Reviews
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Available for frando 7nb
Let's try to change frando 7nb to MechanicalSwitch View detail
It's a bit expensive
Purchased for replacement with bremboRCS.
Cospa is not good.
More than that, I would have liked a little more flexibility in Bracket.
It will look and feel different, though.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Used for frando 7nb
We used the same shape as brembo for frando 7nb.
The following three products, including this product, can be used for MechanicalSwitch conversion.
We chose Gold for the Accent this time, but Black products are also available.
https://www.webike.net/sd/21995643/
Ladybird Ladybird:LBP-BS1000
Mechanical Type Brake Switch
https://www.webike.net/sd/21216231/
KOHKEN KOHKEN:KOK-2031TI
Push Rod Pivot Brembo Radial Master
https://www.webike.net/sd/21216233/
KOHKEN KOHKEN:KOK-2030TI
Lever Pivot Brembo Radial Master
View detail
It's bigger than I thought
Quality and texture information is not elastic compared to wrist guards It's installed to protect the brake fluid from direct sunlight for the feeling of use, but I'm not sure Size chart information monkey125 brake master cylinder is larger than Buy with cost performance and comparative brand preferences WeBike packaging is always great, arriving in a week for delivery and packaging There are several products to be concerned about when purchasing, but I bought yoshimura, but it is not fixed for sure because it is caught in the side mirror holder View detail
There is almost no freedom.
Brake's Reserver Hose is a moderately curmudgeonly one,
I was wondering if the person replacing it is not an amateur?
Is there no other way but to use Pattern? I had no choice but to look for this product,
The hose itself has almost no flexibility, so don't expect a Level that says "handling, etc." It's just the way it is.
When pointing the hose, apply a little silicon grease and it will somehow go in,
Included Parts:Band is not available due to space limitation, so I added a cap stopper in time, Hose, 2 kinds of Band, Material:I think AluminumCap and its content is good stuff.
The durability of the Hose will depend on the storage conditions.
It is stored indoors, so I hope they can wait a while.
View detail
rust
Used in GSX-R1000R 2019
Pivot bolt for GALE SPEEDVRCSeries.
Pivot bolts supplied with VRC rust quite early, but this product is coated with titaniumium, which gives it a gold color and improves rust resistance.
Incidentally, the VRESeries comes with this product from the beginning.
(Photo:VRE)
The drawback of the Largeest is that it is a Titanium“Coat”.
In other words, the base material is not Titanium.
Rust will slowly form around the hexagonal hole where the titaniumium coat is damaged by ToolMark.
(Although it lasts longer than VRCStandard Product)
Also, even though the processing is quite elaborate, the price is still a bit steep for a titaniumium coat.
For example, a famous company like ZETA makes a full titanium pivot bolt for bremboRCS.
These aftermarket parts options are VRC's Week Point.
Incidentally, the size of the pivot bolt is different from that of bremboRCS, so it is not compatible with bremboRCS.
As a Master Cylinder, the VRCSeries is excellent, and I sincerely hope that a full titanium Pivot bolt will be available.
In addition to the Bleeder Bolt.
However, this product is the only choice for a rust-resistant Pivot bolt, so it is the only choice for rust prevention.
View detail
Stopped!
I have been suffering from oil seepage from the bleeder bolt (bremboOEM) on my bremboRCSMASTER for 6 years and replaced it with a new OEM bleeder bolt. It has been a week since I installed this product and the leakage has completely stopped! 。 If you are suffering from oil seepage, it is worth a try. Tightening torque should be less than 20Nm. View detail
I wanted a lid and I cried and cried.
I originally used this for the MASTERReserver on the Rear brake, but when I noticed it, the lid just disappeared for some reason.
I wanted to buy just the lid, but it was not sold as a single body, so I bought the whole thing in the spirit of "it's cheap, so what the heck, I'll buy it.
Body is at home as a spare.
View detail
GALE SPEED Straight Nipple for Master Cylinder
The Nipple that comes with GALE SPEED's Rear brake master and Thumb brakes is L-shaped, so it was able to alleviate the forced bending of the brake hose. View detail
Master cylinder cap screw
The master cylinder cap was silver and the same color as the Screw, so it was changed to a Black colored Screw.
Surprisingly, Screws in the same shape and Black color are not sold in stores.
It's a small detail, but I think it has improved Parenthesis by adding a sense of crispness.
It is a recommendation because it is very inexpensive and only requires the replacement of Screws.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Overhaul is ready!
I'm glad it was Reasonable. View detail
Fits: YAMAHA Majesty S, YAMAHA Majesty S, HONDA Monkey 125, HONDA videotape recorder, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA GROM, HONDA GROM
Good vibes
I bought the Black Bolt because I felt that the attached Bolt was Silver and it didn't fit. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI Ninja250SL, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, SUZUKI GSX-R125, SUZUKI GSX-R150, SUZUKI GSX-S125, SUZUKI GSX-S150, HONDA CBR250RRR, その他 , KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250R
Improved returns
I had no feeling when I stepped on the brake pedal, but after I put this parts, I can feel the return feeling. View detail
brembo installation
This is for the brembo brake.
The shape is good, but it interferes as it is, so I installed a part to shift 20mm from the original position, and finally I was able to install it without interference.
It would have been nice if the Tank fixed Bolt was also Black, but I had no choice but to paint the Screw Black to make it less noticeable.
I wish the selling price was a little lower.
View detail
Not good, not bad, just average.
Well, this is what it looks like.
It's a GALE SPEED Hose, but it was meant for Active's Gale.
It's not a particular complaint.
The replacement itself can be done even by a beginner, but the air bleeding of Radial master cylinder takes a lot of time because air remains if it doesn't bleed on both Caliper side and Master Cylinder side.
View detail
Buy at the same time as Gale MASTER
I bought this at the same time as GALE SPEED's Elabo RateMODEL and Brake master cylinder.
Previously, the top-of-the-line model of the same brand "Elabo Rate. I bought the Clutch of I fell in love with its operability and high functionality and decided to buy it this time. Unfortunately, due to various reasons, I have not been able to replace it yet.
I thought about using Universal's Hose, but if there is a dedicated Hose, it is better to use it. I have not actually installed it, but when I put it together temporarily, I think that the compatibility with the reservoir Tank (Gale SPEED MASTER exclusive product) is not bad. As for the durability, we will have to wait and see what happens in terms of aging, but we won't know until we use it. Also, the diameter of the hose is designed for GALE SPEED, but it can be used for brembo as well. However, the length of the hose is different from brembo, so if you are careful about the length, you can use it for brembo.
View detail
![[Repair] ADVANTAGE Nissin Oil Tank For Type-RC](https://img.webike-cdn.net/catalogue/images/47433/_adfm-ta46rc_TS.jpg)
Is it useless?
I bought this tank to make a new one because the MC21's reservoir became dirty, but the hose was short and the hose was not usable.
It's not for the MC21, though, so I don't blame you.
View detail
Black is my favorite.
The color Black was chosen because the Handlebar area is unified with Black. View detail
Slanted?
YOSHIMURA's embroidery is slanted; it's a reason for this, because this is YOSHIMURA ? Or is there a manufacturing error?
As the other impresario said, it is Exactly to the dimensions of the Reservoir tank
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
The parts are good, but
This product can not be used in conjunction with Brake switch
You should write in the description
You can use hydraulic pressure
Oil pressure has a lot of failures
You can install it by processing
Since we are writing prohibition of processing and manual, images are not printed
View detail