Reviews
cool and solid
I installed Kohken bleeder bolt on Brembo 19 MCS brake master cylinder, it fit very well and solid. I've chosen titanium coast treatment, it look very cool. View detail
Nice product
Hello everyone, this is a good product and I recommend it to everyone.titanium pin more light. This is 100% original, you can buy with confidence. also easy to install View detail
Nice oil tank
Hello everyone, this is a good product and I recommend it to everyone. Easy to install. This is 100% original, you can buy with confidence. View detail
Solid for the price
Solidly built, safe to use and looks good. View detail
Fits: Others
COSPA0 and reliable Hose
Used in GSX1300R GSX1300R HAYABUSA Initial Model
I have changed my brake master to GALE SPEEDVRC, and I got this product when I switched my reserve tank to Nisshin.
This product is one of the most reliable Reservoir Tank Hoses commonly available.
Sweating phenomenon with Reservoir Tank Hose made by another company in the past (Brake fluid seeps out by penetrating the hose) experienced in the past.
And that is not under the use of a special Fluid, but with FOR JAPAN MODEL4Manufacturer's OEM Fluid.
In that case, we received only a curt reply that we had not checked the functionality of all the Fluid products on the market, so please use our own Fluid product.
On the other hand, this product is made by Nisshin, which is adopted by many MotorcycleManufacturers as OEM.
At least there will be no problem with OEMFluid from FOR JAPAN MODEL4Manufacturer.
Also, I personally use a lot of BF4 on wakos and even then I have never had a problem in the past.
Neck is about the diameter.
When used with brembo's MASTERCylinder, this product cannot be used as it is because the nipple diameter does not match.
Needless to say, this product can be used in the case of Nisshin, and in the case of GALE SPEED, it can be used because it comes with a replacement nipple for two different diameters.
This is a part that is too simple to pay attention to when changing a spec. that has a lot of flair, such as when introducing an external Brake master, but that is why we recommend choosing a highly reliable product that hits the right spots, such as this product.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
The best
I put it on after processing and it is great.
I would like to see it sold with this Design from the original.
View detail
Rear masterReserve tank
There are three different reserve tank angle settings
Large Satisfied
View detail
Necessary when adding MASTER's Tank
[How is it used?
Touring and city driving
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Slightly stiff and difficult to install.
How was your experience with it?
It was good
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
There is none
View detail
Bleeder Bolt for Nisshin Caliper MASTER
The OEMBleeder Bolt had deteriorated, so we replaced it with this Bleeder Bolt made of Stainless Steel.
Material:It is Stainless Steel, so the weight is the same as OEM, but I am very satisfied with the detailing, rust resistance, and black color.
I had also purchased a ZETA Titaniumium breeder bolt before buying this product, but later realized the existence of this product and repurchased it.
Material in terms of price:It is the same as Titanium, but I was attracted to the fact that it is black, the same color as Caliper, so I had to use a Titaniumium breeder bolt.
View detail
Replacement of Bleeder Bolt on brembo Master Cylinder
Before the CORSA CORSA Corta OEM Brembo Master Cylinder bolt rusts away, this Material:I replaced it with a Stainless SteelBleeder Bolt.
Common Material:I was looking for something as quiet as possible, because Titanium and other materials would be Gold shiny, and I found this BlackXCoat, and the price was very reasonable.:I was hesitant to buy it because it was not much different from Titanium, but I had some points saved up.
Compared to the OEMBleeder Bolt, the finish of the Screw section and seat surface is very carefully done and the quality is very high.
However, this product is Material:Stainless Steel, priced at Material:It is about the same as the Titanium one, so I guess it comes down to weight or Black Finishing.
That said, the difference in weight is only 2 to 3 g, so it may be better to select a product based on appearance according to one's own preferences.
Black on Titanium may require special processing? Black on Titanium may require special processing.
View detail
A highly detailed piece in it's design
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a polished surface. About the feeling of use, A highly detailed piece in it's design and fits in with the styling of the bike better then the original plastic material rear master cap but is still a purely cosmetic upgrade. Products to buy together, G-Craft have an extensive range of add ons to improve the appearance of the Monkey and the polished aluminum heel plates would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the rear master cap for my installation was very easy due to the ease of access and simple nature of securing the cap. Cost performance and comparison with other products, The pricing of the product is great. You receive a decorative cap made from a quality material with a matching finish. There are a few cheaper options from other brands available but they don't go into such small detail to improve the look like G-Craft. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
ได้รับสินค้าเรียบร้อย จัดส่งดี แพ็คสินค้าดี View detail
Special tools are required
Familiar with Ducati and Gucci from the air-cooled era.
This is a Brembo brake master PS15 for ReplacementPiston from the round body era.
The MASTER with a front double disk is a large body of the MASTER from the mid 70's to the late 80's. The MASTER with a front double disk is a large body of the MASTER.
(Note:PS14 and PS17 are also available in the same design. If there is no engraving, you will have to Rose to find out)
In the Integra Le Braque era Gucci, the Rear master Piston is a Large body except for some models.
Originally, the replacement parts for Black Anodized Aluminum round bodies were iron pistons,
Thankfully, since the 1990s, for Race (GoldAnodized) The aluminum piston has been integrated into the same anodized aluminum piston as the
As with the MASTERBody, the aluminum material makes the inner walls of the cylinder less susceptible to potentiometric corrosion than iron pistons.
If the Cylinder is so corroded that you can feel it with your fingertips when you close it, it is Out.
Ahare, Mr. MASTER, who is poorly maintained, is going to the scrap bin. Arrivederci amore Ciao.
The brembos of this era used a deformed washer instead of a SurfClip to fix the position of the piston.
Pin punch of appropriate length for removing and installing the piston, and a special installation tool for inserting a new piston. (Discontinued) is required
The fact that you need a special tool means … I'm sorry if you bought a used car from a non-specialist store.
The 40 year old iron Piston is untouched and in place.
In rare cases, there are people who use a hollow pipe for installation without special tools.
The thin inside of the lever holder is always scratched when the holder has been damaged.
Specialized tools can be found in a store that specializes in ita-vehicles of this era.
So if you don't have special tools, ask a store. It is worth the labor cost.
View detail
Special tools are required
Familiar with Ducati and Gucci from the air-cooled era.
This is a replacement piston for bremboSmall diameter MASTER PS12 from the round body era.
Gucci FMASTER of 350~650 PANTAH and Integra Le Braque era is Large body.
It is also used by some Rear master of the same age group.
Originally, the replacement parts for Black Anodized Aluminum round bodies were iron pistons,
Thankfully, since the 1990s, for Race (GoldAnodized) The aluminum piston has been integrated into the same anodized aluminum piston as the
As with the MASTERBody, the aluminum material makes the inner walls of the cylinder less susceptible to potentiometric corrosion than iron pistons.
If the Cylinder is so corroded that you can feel it with your fingertips when you close it, it is Out.
Aha, MASTER-kun, who is poorly maintained, is going to the scrap bin.
The brembos of this era used a deformed washer instead of a SurfClip to fix the position of the piston.
Pin punch of appropriate length for removing and installing the piston, and a special installation tool for inserting a new piston. (Discontinued) is required
The fact that you need a special tool means … I'm sorry if you bought a used car from a non-specialist store.
The 40 year old iron Piston is untouched and in place.
In rare cases, there are people who use a hollow pipe for installation without special tools.
The thin part of the lever holder is always scratched.
Specialized tools can be found in a store that specializes in ita-vehicles of this era.
So if you don't have special tools, ask a store. It is worth the labor cost.
View detail
YOSHIMURA's Reserver tankBand
If you like YOSHIMURA, you will want to install Reserver tankBand.
Black was selected from among Red, Blue, Black, and Lime green.
Tension is increased when the Yoshimura logo is in view.
It makes the ride a little more fun.
View detail
Necessary Parts for bremboRCSRadial
What made you decide to buy?
Someday I'll get a brembo!" I have been envisioning this since I took delivery of my ZX-6R. Such is the year 2023. Brake Enhancement." I finally decided to install a 19RCS Radial Brake Master Cylinder as one of the brake enhancements, which is necessary since I don't have an oil tank. I chose the PLOT product because I found a lot of information about it.
[How was the installation?
First, attach the oil tank and bracket to the Master CylinderClamp and position it. SSMotorcycle also has a cowl and screen, so make sure the position does not interfere with them. After positioning, check the length of the oil hose and cut it. If you cut the oil hose too short, you will not be able to go back, so it is recommended to cut it a little longer for fine adjustment.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
How was your experience with it?
The custom feeling has increased immediately. I can't stop grinning over the Shield because it's the most visible place when I'm driving. (Mirror shield so you can't see it from the outside)
bremboMark is a nice One point.
View detail
it's recommended
It is great to be able to change the position of the Hose without difficulty. View detail
Galespeed reservoir
Great piece of equipment. Great quality. Gorgeous outlook. Top notch finish and workmanship. Feels great in combination with brembo p2 caliper. View detail
Galespeed
Great piece of equipment. Great quality. Gorgeous outlook. Top notch finish and workmanship. Feels great in combination with brembo p2 caliper. View detail
GALE SPEED Titanium Goal Pivot Pin for GALESPEED Clutch
[How is it used?
Used for Wire Clutch Holder Kit by GALE SPEED.
Was the one you received as per Image?
Elabo RateSpec. is equipped with Titaniumium goldCoated PivotPins from the beginning.
The normal Wire Clutch Holder Kit is iron-like and would help prevent rust.
Was the installation difficult?
It is very easy.
How was your experience with it?
It feels smoother and looks more Gorgeous.
[Included Parts:were they on?
Instruction Manual only.
When installing
For now, Grease was applied and then installed on the Wire Clutch Holder Kit.
View detail