product (TAKEGAWAOil Temperature MeterDisplay) was a concern, so I chewed Nylon washer.
View detail
handle up~!!
My height is over 180cm, so the handle position of pure monkey is low. It wasn't too uncomfortable, but I was looking for it because I wanted it to be a little high, so I found a spacer from Zecraft's spacer. The black color is luxurious, and it fits perfectly with the clamp. I bought it after seeing other people's reviews, and it was a great choice. I don't have a picture after installing it, but I recommend it. Thank you. View detail
Due to a change in position
I changed my seat to a Kitaco one before the season, but when I started riding...
I don't mind the footing, but when I run, I find myself leaning forward more than before.
I'm mainly a touring rider, so I like to ride in a relaxed position.
So I bought it.
It's not a particularly difficult process, since all you have to do is remove the handle and insert the product.
I bought the two centimeters up, and I think it was just right.
View detail
Nice Items
Perfect for dress-up!
I want it to be re-released!
View detail
Perfect
I ordered it to change from an unnamed Chinese product to this product. It will be installed on the Monkey 125. It will be easy to mount. I checked that the Monkey cable can be installed up to 30mm up size and changed it from the existing 20mm up. View detail
The texture is good.
I have not installed it yet, but the texture is good.
Bolt comes with M8*50, but it is Steel, so I am curious.
View detail
Graft quality is as good as it gets.
I bought this product to increase the rigidity and dress-up of the front area.
The dress-up effect is preeminent because it has been processed with Stages around the keys and the detailed part has also been processed with great care.
The stiffness of the handlebar is well balanced with the rigid mount.
If you're actually in Cornering and it's NORMAL. "Funyuns." I felt that there was a certain effect because the part that had been
I was wondering if the vibration would be Rigid? I thought, but I do not feel it unexpectedly.
On the other hand, if you use NORMAL, the Handlebar will not tremble as much as it did in Neutral.
The replacement hurdle is to remove the NORMAL parts as well as other parts.
Especially, when you remove the key box of the diversion, it is quite difficult because ScrewHead is special and overtorque. (I pulled it out with Drill & rarr;Extractor)
In general, I think it is a good product with high machining accuracy and low price.
View detail
Feel a little bad
Before purchasing this triangle assembly kit, I looked for a large number of products of the same type, but unfortunately the products of other brands have been discontinued, and the products of other brands are not beautiful. In the end, I can only choose the products of the G craft brand. In terms of the first disadvantage, there is no color to choose from, the second is a bit monotonous, and the rest is only hoped for its durability. View detail
The letters GCraft give it a custom feel
I installed a 20mm Spacer to make the position easier to ride without destroying the style.
It's a perfect position, and it's easy to drive and doesn't hurt your hands.
View detail
Clean processing and strength
I couldn't lock the Handlebar because of the individual difference of the Frame, but Mr. GCraft did.
I was sent the color of the lock part. Thank you for your response.
I feel the strength around the handlebar is improved by the clean machining.
Separately, I also purchased the Swing Arm from GCraft and was pleased with the beautiful machining and accuracy.
View detail
unrated
It is a beautiful processing and wonderful, but Handle lock stayLeft Side interfered with Handle lock stayLeft Side and could not do Handlebar Lock. I think there may be individual difference of the vehicle, but it is not right at all. I think that the difference between the individual difference of the vehicle, but it does not fit at all. View detail
If you want to wear a steering damper on your GROM, I recommend it!
This time, I've been planning since last year "GROMSteering Damper Installation The parts required for the installation of the steering damper are the same as the parts required for the purchase of the Steering Damper other (esp. people) Steering Damper Bracket for GCraft:GROM is This product, on Net "GROMSteering damper If you search for the Steering Damper Bracket for GCraft:GROM, you will find Hit I had collected information on the Net before I bought it, but when I actually bought it and took it in my hand... The product quality is as described in the GCraft! It's measured and you can feel GCraft's enthusiasm for their product
GCraft:Be careful when installing the Steering Damper Bracket for GROM The points you put on [JC61-130 edition] Do not remove the shroud/inner and install it! If you install the Bracket, the Clearance of the Bracket is Limit Shroud/Inner will not be able to be installed afterwards (sweat) and FrameMounting The bracket is divided into three parts First of all, the Plate and Post part of BracketLeft Side are assembled and then Steering Install it to the head Next, mount the Plate of BracketRight Side across the Frame It is temporarily assembled with Bolt In that case, because there is a shroud and Inner, the work is Large strange It is recommended to have Assistant to help you if he is around Once the whole tentative assembly is done, you will need to turn Steering to Quantity:Pair (for Left and Right) Check if there is no interference with the Top Bridge by turning it off at the top of the bridge Bracket and Top Bridge and Shroud-Inner Clearance are Limit! It does not interfere with other parts of the body It does not interfere with any other part of the body It is really a product that was strictly measured in every detail by GCraft Finally, the M5Bolt and M6Bolt are tightened with the prescribed torque Installation is complete
After the installation of the Frame, the next step is the installation of the Steering OEM Handlebar Clamp with Dilts Japan:OPTop Indicator GCraft:Steering Damper Bracket for GROM The Handling Instruction Manual states Only OEMHandlebar Clamp can be installed I was worried until I installed it, but I was able to install it with no problem The Handlebar area became lively and cool
View detail
Anti-shake leg
The legs are designed together with the car is very beautiful colors, lightweight, strong, unique shape. , easy to install.(translated by Google Translator) View detail
Convenient when available
I am using it with ZOOMERX.
We, 173 cm tall, when I got a full eyes at Handlebar, my knees were hitting Handlebar, but I got hit by 3 cm Up and my waist became easier.
With 3 cm Up, you can install without changing to Long wire by just changing the handling of the Wire.
View detail
Fits: HONDA etc, HONDA GORILLA, HONDA MONKEY
Ignition key to relocate ...
I purchased it because it was necessary to relocate the Ignition key when exchanging Headlight for external company.
In my car body there is no installation space and I attach M6's Tap to Frame and attach it.
Ignition key itself is made in China, but it can be attached without problems.
It is recommended that you can install cleanly.
View detail
Fits: HONDA etc, HONDA GORILLA, HONDA MONKEY
Main key relocation
As a result of Headlight exchange, Main key was relocated. Large I am very satisfied with the stamp of gCraft with beautiful goods! For mounting holes m6
The installation position will be limited.
View detail
If we can compromise even the price.
In addition to this Kit, Steering damper Clamp is necessary.
I purchased Hyper pro as Manufacturer recommended but total is over 50000 yen.
This Bracket itself comes with very accurate tightly.
Neck is still a price.
View detail
I got a Steering damper
Even if you ride a Motorcycle with Steering damper at least once
It is people's feeling that I want to attach it in original Chari, too,
But in the case of Grom, every Manufacturer also has Bracket
I do not have anything to put out, I made it my own universal product
I installed it with Bracket. (Photo)
Exclusive Bracket will be released from Mr. GCraft this time
As soon I tried to punch it.
Damper diverted from being at home
When I install it, it is cute, is not it
Are you!
As expected, Guran san will do it.
I forced it so far, so Handlebar Lock
I could not do it, but I can do it properly
I am happy that it came to be.
Also, in addition to Damper, Active Clamp
Because it becomes necessary, it is painful to spend expenses.
View detail
I do not sell it wrong
When I fell down, I bought it because Footpeg Bar End got scraped.
Unfortunately I did not put on my Footpeg Bar, but I am sorry for selling such Small Parts.
It was better if Size wrote it.
View detail