Reviews
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
Great looks. as a cap bolt….
Do not over-tighten or apply Screw lock agent by mistake, as the material is material and will quickly lick the hex holes.
I want to install it firmly because it is for fixing Stay which supports important parts around Handlebar ….
View detail
Fits: DUCATI SUPERBIKE Panigale V4 R
About Quality
The appearance and ease of investigation are not a problem, but the length of the terminals of the connector with the vehicle harness may be uneven, and the response of the button is sometimes poor.
Also, since the two outer buttons hit the throttle housing, there is a limit to how far outward you can push the brake lever, so I felt that the Blue and Green buttons should be spaced about the same distance as the Red and Black buttons to allow for a wider range of mounting positions. The position of the buttons could be more flexible.
View detail
Ideal for Panigale Bar end mirroring
Used on 899 Panigale.
I purchased this bar end because Panigale has screw threads cut into the handlebar, and if the normal bar end is installed, the screw threads will be crushed and the normal bar end will not be usable.
The Pitch and O.D. were the same as the OEM product.
Note that it is necessary to purchase a Bar end mirrorMirror or similar that matches the Bolt diameter.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
It might be a good idea to replace it with a bar end mirror.
I think the price is a little high.
It is necessary to seal the OEM mirror hall to replace the bar end mirror, but I think it is also necessary to fix the MONSTER S2 Fluid Tank with a mirror hall.
Material:Because it is aluminum, there is a high likelihood that it will be tightened with too much force or licked during removal.
This is the second time I have purchased this product, but it was licked on removal and needed to be replaced.
A little It will be dressed up around the Handlebar.
I have purchased Red before and this time I chose Red again.
View detail
Fits: DUCATI XDiavel, DUCATI STREETFIGHTER848, MV AGUSTA F4 RR, MV AGUSTA F4 RC, DUCATI STREETFIGHTER S, DUCATI Multistrada 1200S, DUCATI STREETFIGHTER, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER1100EVO, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI 999, DUCATI 848EVO, DUCATI 848
Accent around Handlebar
I bought the Red color for the accent around the handlebar.
I chose the 150mm Short because it would not be damaged in case of moss.
I think the installation is normal.
The short design makes it feel a little heavier in the grip than the OEM model, but this is not a problem if adjusted with the adjuster.
The Adjuster has 5 levels, so you don't have to think about the Large size of your hand, and it is Large sturdy.
The instruction manual is the same for all CNCRACING products, but the simplest one is "Quantity:I think it came with 1pc.
I think it has been in use for over 2 years and there is no fading of the Anodized.
View detail
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100/S, DUCATI MONSTER1100EVO, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI Multistrada 1200S Pikes Peak, MV AGUSTA F4 RR, MV AGUSTA F4 RC, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, DUCATI XDiavel, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER
Short Type.
I bought the Red color for the accent around the handlebar.
I chose Short so that it would not be damaged when cocked. It felt a little heavy when I held it, but I had changed the Clutch slave cylinder to a large size, so I think it is the same as the OEM one. Also, since there is an adjuster, I don't mind if I set it to a position where I can easily apply force.
I think the installation is normal, but if you are concerned about rattling or anything else, you should have it done at Shop.
I use it quite a bit, but strangely Anodized does not fade.
View detail
quality
It is very soft. I had to do some additional work on the hole, but it looks like it is probably a 5000 series in terms of feel when machined.
Also, the surface treatment is not hard anodized, so be careful of scratches when installing.
Position-wise, I think it depends on the type of car and the size of the person, so 3 stars.
View detail
Fits: MV AGUSTA Brutale 3 cilindri 800, MV AGUSTA Brutale 3 cilindri 800, Others
I can't get it on my s1000rr 2018.
I really lost money buying it.
The response was shitty and I'm not sure how I'm going to make a decision after being told if I'm fit or not. I felt like why do we have to give out all this information? It's a good story that we can find out by ourselves.
View detail
So bad
I bought it just to see the fit.
Pitch does not fit on BMW S1000R
It could not be installed.
BMWPitch1.5.
If you're considering buying one, you're in the right place.
It's a shame because it's a great looking part with good texture.
View detail
Fits: KTM 990 SUPERMOTO T, KTM 990 SUPERMOTO R, KTM 1190 RC8R, KTM 950SUPERMOTO, KTM 690ENDURO R, KTM 990SUPER DUKE, KTM 690DUKE R, KTM 690DUKE, KTM 1290 SUPER DUKE R, KTM 1290 SUPER ADVENTURE, KTM 1190 ADVENTURE R, KTM 1090 ADVENTURE R, KTM 1090 ADVENTURE, KTM 1090 ADVENTURE, KAWASAKI Z800, KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ER-6n, KAWASAKI ER-6f, HONDA CBR600RR
Bar end mirror countermeasure
I bought it for fixing the Reserver tank after installing the Bar end mirror.
The product Page says something unintelligible like RightHand or LeftHand, and at first I thought it was wrong.
I bought Right Screw and had to return it.
If you want to make it easier to understand for Japanese people, please write something like Left Screw or Opposite Thread Screw.
View detail
![Jacket Hole Pump Brembo/MirrorThread M8 SINISTRA [CAVALLOTTO POMPE BREMBO - FORO SPECCHIO FILETTATURA M8 SINISTRA]](https://img.webike-cdn.net/catalogue/images/41061/CV013B_CV013R_TS.jpg)
Fits: YAMAHA YZF-R1, MV AGUSTA F4 312 R 07-08, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F4 1000 13-15, MV AGUSTA F4 1000 00-06, MV AGUSTA F3, MV AGUSTA DRAGSTER 800RR, MV AGUSTA F3 800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE990R, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R
No way.
I bought this product because I thought it was Accent around Handlebar of my 2014 MONSTER S21200S.
When I tried to install it, it didn't fit perfectly and there was a little gap.
I thought there was a possibility that it shifted by some shock and the vibration of MONSTER S2, and returned it to OEM.
I don't know if it is a quality issue with Single Item or not. I didn't feel like installing the other one. I think I got the wrong one because it is a foreign manufacturer, but I can't help it because I like the manufacturer.
View detail
Fits: Others
It was perfect for my DucatiSCRAMBLER 800!
Unlike other models such as the ICON, the DucatiSCRAMBLERFlat truckPRO has a low handlebar position.
It also feels too wide. So I looked for a non-OEM Product and found this one.
It is necessary to drill holes for positioning the Switch and Throttle, but if you have a Small Type Electric Drill, you can replace them in about an hour.
The actual width does not change, but the Grip position is now about 5cm higher, which makes it feel less wide and very nice.
View detail
![Handlebar End [B-COLOR]](https://img.webike-cdn.net/catalogue/images/37768/CM231R_TS.jpg)
The World of Self-Satisfaction
In a word, it's all about looks...maybe just the Brand power of the CNC. To be honest, I mistakenly thought I was buying it for the Counterweight. As a result, I bought Inner Weight separately and was satisfied with that, so the effect is OK. Lastly, the installation was excellent, the instruction manual did not disappoint, and the translation (not enter here. I looked carefully at the diagram, thought about it, and installed it. I am anxious to know how far to tighten it up. View detail
Stylish.
A very stylish Bar End.
It is easy to install, but it is different from other Bar Ends.
View detail
The construction is beautiful.
I bought this product because the Rubber portion of my previous CNCRACING Lab One Grip was quite worn out.
As with the Lab One, the Inner on the Throttle side was installed using the OEM's.
I'm looking forward to seeing how long it lasts as I felt the lab one wore out surprisingly quickly.
The only difference in design between the Lab One and the Lab One is the shape of the Grip end, which is the inner side of the body when worn, is different.
View detail
surprisingly slow
The Grip part is made of rubber. This part, especially the LeftGrip, is wearing out faster than I expected and I decided to replace it after a little over a year.
I liked the design and the Anodized paint job nicely, but the durability was not as good as I thought it would be.
View detail
Fits: DUCATI HYPERMOTARD821, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD821
Spacer for Handlebar Post.
I bought it along with CNCRACING's Handlebar Post because I changed my Handlebar from OEM to rizoma's DragType and it was 2cm short of the height to pass inspection.
It also comes with a Bolt for mounting.
I've been using it for about a year since it was installed and have had no problems.
View detail
Fits: DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821
I like it.
I bought it together with RiserUpper because I changed the Handlebar from OEM to rizoma DragType one and it was not high enough for inspection.
Since the Handlebar is a rizoma, I thought about getting a rizoma one, but I went with the CNCRACING one because of the looks.
I was worried about the strength and durability because the area in contact with the Handlebar is smaller than the Handlebar Post of OEM, but it has been more than one year since installation, but there is no problem.
The price is reasonable, but it is imported from Italy, so I think it is standard.
View detail
Isn't it a good look?
I put it on for a change of pace. It's a nice touch. First time I've been delayed in my arrival, no spec. but it's a shame. Good luck with the next one. View detail
Fits: MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1078RR, MV AGUSTA BRUTALE R989, MV AGUSTA BRUTALE 910S, MV AGUSTA BRUTALE 910R, MV AGUSTA BRUTALE 750S, MOTOGUZZI Griso, KTM 990SUPER DUKE, KTM 990 SUPERMOTO T, KTM 990 SUPERMOTO R, KTM 690ENDURO R
Processing necessary
Installed in the 2016 model ZX-6R. Machining is necessary because it can not be attached to this type. Visibility can not be expected for Mirror of this hand, but it is hard to see the idea. Because Mirror is colored by Blue, I do not feel dazzling so much. View detail