Reviews
haughty
I used it in RCS and had about half left over.
Unlike Company B's KRear hose, it is not translucent but beautifully transparent.
Flexibility is not good, and the inside dents when bending.
I heard that if you bend it through another Tube and put it in boiling water, it bends well.
I don't know how durable it will be in long-term use, but so far it hasn't sweated.
View detail
It's going to look good.
Transparent Tube.
I wanted to extend the hose of the Reserver and decided to make it transparent anyway! I bought it with the idea of making it transparent.
It uses Project mu's Green Fluid, which looks Skeleton-like.
It is also useful for air venting because it allows the user to see air bubbles that have accumulated in the hose during air venting.
View detail
Babyface Reservoir Tank Hose
When replacing the brake master cylinder, replace the black of the Reservoir Tank Hose. [Color] I bought it to change to Clear. I am happy with the look and feel of the KRear hose. View detail
Hose while replacing Master Cylinder. [Color] Clearly.
Hose while replacing Brake with RadialType. [Color] Cleared.
I bought it because I heard it was hard to sweat.
To bend it, you need to soak it in hot water, but once it is bent, it is fixed, so that is convenient.
[Color] Clear, so it's easy to check the air bleed.
View detail
Note the curvature
Since it is so much effort, I used it with Green Light color Fluid, which is more White than pure transparent. [Color] It's like Smoke.
You should not use a vehicle with a tight handling due to poor flexibility, or you should buy a longer Size and make it go around Large.
The inside is a little dented due to the way the picture was taken, just installed, so durability is unknown.
There was another part number for Rear, so I bought it, but both front and rear were this size.
View detail
Improved FluidHose texture
It improves not only the appearance but also the texture of FluidHose. View detail
Skeleton
ReserveHose was sweating, so I decided to replace it with a Skeleton one if I was going to replace it.
It's nice
View detail
Emphasis on appearance.
As mentioned in other reviews, if you insert a thin hose and dip it in hot water, it will turn a little better. View detail
I think I could have used a regular BlackHose…
I bought this product to try it out to see if it was available.
I think it looks better with Active's with Color and Fluid (I use Yamaha OEM).
There is a description in the instruction manual that it is possible to use it without changing that much with normal Hose, and conversely, there is thickness and hardness as much as normal BlackHose, but it is possible to bend it while heating it with hot water of 60°C.
However, I thought that BlackHose would be safe when I thought about whether it would come with YellowHose.
I'll continue to look at it and add to it if I hear anything.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Mesh is good.
The normal rubber hose will cause water droplets to come out around the hose.
With Mesh hose, you don't have to worry about that.
I also always use mesh hose because it is safe from external shocks.
The length is 10 cm, so if you want to use it longer than that, you can't use it.
View detail
Brand
Price is cheap for Brand.
Length is cut according to your own model and used.
In 996 I cut it a bit when used on the Clutch master side.
Thanks to bremboOEM
Oil There was no leakage, installation was also easy.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It's pretty solid..
Hose is thick and reinforced with Mesh, and it is better than Rubber hose.
I am a bit curious, so I take a moment to bend it. I do not want to apply the bending force on the Nipple part. Since the price is not high at all, I think it would be better to buy it a little longer and cut it.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Too good firm or too bad
We replaced it together with bremboRCSMASTER.
Although the texture is good, after six months of assembling like an image Brake fluid has blurred from MASTERNipple.
Although it is good Hose, weak part when used with ShortElbow shape too much "MASTERNipple this time" It takes a burden on the part and it is not good.
View detail
The price was cheap,
Reserver tank & Bracket 1 type Purchase for replacement.
The price is cheap for making brembo, but the delivery date took quite a bit Minus.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
[Webike Monitor] It purchased with Radial-master-izing of a brembo this time [ ]. Since it is the Mesh type, it is a little hard feel, but he can feel easy about the part intensity portion. Since the Hose clip was also atta
[Webike Monitor] It purchased with Radial-master-izing of a brembo this time [
].
Since it is the
Mesh type, it is a little hard feel, but he can feel easy about the part intensity portion.
Since the
Hose clip was also attached, the rest was able to carry out length adjustment and was able to attach it immediately.
View detail
This is used for the Master cylinder of a brembo although it is natural.the Fluid -- also oozing out -- it can feel [ cannot be and ] easy and use.
This is used for the Master cylinder of a brembo although it is natural.the
Fluid -- also oozing out -- it can feel [ cannot be and ] easy and use.
View detail
[Webike Monitor] It purchases in order to move the Master tank of the Clutch. Since it moved without [ that it is long ] becoming elapsing when Hose length was about 100 mm, it was good. -- it -- once -- a brembo -- being pure -- however --
[Webike Monitor] It purchases in order to move the Master tank of the
Clutch.
Since it moved without [ that it is long ] becoming elapsing when
Hose length was about 100 mm, it was good.
-- it -- once -- a brembo -- being pure -- however -- being nice .
Since only the after [
] Hose is contained, it is necessary to prepare the Hose band of phi 10 separately.
View detail