Reviews
Fits: Others
Used in the reservoir of the rear brake
I found out that the Brake Hose is a little different from the others. View detail
Fits: Others
COSPA0 and reliable Hose
Used in GSX1300R GSX1300R HAYABUSA Initial Model
I have changed my brake master to GALE SPEEDVRC, and I got this product when I switched my reserve tank to Nisshin.
This product is one of the most reliable Reservoir Tank Hoses commonly available.
Sweating phenomenon with Reservoir Tank Hose made by another company in the past (Brake fluid seeps out by penetrating the hose) experienced in the past.
And that is not under the use of a special Fluid, but with FOR JAPAN MODEL4Manufacturer's OEM Fluid.
In that case, we received only a curt reply that we had not checked the functionality of all the Fluid products on the market, so please use our own Fluid product.
On the other hand, this product is made by Nisshin, which is adopted by many MotorcycleManufacturers as OEM.
At least there will be no problem with OEMFluid from FOR JAPAN MODEL4Manufacturer.
Also, I personally use a lot of BF4 on wakos and even then I have never had a problem in the past.
Neck is about the diameter.
When used with brembo's MASTERCylinder, this product cannot be used as it is because the nipple diameter does not match.
Needless to say, this product can be used in the case of Nisshin, and in the case of GALE SPEED, it can be used because it comes with a replacement nipple for two different diameters.
This is a part that is too simple to pay attention to when changing a spec. that has a lot of flair, such as when introducing an external Brake master, but that is why we recommend choosing a highly reliable product that hits the right spots, such as this product.
View detail
Fits: Others
Cut to required length
I bought it because I wanted to make the hose longer to compensate for the lack of fluid capacity when replacing the Brake masterTank with a Small Type Clutch masterTank.
It is convenient because it is 330mm long, so you can cut and use only what you need.
View detail
Fits: Others
To the part where the parts do not come out.
Since parts are not available only for old cars, you can Piping with this product even if the shape is a little straight. View detail
Kindness!
I bought it for Overhaul of NISSIN Forged Radial master.
I haven't used it yet, so I haven't evaluated its effectiveness.
OEM Parts are separate with Packing included.
Cylinder has Packing built into it.
It is very kind and grateful only for the most time-consuming work.
View detail
Fits: Others
Purchased to change the mounting position
When I changed to the Nisshin radialPump, the standard hose was too short and I was not sure if I should change the bracket or extend the hose to change the position.
Honestly, just cut the Hose and put it on yourself!
It's so service-like. [Contents] I wish I had.
View detail
Is it useless?
I bought this tank to make a new one because the MC21's reservoir became dirty, but the hose was short and the hose was not usable.
It's not for the MC21, though, so I don't blame you.
View detail
Fits: Others
I used it for STREET TRIPLE!
I needed a longer hose to move the reservoir to another location so I decided to use this one. The softness and the flexibility of the layout is GOOD. View detail
A must-have for S-1 maintenance
S-1Front brakes master cylinder maintenance Purchased
I couldn't order from YOSHIMURA head office, so I searched for information on the Internet I fished around and came up with this component
The fit was perfect
A must-have for regular maintenance
View detail
Fits: Others
Fluid seeps
Posts from other people
"Mobile Brake fluidDOT 3" Fluid blurs on the surface of Hose in a few days when injecting
Once it is discarded and putting HondaBrake fluid DOT 4 there seems to be no problem
I would like you to note that.
Since there was a similar description in another person, I think that it is product performance
Keep in mind
A description of another person
ー
"Brembo Brake fluid LCF-600 PLUS" When infused, it seeps from the surface of Hose to the amount of Large as if sweating
I think that it is better to be careful when using Fluid other than DOT 4
View detail
Fits: Others
Just use it for cutting.
Although I was worried about exchange, angle, etc. because I got a Motorcycle scratched a bit, I was worried so soft and durable, so I could install without worrying, there are clasps to stop Hose, sold separately, but at least two I thought it would be nice if it came in. View detail
Fits: Others
Hose for Fluid So it is expensive?
【What made you decide the purchase?】
If it is Hose made by Nisshin, the quality is Large I think that it will be durable.
【How was it actually used?】
I used Kawasaki H2's Master cylinder Resverver tank to attach it to the Radarphone of the Flanders. I was worried about the inner diameter of Hose, but it was just Exactly. Because Hose is quite flexible and soft, if you bend it with a small radius, Hose collapses. Fortunately this time it was possible to install almost linearly, so there was no problem.
【Was it difficult to install? (Hard parts case)】
Installation is not difficult because Hose is softer.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Just to be sure, I sprayed Silicon spray a little inside Hose and inserted it.
[Is there anything I was disappointed about?]
A little worried about the softness of Hose. Because it does not mean that high pressure will be applied, even this will be Large sturdy.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that the price is high because Brake fluid is a special product that does not permeate? I feel a little expensive for Rubber hose. Please make it a little cheaper if you can.
【Have you compared items?】
Tank hose which cuts out at 10 cm of GALE SPEED. I did not know how many centimeters it would need this time, so I purchased a longer Hose, but eventually I only used 8 cm w
View detail
Fits: Others
It's Hose, right? - - -
Material : Since it is a Rubber item, deterioration will surely come and the timing of exchange will arrive.
It is a Hose for Fluid, so it is thought that it is variously thought, but it is expensive.
I think that it may be better to make it cheaper.
Even if it remains, it will be deteriorated when it is next used.
View detail
Fits: Others
Reliable NISSIN
My own car is a little old car, 20 years since production ended strongly, the OEM Parts Number also soared, the price of Rear masterHose that was damaged was also just Hose It was price.
So choose this Hose.
Prices are OEM 1 / 2 or less, Material also feels the same as OEM.
It was good to be Lineup as Repair Parts!
View detail
Clutch masterCup
Cup of Nisshin radial master has been replaced due to aged deterioration due to resin cracked at the attachment part. It is troublesome to bleed the air from Fluid but it is satisfactory to repair. View detail
Fits: Others
Hose extended
I installed the tank set for NissinRadialPump on the Master cylinder of GALE SPEED via Tanks' table of POSH,
Unfortunately, the attached Hose was too short, so I bought a new one.
Cut it while using Fitting and use it.
Hose clamp (It is not attached to this Hose) I used what was attached to the Tank set.
I used Kawasaki OEMFluid, but it does not bleed out, and I am steadily delivering Fluid to MASTER.
View detail
Because the original tank pipeline rupture, Purchase repair parts, shipping fast, very correct angle of size with the tubing.
Because the original tank pipeline rupture, Purchase repair parts, shipping fast, very correct angle of size with the tubing. View detail
Although he wanted to purchase only a Hose in fact, since only this Set was found, it purchased.If it changes to , however a Tank, yellowish color of the surface will also be lost, and I will change by this Set after all, and will think that it was go
Although he wanted to purchase only a Hose in fact, since only this Set was found, it purchased.If it changes to
, however a Tank, yellowish color of the surface will also be lost, and I will change by this Set after all, and will think that it was good.
View detail
Fits: Others
[Webike Monitor] Since it was seeming for the Fluid to ooze little by little and to erode the Rubber of the Hose when using the Hose for the Gasolines, this was regarded as unsavory and purchased exclusive elegance. Since it is the elegance only for
[Webike Monitor] Since it was seeming for the Fluid to ooze little by little and to erode the Rubber of the Hose when using the Hose for the
Gasolines, this was regarded as unsavory and purchased exclusive elegance.
Since it is the elegance only for
, the phenomenon which naturally gets the sweat of a Fluid is also lost and he has no complaint.
View detail
Fits: Others
[Webike Monitor] It purchased for Rear-brake MASTER exchange of GSX-R1100. There was wall thickness, even if it carried out impossible management somewhat, it was not crushed, but since accommodation was effective, it has been processed into safety.
[Webike Monitor] It purchased for Rear-brake MASTER exchange of
GSX-R1100.
There was wall thickness, even if it carried out impossible management somewhat, it was not crushed, but since accommodation was effective, it has been processed into safety.
View detail