Reviews
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Buckhorn Handlebars
Great product with good workmanship. Bought the dent bar.Have to drill holes for internal wiring when installing the handlebars and does not need to extend the cables from my previous bar. View detail
Fits: HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON Dynamo Dell, HARLEY-DAVIDSON XL1200C SPORTSTER 1200
no problem
No different from OEM Product 。 This is the second time I've had to replace it, maybe it's where it breaks down quickly.
This is helpful for those who can fix it themselves.
View detail
Fits: HARLEY-DAVIDSON Universal
I think it's good
Mounted on a PullBagHandlebar with Handlebar height.
I am satisfied with the long shaft, which allows me to fix it at the point I like.
View detail
Fits: HARLEY-DAVIDSON Universal
M8 FAT BOB was Exactly in Mirror.
It looked smaller than the OEM Product, so I was a little nervous when I saw it in the mail, but I was able to install it on my M8 FAT BOB without any problems. View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
More than 2 years
I have been using it for over 2 years and it stays in very good condition. View detail
Preferred Handle position
We were able to set the handlebar in a position that was within the acceptable range for the vehicle inspection. When installing the handlebar, there was no interference with any of the equipment around the handlebar, and the work was smooth. (about 1.5h) I am very happy with it. I think I will be able to keep riding it for the time being. The price is also very good and I can give it high marks. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
OEM and same as etc. products
The HarleyOEM Snap ring was rusted out so I bought this product instead.
The impression is that it is built to be quite rigid, just like the OEM.
Snap rings are inconvenient because you need a special tool to attach them, but they are useful because bolt etc. will fall out if you don't wear them.
I am very satisfied and will try to buy this product again next time.
View detail
Fits: HARLEY-DAVIDSON Universal
The longer it is, the easier it is to see!
I couldn't see the short Type's so I bought the long ones.
Easy to see!
View detail
กระจกมองข้างทรงกลมพร้อมขาหนีบเพิ่มลูกเล่นใหม่ให้แก่ตัวรถจักรยานยนต์ของคุณ รายละเอียดสินค้ามีความเงาและชุบโครเมี่ยมที่ดี View detail
Fits: HARLEY-DAVIDSON Universal
It is almost invisible.
If you are only looking at it, you will be satisfied, but not as a Mirror.
You have to twist your body to see behind you.
View detail
Easy to grip!
[How is it used?
busy
Was the one you received as per Image?
Street Image
Was the installation difficult?
This was my first time replacing a lever on a Harley, but it was easy since all I had to do was pull the pin.
How was your experience with it?
I had the impression that the thin one was easier to grip than Harley's thicker Lever.
[Included Parts:were they on?
Reinforcement Spring
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
important point
⇒Pivot pin is hard to pull out without a tool.
View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
buy grip red
Good grip and comfortable to use.
Best of all, the fit is great.
It fits perfectly on the handle and is used well.
Grips must be purchased to fit the handle well.
It would be perfect if you buy it by referring to the purchased photo.
I'm driving an 883r and it fits perfectly here. -------------------------------------------------- -------- Grip feel good and good. Above all, the fit is good. I use it well for the handle. The grip must be purchased well with the handle. It would be nice to buy the purchased picture and buy it. I'm driving the 883R, but it's perfect here. Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON V-RODFamily
Grip replacement
I like it because it is very easy to grip. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Pimping is not possible, but the cosmetics are good.
I purchased this product because OEM is expensive. As other people have commented, the hole where the cone enters on the lever side is full of BALI and needs to be corrected by Fileetc. However, considering it as a consumable item, the cost is good. View detail
Fits: HARLEY-DAVIDSON Universal
Select a car model
Considered UnderMirror and purchased for a slightly different application.
As a result, the length did not match.
If there is room in the Handlebar and Tank, such as a lightweight Off car, it could be done.
I might have opted for the other longer one.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily
Handle position adjustment
The handlebar width is almost the same width as the OEM handlebar and passed the vehicle inspection. I think it is good that CruiserMotorcycle riders can enjoy Chopper-style and Bobber-style. View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily
automobile inspection approved goods
The width of the handlebar was almost the same as the OEM handlebar width, so it passed the inspection. The vehicle height was measured with the speedometer in the NORMAL position, so only the width was noted. I am satisfied with the position of the handlebar. View detail
It worked for now.
At least it worked for now;
I am concerned about how far it can be used.
I hope it is Large sturdy…
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily
buckhorn handle
Delivery is fast too
The packaging was excellent, so it came without damage.
It is difficult to install the handle by burying the wire, but it is difficult to work by pulling the wire out
It's not very difficult.
Definitely changing the steering wheel makes the position itself more comfortable and it's so good.
It's cheaper than other companies and it's so good!
Recommended! -------------------------------------------------- -------- Delivery is fast It also made the packaging excellent, so I came without a wound. It is difficult to reclaim the handle, but it is difficult to remove the wiring. It's not very difficult. Certainly changing the handle, the position itself makes it easier and so good. Compared to other companies, it's cheaper and so good! Recommended! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Grip review
The price is reasonable and seems to be cheaper than other companies.
Delivery is fast too
The packaging came perfect too! I love it!
The color is nice, but it's a pity that it burns a little.
Anyway, I recommend it!
If you want to make a classic bike, I really recommend it! -------------------------------------------------- -------- The price was appropriate and it was cheaper than other companies. Delivery is fast The packaging is perfect! I like it so much! The color is also good, but it's a pity that the time is a little burned. Anyway, I recommend it! If you want to make a classic bike, I really recommend it! Powered by Google Translator
View detail