Reviews
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Minimoto MONKEY Handlebar Clamp
I purchased this product because I replaced the 6V OEMMONKEYFront fork with a 6V GORILLA, and I wanted to install the HURRICANE Mini condor that was attached to the GORILLA, but I knew that the for MONKEY Top Bridge cannot be attached to the GORILLA's Handlebar Clamp, so I purchased this product. I decided to purchase this product because the position and diameter of the mounting holes of the Top Bridge are different between MONKEY and GORILLA, and the price is reasonable. When I installed the Handlebar Clamp, the position of the Handlebar was about 10mm forward, so I can use it without any problem. View detail
Pipe Handlebar/Clamp, but as a Fog Lamp/Clamp.
I was looking for a clamp for the Fog Lamp, and since the Pipe diameter is 22mm and it is an M10 Bolt, I thought it might work, so I did some research and found that it might work, so I purchased it.
I wanted to hang it straight down from Clamp, so I was satisfied.
Of course, Bolt and Nut are purchased according to their length at the time of installation.
View detail
I'm glad I bought it, it's a RECOMMENDATION!
[How is it used?
Purchased for MONKEYZ50J.
I bought a high throttle kit because I couldn't pull the Axel with OEMThrottle when I used MikuniVM22 for Carburetor.
Was the one you received as per Image?
I bought it because the price was low, and I have the impression that it is better made than I expected. It has a simple structure, but I am satisfied with its solid construction. I think it is a product with perfect cost performance.
Was the installation difficult?
I was a bit confused at first because I did not have the Instruction Manual, but all I had to do was remove the screws from the cover of the Throttle and insert the wire into the handlebar.
You can find out more on YouTube and other sites.
Just a note, the handlebar needs to be replaced if you want to use it with 4LMONKEY's First Model Type. the brake lever is welded to the handlebar, so the high throttle kit will not fit properly.
How was your experience with it?
It worked perfectly. I like the way the Throttle pulls and returns. I think it's a good product at a reasonable price, so I think it's worth a try.
[Included Parts:were they on?
It comes with a Grip for LeftHandlebar.
[Was there anything that disappointed you?
Nothing in particular, but if I had to say, it would have been nice if the Instruction Manual had been included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Fitted to a Gorilla
ive fitted this to a Honda Gorilla that is black and it ties in well, paint was in good condition and the product was exelent View detail
Round and roundHandlebar
The workmanship is shoddy, the Bolt is press-fitted at an angle, and it's the worst. As expected of CHINA View detail
Round and roundHandlebar
The workmanship is messy, as expected from CHINA!
Knobs and Bolts are press-fitted diagonally, and there are many Wounds on the Body.
View detail
Size matched Connector is a Honda car (GORILLA) does not seem to fit the
Size matched.
Connector is a Honda vehicle (GORILLA) does not seem to fit the
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Polished
Purchased due to concerns about peeling paint.
Recommended
View detail
Fits: HONDA Ape 50, HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 50, HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Highly recommended!
Highly recommended!
It motivates me because I can see it while driving.
It's a CustomPoint, and a quick clean look makes the Motorcycle look beautiful!
It's better to close it with masking tape so it won't get scratched!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
OK for Universal
[How is it used?
I chose this one because my current Switch was not working well and I wanted to replace it.
I chose the cheapest price, and I trust Minimoto products to a certain extent because they are not that hit or miss, but they are not that miss either.
Was the one you received as per Image?
It is exactly as shown in the image. It is not as chunky as I had imagined.
Was the installation difficult?
Instruction Manual included.
How was your experience with it?
I thought the lights were going bad because of the Switch box, but it didn't change when I changed it. It seems to be the Harness on the body side. It's so lame....
[Included Parts:were they on?
Instruction Manual was included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wiring is made quite long, so it is also Universal.
View detail
Inexpensive, but the texture is good.
This product was changed from HondaJAZZ OEM. All you have to do is remove the Nut on the back, remove the OEM, and install this product with the included screw. It looks great and shiny. The only thing is that the height is the same as the OEM, so it would have been nice if I could have bought one size larger (missing). View detail
Adapted for Grom
The Silencer Switch on the Grom is the opposite of the one on the MainMotorcycle z900, so I had to change it. I also bought 9p, 6p, 4p and 2p cape russeting from Amazon.
It took me half a day to complete the installation. It took almost half a day, but the installation was completed safely. I'm very happy with the look and feel.
View detail
a little cheap-looking
Bought it to make a Bar handle for HondaTODAY.
Spec. so there is no problem to install.
It looks a bit cheap.
The price is right, so I'm satisfied.
View detail
Blinker is now Push cancellation!
I used to use the OEM type switch box, but it became very troublesome to return the Blinker while paying attention to the position when returning it, so I replaced it with this switch box that becomes Push cancellation. It is a Switch box.
But the modern Material:Because of the Plastic, it does not seem to fit the atmosphere of the vehicle.
And there is no ON/OFF Switch for Light, so it is always on.
Those Demerits are there, but it would be very helpful to have Blinker as a Push cancellation.
View detail
I am satisfied
I have been wanting to wear this Grip for some time now, and now I have purchased it! 。 I am satisfied with the price I can easily afford 。 I love the Retro-ness of it! 。 I think it feels a little thicker in the grip. 。 It's going to be fun to drive now. View detail
For Headlight Bracket
I used it for TW200 HeadlightCustom
It's helpful to have a variety of diameters to choose from
TW has a Fork diameter of 33mm, so it's a Quantity:2pc. I bought a set
It seems to be quite beautiful like an Aluminum Cut-out, and the Anodized seems to be hanging
Only the Screw hole had a little Rose, so I think it's better to put the Tap through it
Headlight Bracket, Meter and Brake's Reserver Because it can be used as a clamp for various mountings, it is my personal standard parts
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
The product is a good one
I wanted to use PASSOL as a squeezing handlebar, so I diverted it It is easy to fit in Cover if it is a little more thin meat It is easy to fit in the cover if it is a little more flesh View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's not a special product, but it comes on properly
I bought this because I wanted to put on a squeezed hand
It hits the Cover a little, but it fits somehow Processing is not necessary, but a little effort is needed for installation
View detail
Fits: HONDA MONKEY
It is good for usual but ...
Purchased for Dax's Handlebar. The texture of the Aluminum base is also good, and since Screw is long, it can be attached to Dax without problem. It also looks good..
However, since Sciron part is Aluminum, I am worried about strength, but I sell it with this, and I think that there is no problem because I think that it is a place not subject to load.
The top part of my vehicle is Plating, so I switched to the Plating Specification of shiftup after all. It was not possible to get Dax over there, and the length of Screw was short compared to minimoto, but I was able to install it normally.
Both are attached to Dax, so I think that it is good to decide which way to do with Aluminum base or Plating.
View detail