Reviews
Fits: HARLEY-DAVIDSON SPORTSTERFamily
On behalf of the OEM!
There was a fluid leak from the rear cylinder of the 883R that I purchased. Buy RebuiltKit!
The components are as shown in the picture. I chose this one because I thought NeoFACTORY's Rebuild Kit would be sufficient.
The performance is neither acceptable nor unacceptable, the wFluid leaks have subsided and the Brake works well! Ta!
View detail
dirt prevention
I bought it to prevent staining of the Reserver tank and for dress-up
The product is well sewn and not cheap at all
I think Mr. YOSHIMURA's logo is also very cool
If I were to express my concern, I would say I'm worried about theft (Lol)
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
To improve the texture of the ZZr1400
Due to oil tank deterioration, I bought it to improve the texture of the oil tank if I were to buy it new. It's a 2006 model The texture around the Handlebar of ZZr1400 has been improved If you want to use it for other cars, you need to use Bracket and so on View detail
On the rusty side!
Whenever I buy a Motorcycle, I change it
Stainless steel, so corrosion is minimal, and it's always transplanted with timings for vehicle replacement You can also buy them at home center The price doesn't change much, or the numbers don't match up ConvenienceParts is convenient
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
It's useful enough
I changed it with the brake fluid when I changed it
It can be used for the same as the OEM Product, etc
Of course there are no Fluid leaks
I'm happy with it because it's less expensive than the OEM product
View detail
Fits: HONDA CB250F, YAMAHA YZF-R25, HONDA GROM, HONDA GROM, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, KAWASAKI NINJA250R, HONDA VTR-F, HONDA VTR250, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA CBR650F
Very cool
Just take the original off and put it back on! PetitCustom in less than 5 minutes!
It's cheap and I can see it when I'm riding it, so I'm very happy with it
Good purchase
View detail
Was good
The design is good and I am very satisfied with the fit In One Point, I chose Red because I thought Red would be brilliant Not only that, but I think the design and texture of the product convince me View detail
On the move to Tank …
I bought a rear master cylinder for my GSX1300R
The location of the OEM Fluid Tank is poorly maintained and we decided to relocate it
The 90-degreesNipple that came with the OEM was not aligned well … I replaced it with a StraightNipple from Option Parts
It took a lot of time and effort to make the tank bracket by myself, but I am satisfied with the performance and maintainability I've got it
View detail
To adjust the length
I bought a rear master cylinder for my GSX1300R …
I made various adjustments as I built it in
It's just not long enough … I thought about it You'd be quicker to buy it He said
I'm very happy with the way it works
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Ticket Master End
Top notch quality and perfect fitment which is expected from this company. Wasn't sure on fitment due to the M/C being a universal fit but well worth it in the end. View detail
preventive measure
Used in 2018 PCX KF30
In the past, Screw licked this part due to sticking, and I had a bad experience with it, so I replaced it
It's also black in color and unobtrusive
View detail
It's all in GALE SPEED
To match the GALE SPEED's radiphone installation, the Tank also has the same manufacturer I did
It's good because it can be rotated, so it doesn't put too much force on Hose
Also, you have to buy a Hose, Hose Band, Tank Bracket, etc And that's just for fun
View detail
Stylish Aluminum Cut-out RearMaster cap
The deciding factor in purchasing this product was the decidedly look! I bought it at first sight without comparing it to other products
Installation is simple and easy as you can replace the existing cap It is important to note that the cap will hit the stopper when installing or removing the cap So, if you loosen or remove the Fixing Screw on the car body side, you can replace the Cap with Smooth
There was nothing disappointing about it, it was the shape and color as expected
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
I knew Tank was cool
Front brakes master cylinder of YZF-R125'13 When replaced with the ZX-6R's OEM radial pump master cylinder, the H2 I diverted and exchanged the Tank of View detail
Is it possible to get something this cheap?
I changed Master Cylinder to DAYTONA Premier Zone
Honestly, OEMs will rust on any motorcycle, and I rusted on the FORZA
So this time I replaced it with a rust resistant Screw before it rusted
If it's 100, it's obviously here
It's never been this good
I Presented it to a Motorcycle friend of mine and he said he would be really happy to replace it with a rusty screw I think
How about a gift for your friends?
I will be buying again for my sister's rusty for PCX
View detail
Cool ( *´weed)
I've been using Wrist band and had a surplus, but this is an Exactly for Tank Large satisfied with Size
The price is also such a thing in Yoshimura
I chose the black one and the text is nice and tight and not blurry
ive... Logos feel small in ive Maybe (subjective)
View detail
goodness
Size is perfect for Master Cylinder! This is for Master Cylinder only, so it's perfect for you! View detail
A must-have for S-1 maintenance
S-1Front brakes master cylinder maintenance Purchased
I couldn't order from YOSHIMURA head office, so I searched for information on the Internet I fished around and came up with this component
The fit was perfect
A must-have for regular maintenance
View detail
Easy to install!
[What color did you buy?]
[Color] Smoke
【What made you decide the purchase?】
As the mounting part with the Bracket rotates and can be mounted horizontally at any angle.
【Mounting was difficult?】
Because the mounting part can rotate, it was easy to install as you thought!
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer ? Please let me know if there are any improvement points]
Bracket mounting part is for Brake horizontal only.
For Brake's Reserver tank Size, I would like a bracket attachment part that is vertical.
I will buy it as soon as it is sold!
[Others]
For Clutch, Reserver tank is Small.
Attention is usually required for the amount of Brake fluid.
View detail
Expansion tank, perfect for foot brakes
the expansion tank is also a visual treat and of course fits perfectly with the foot brake and should be ordered if the conversion option is possible. perfect technical and functional solution. processed absolutely great! The reservoir is also visually a treat and of course fits perfectly with the foot brake and should be ordered if the conversion option is possible. perfect solution technically as well as functionally. absolutely great processed! (translated by Google Translator) View detail