Motorcycle Master Cylinder Tank Cap / Reservoir Cover Reviews

Filter

Write a review and get Webike Points!

Reviews

AluminumBillet master cylinder cap[DCR]Type-3

KN Planning

04 Mar 2024

AluminumBillet master cylinder cap[DCR]Type-3

Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE

Japanese Webike user

1/5

Don't leak.

Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment. View detail

ZETA

27 Feb 2024

Brake Reserver Cover

Fits: SUZUKI 250SB, SUZUKI DJEBEL250XC, KAWASAKI KLX140L, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250, KAWASAKI D-TRACKER125, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X300, KAWASAKI KFX450R, KAWASAKI KFX700, SUZUKI RMX250S, SUZUKI DR250R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L(S)

Japanese Webike user

5/5

Red is Fashion!

Can be installed with a single screwdriver.
Recommended for dress-up appearance.
Packing was reused. View detail

ZETA

03 Oct 2023

Reserver Cover

Fits: SUZUKI DRZ400SM, SUZUKI DRZ400S, KAWASAKI VERSYS-X300, KAWASAKI KLX230, YAMAHA XT250, HONDA XR250MOTARD, HONDA XR230MOTARD, SUZUKI LT-Z250, SUZUKI LT-Z400Z, SUZUKI LT-Z400, SUZUKI LT-R450, SUZUKI DR200S, SUZUKI 250SB, SUZUKI DJEBEL250XC, SUZUKI DR250R, SUZUKI RMX250S, KAWASAKI KFX700, KAWASAKI KFX450R, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X250

Japanese Webike user

5/5

ZETA Reserve Cover

I replaced it with ZETA's AnodizedRed because it is uniform. The texture etc. is very good! View detail

KN Planning

14 Jun 2023

CNCMaster cylinder cap

Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA XT250X, YAMAHA WR250, YAMAHA TW200, YAMAHA TW225, YAMAHA JOG90

Japanese Webike user

5/5

Recommendation to dress-up around Handlebar

[How is it used?
Installed on a PCX125JF56. the brake master cylinder cap had deteriorated considerably and was very dirty, so I decided to buy this product which can dress-up the cap.
Was the one you received as per Image?
I am very satisfied with the product, the texture and appearance are better than I expected.
Was the installation difficult?
It's easy, just remove the OEM brake master cylinder cap and put it in the same position. I used the supplied bolt to secure it in place.
How was your experience with it?
I am glad I changed it because it is a One Point around the Handlebar and the Tension goes up every time I drive. It is a little Custom, but I think the quality is very good for this price.
[Included Parts:were they on?
It contains an attached fixing Bolt.
The OEM bolt can be removed with a Phillips screwdriver, but I think the supplied special bolt is hexagonal.
[Was there anything that disappointed you?

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

KN Planning

20 Apr 2023

AluminumBillet master cylinder cap[DCR]Type-3

Japanese Webike user

3/5

"cool

Cool, but the O-ring is thick and deforms when tightened.
Oil oozes, although it is not clear if that is the reason or not. View detail

KN Planning

09 Apr 2023

AluminumBillet master cylinder cap[DCR]Type-3

Japanese Webike user

4/5

I like the colored GuardCover.

Install the diaphragm so that it does not bite, but this is not particularly difficult. Since the installation is changed from a cross screw to a hexagonal screw, be sure to install with the proper torque so as not to overtighten.
I was a little concerned about the fact that it says "Made in Taiwan" and "Parenthesis" on the lid.
I have been using it for over a month now and have had no problems with it. View detail

Billet Aluminum Master Cylinder Cap [DCR] Type 3

KN Planning

16 Sep 2022

Billet Aluminum Master Cylinder Cap [DCR] Type 3

Fits: HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA VTR-F, HONDA GROM, HONDA NSR80, HONDA NSR50, HONDA NS-1, KAWASAKI D Tracker, KAWASAKI NINJA250R, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KSR-1, KAWASAKI KLX300, KAWASAKI KLX250

Japanese Webike user

5/5

PetitAttachment Good cost performance

I think this is a great product for a little pre-Attachment.
The work can be easily done by simply installing Screw.
I put it on in a way that matches the color of the BIKE I ride. View detail

KN Planning

04 Sep 2022

Billet Aluminum Master Cylinder Cap [DCR] Type 3

Japanese Webike user

5/5

PetitCustom with good cost performance

Basically I like NORMAL, but as a PetitCustom it's inexpensive and a little Fashion!
It's easy to work with, just replace Screw with Hexagonal Wrench.
Highly recommended! View detail

ZETA

25 May 2022

Reserver Cover

Japanese Webike user

5/5

Simple and cool.

It used to be just... "Z" I was using a Mark-only lid, but I found this one and replaced it as soon as I found it. The design looks good on any car model. View detail

ZETA

26 Apr 2022

Reserver Cover

Japanese Webike user

5/5

Dress-up

It is completely dress-up, but the scraped pattern of aluminum is very parenthesis. To install, simply replace the NORMAL. View detail

ZETA

16 Feb 2022

Brake Reserver Cover

Fits: KAWASAKI KLX230, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI KLX140G, KAWASAKI KLX140L, KAWASAKI KLX140, KAWASAKI KDX250, KAWASAKI KLX125, KAWASAKI KDX220, KAWASAKI KDX125, KAWASAKI KSR80, KAWASAKI KSR110, YAMAHA RAPTOR700, KAWASAKI KSR50, YAMAHA YFZ450, YAMAHA RAPTOR250, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR155R, YAMAHA XT250X

Japanese Webike user

3/5

For Dress-up

I installed it on my Dress-up, but immediately replaced it with a NissinMASTER.
If it is a replacement from OEM Black, it will be noticeable.
I thought it would be quite effective in changing the texture and appearance.
I think ZETA Blue is a good color.
There is no change in brake performance with these parts. View detail

ZETA

30 Jan 2022

Reserver Cover

Japanese Webike user

1/5

Unfortunately, it didn't.

Returned because it was found that the product did not fit before installation. View detail

ZETA

15 Nov 2021

Reserver Cover

Japanese Webike user

5/5

New Model.

I used to use Blue of the old model, but I chose Red along with the change of the exterior. The satisfaction is high because it is the Parts that always comes into sight. View detail

ZETA

15 May 2021

Brake Reserver Cover

Japanese Webike user

5/5

Be careful of spills.

"Just remove the OEM Product lid and install this one. However, if you are not careful, you will spill Brake fluid, so do not be careless and install it.
The installation itself is super easy and I think anyone can do it.
If you spill everything, it will be troublesome later, so be careful about that. View detail

ZETA

04 Dec 2020

Brake Reserver Cover

Japanese Webike user

5/5

MOTARD, I know you're persistent about Motocross, but it's a zeta?

XR250MOTARD, used on an infinite limited edition car.
There is no particular change in performance, but the Material:It is made of aluminum, so it does not rust and is lighter than the OEM Steel.
And what's more, it's zetaQuality without the HaGap! View detail

ZETA

29 Dec 2019

Brake Reserver Cover

Japan User(translated)

5/5

For Dress-up

Since I've been using blue for various parts of my dress-up, I'm going to use this &hellip ;
Tightening Screw is not included, so it is an OEM diversion
This is a self-satisfying product, so please refer to the pictures I gave it 4 stars because the costumes are not cheap View detail

KN Planning

30 Nov 2019

CNCMaster cylinder cap

Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA FTR223, HONDA CBR400R, HONDA FORZA250, HONDA CBR250RR, HONDA CBR250R, HONDA CB400F, HONDA 400X, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA CYGNUS X

Japan User(translated)

5/5

The planning is good for a variety of Parts I'd like to see a little more price … if possible! But you can rest assured that it is a reliable manufacturer View detail

ZETA

13 May 2019

Brake Reserver Cover

chaminda

5/5

zeta brake reserver cover

i using master brake cylinder cover zeta.become smart locking .if zeta cover are perfect fitted in cylinder. item are nice color and high quality parts. i do recommend. View detail

ZETA

16 Apr 2019

Brake Reserver Cover

Japan User(translated)

2/5

I can't install it, even though it was specified in the car model list

I bought it when it was compatible with KSR2
Large than the OEM Cover and could not suppress the Diaphragm
I was looking forward to it, but I'm very disappointed View detail

ZETA

08 Jan 2019

Brake Reserver Cover

Japan User(translated)

4/5

catch one's eye

In use with WR250X

It's a very satisfying part of the ride that you'll see
I am concerned about the deterioration of the Anodized because it is easily exposed to direct sunlight View detail