Reviews
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Available for frando 7nb
Let's try to change frando 7nb to MechanicalSwitch View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Used for frando 7nb
We used the same shape as brembo for frando 7nb.
The following three products, including this product, can be used for MechanicalSwitch conversion.
We chose Gold for the Accent this time, but Black products are also available.
https://www.webike.net/sd/21995643/
Ladybird Ladybird:LBP-BS1000
Mechanical Type Brake Switch
https://www.webike.net/sd/21216231/
KOHKEN KOHKEN:KOK-2031TI
Push Rod Pivot Brembo Radial Master
https://www.webike.net/sd/21216233/
KOHKEN KOHKEN:KOK-2030TI
Lever Pivot Brembo Radial Master
View detail
cool and solid
I installed Kohken bleeder bolt on Brembo 19 MCS brake master cylinder, it fit very well and solid. I've chosen titanium coast treatment, it look very cool. View detail
Bleeder Bolt for Nisshin Caliper MASTER
The OEMBleeder Bolt had deteriorated, so we replaced it with this Bleeder Bolt made of Stainless Steel.
Material:It is Stainless Steel, so the weight is the same as OEM, but I am very satisfied with the detailing, rust resistance, and black color.
I had also purchased a ZETA Titaniumium breeder bolt before buying this product, but later realized the existence of this product and repurchased it.
Material in terms of price:It is the same as Titanium, but I was attracted to the fact that it is black, the same color as Caliper, so I had to use a Titaniumium breeder bolt.
View detail
Replacement of Bleeder Bolt on brembo Master Cylinder
Before the CORSA CORSA Corta OEM Brembo Master Cylinder bolt rusts away, this Material:I replaced it with a Stainless SteelBleeder Bolt.
Common Material:I was looking for something as quiet as possible, because Titanium and other materials would be Gold shiny, and I found this BlackXCoat, and the price was very reasonable.:I was hesitant to buy it because it was not much different from Titanium, but I had some points saved up.
Compared to the OEMBleeder Bolt, the finish of the Screw section and seat surface is very carefully done and the quality is very high.
However, this product is Material:Stainless Steel, priced at Material:It is about the same as the Titanium one, so I guess it comes down to weight or Black Finishing.
That said, the difference in weight is only 2 to 3 g, so it may be better to select a product based on appearance according to one's own preferences.
Black on Titanium may require special processing? Black on Titanium may require special processing.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
I used it for 14RCS. The length is not right.
I used it on a 14RSC. I have a CORSA Corta on another Motorcycle, and since I have also replaced the leverPivot on that one, I decided to replace it this time as well.
For some reason, the length is longer than OEM, so the Screw pile pops out from the Reverse side.
The nut can be tightened securely, so I think there is no problem with performance.
Reverse side is not so visible, so recommendation is given to those who do not care.
OEM Pivot is Steel and will rust in a few years.
If you want to use it for a long time, it would be better to replace it.
View detail
Stopped!
I have been suffering from oil seepage from the bleeder bolt (bremboOEM) on my bremboRCSMASTER for 6 years and replaced it with a new OEM bleeder bolt. It has been a week since I installed this product and the leakage has completely stopped! 。 If you are suffering from oil seepage, it is worth a try. Tightening torque should be less than 20Nm. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Good Quality & Packaging
The item is good and was packed properly. It's fit to my radial brake & clutch. Nice finishes and brank marking. Very good product. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Good Quality & Packaging
Good quality and was packed properly. It fits nicely in the radial brake and clutch. The finishes of the material is seamless. Overall product was excellent. View detail
Good Quality & Packaging
The item is fit in my radial brake. Good quality and was packed properly. I like the engrave brand letter on the bolt. The item is durable. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
Not bad quality... but...
Since I went with the brembo RCSMASTER, I switched to this for durability.
Accuracy is perfect and rigidity is not a problem.
It's also black, so it doesn't look like it's been replaced! It is a natural finish.
As for the dissatisfaction, I think that it is because it is common use with Clutch, but Screw allowance is long and there is too much.
If I say it is not conspicuous because it is reverse side, it is not conspicuous, but it is the part which becomes a little anxious.
I'm sure this was probably done with the retrofit switches in mind, but the RCS brake master has standard equipment switches, so it would have been better if there was a version with a shorter screw allowance.
View detail
Match the color of Caliper
Since I replaced it with brembo black, I replaced it with this one for color matching and rust prevention.
The quality is not a problem at all because it is a Koken Brand, and I felt that the Wrench to be used is even better because it becomes 10mm from 11mm.
The material is Stainless Steel, so be careful not to over-tighten.
View detail
Higher quality than brembo OEM
The motivation for the introduction was iron Bleeder Bolt corrosion on the NORMALRear caliper.
My regular shop noticed corrosion during vehicle inspection maintenance and replaced the OEM product, but there was no corrosion on the Front and it was untouched.
I have been using 40mm pitch brembo universal casting for the Front (I'm the second generation and I've been using it for 7 years, and the first generation Brembo caliper lasted 36,000km for 17 years). The purpose is to extend the life of the caliper.
The ability to convert from the rarely used brembo OEM 7/16Inch (11.12mm) size to the frequently used 10mm size is another motivation.
The texture and structure are both good, etc., so we'd like to expand to the rear caliper as well.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
It's a bit of a letdown for me.
Material and BlackXCoat are very good!
The Manufacturer's name Initial is located in an unseen location in the product photo
[K] I'm sure you'll be able to find a way to get rid of it on your homepage.
If not, it's like K from Sae's bonito.
Manufacturer name is written on the same as Jacket etc. Parenthesis bad
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
KOHKEN KOHKEN
Material and BlackXCoat are very good.
I think it's a small price to pay if you can prevent rust and get out of this part.
But as you can see in the photo, KOHKEN It's honestly dumb that it's missing KOHKEN.
If it's written in cursive, it's still a little better.
Why do they put the manufacturer logo in there for the sake of it, like KOHKEN?
I think sales would be better without the Manufacturer logo.
I wonder what MotorcycleParts and Apparel officials think.
And also, We-Big, the same Parts in different colors should be available on the same page, but these Parts are separate, and they're also available in a mysterious system that you can buy if you ask while Manufacturer is out of stock. The Review may be in storage.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
To prevent rust.
The brembo Push rod Pivot is very rusty.
That's why I changed to KOHKEN KOHKEN Push Rod Pivot Brembo Radial Master.
Made of SUS304 with Titaniumium coating, it is resistant to rust.
The movement is also very Smooth.
If you keep your Motorcycle outside, these are the Parts you want to have replaced.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Again.
It's not a good idea to use a black mark to make it stand out, but I was disappointed to see a strange mark on the Top of the page & hellip; it's not OEM, so I filled it with black.
Titanium Coating or more expensive, but I could have used that one.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
very good
I was able to put it on just right, it's really good, but taking it off takes a bit of force but it's great. It looks really good. I really like it. Wherever I go, people are watching. I can put it right, it's really good, but when I take it off, it takes a little bit of effort, but it looks great and looks great It is recommended to buy. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
brake lever adjustment bolt
Brake lever adjustment bolt from Kohken for Brembo Radial Master White Logo and Red Logo The engraving is made of SUS304 Titanium Coating, golden color Kohken Brake Pads for Brembo Radial Master White Logo and Red Logo The engraving is made of SUS304 Titanium Coating gold. ( translated by Google Translator) View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Defective item?
As shown in the photograph, the cutting part (Both sides) There was BALI? And it was not possible to install as it was.
I managed to fix it with GoldFile.
It seems that there is no problem with the other review, so it may be an individual difference.
Apart from the fact that it has been refined, the shape - function - I think that there is no problem with finishing.
For Brembo Radial Master, but I installed it on the Fire - 7 NBRL 15 HA. Lever also Zita Flight charge lever - for Brembo Radial Master (ZS60-3720 Lever ratio18mm) It has changed to. Originally Brand - is commonly used with Brembo radial master so it can be used without problems.
We are converting to common size, but because the tip end of Push rod Pivot is slightly different from brembo, Koken Mechanical Type Brake Switch can not be used as it is and this product will be in turn.. High
*
Although it has a Hydraulic Brake Switch, it has a negative point on a faulty side or a fee Ring side, and when I looked for a Mechanical Type Brake Switch, I reached the Switch made for for Brembo Koken, - - Development. Although it was a land, it was expensive..
View detail