Reviews
Easy Maintenance
lightweight and easy maintenance. Feel Racing. Beautiful. thank you webike for good product. because you can see the amount of oil in the line View detail
I like host color
Ready to use. Easy to install. Best product. I like hose color. I can see dirt in brake system. It beautiful and is not that expensive. View detail
GALE SPEED Pivot
This pivot is made quite nice. Increase the aesthetics of the product. It is not made of titanium but I like it. I wish it was made of titanium View detail
Fits: HARLEY-DAVIDSON 96-11 front master cylinder use vehicles (except for 04 and later XL and 07 and later FL)
Rebuilt
It was Large fun to put the last Seal. Although the product is a good product with high accuracy, I thought that it was better to ask Motorcycle shop for replacement. I think that if you are familiar you can exchange it immediately. View detail
To prevent Rust
I used GALE SPEED 's Clutch holder, but when I notice it suddenly Rust on the surface of Pivot pin ...
I am surprised that this is iron!.
Whether the Black coating on the surface is weak, Rust seeped out from the Edge part.
Since it can not be helped, exchange Pivot pin. While praying that it is Gold this time, but while wishing not to rust, pour Silicon spray all over, Pivot part painted Molybdenum grease and then incorporate. The work itself takes only about 10 minutes.
It is nice to be beautiful. Since Brembo of Brake master is also changing to Titanium's GoldPivot pin, (Lol)
Although it does not have the function as well as a function, it is perfect for a bonsai Motorcycle because its appearance is beautiful (Lol)
View detail
Mr. Jita
I think Cost performance is better compared to each Titanium Bolt 64 0 0 Or this was Set sales so do not measure Length Do not hesitate to purchase
Other Titanium Bolt and Nut also bought Size which is in Mr. Zeta
What I can say for all items is that they are good products together
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Cool
I tried putting on a trendy place.
Used in combination with Nisshin's separate body MASTER.
I installed it using Universal's Bracket and H Type Rubber.
It looks better than the original White Cup.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
A similar Pivot arrived at GPMachine
【What made you decide the purchase?】
At some time before Events, GPMachine (Was it Rossi 's Machine? A similar thing is attached to the Pivot of Brake lever of the Brake lever, and I thought that I would definitely put in the brembo Master cylinder someday when I put my brembo Master cylinder.
This time, I purchased & installed it after exchanging from Oremble of brembo to Cut-outLever of Other Company Product.
【How was it actually used?】
As Lever changed together, the shape of Lever changed and Impact is strong and the shadow is thin, but I feel that the feeling when I stroke Lever is not different from OEM's Pivot, to be honest.
Just at OEM's Pivot, the coating on the surface has already been scraped off at less than 3000 kilometers so you can check on how much improvement is the durability of Stainless Steel Material and Titanium coating which is the selling phrase of this product Maintenance can be confirmed later I think that pleasure has increased.
【Mounting was difficult?】
At the same time, the outside Cut - outLever set which was installed at the same time was a thing with a high degree of difficulty in installation, so we asked the Motorcycle shop, who was always indebted, to perform the installation work.
【Please tell me the installation point and hang】
When OEM or Nisshin 's Master cylinder, the Master cylinder itself was inexpensive so I was maintaining without thinking anything, but since the brembo' s Master cylinder is quite luxury goods, the Master cylinder is broken I think that it is better to use Torque for tightening so as not to.
Just fixing the Pivot with Hexagonal Wrench while loosening the Nut on the lower side of the master cylinder and replacing it.
If you are familiar it will not take less than 5 minutes.
[Is there anything I was disappointed about?]
It is longer and heavier than OEM's Pivot.
Regarding Length, I think that the clearance of Tank and Master cylinder is fatal to vehicles with Limit, but my car is NAKED of Pipe Handlebar so there is no problem.
As for weight, aside from Racer running with Circuit, I have not seen it as a problem, since it is not a thing which changes by Motorcycle used in public road to a few Gram weight and becomes heavy.
Rather it is more important for me to obtain durability Up and Dress-up effects of Stainless Steel & Titanium coat from Steel.
【Hope for Manufacturer - Please let me know if you have any improvement points]
None
【Have you compared items?】
- KOHKEN KOKEN (Formerly photo-irradiated) : Lever Pivot Brembo RCS Master BlackXCoat
I thought Black was also astringent, but that was not the same as OEM if that was it!.
[Others]
I think that there is difficulty in wearing on vehicles with Clearance Limit, but I think that this luxurious sense of presence is quite Cost performance although it is inexpensive.
When replacing with brembo's Master cylinder, how about another one Plus?
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
I think that it is a good product with good looking and no rattling.
I bought it to attach brembo MechanicalSwitch to FRANDO's Radial brake. I am satisfied that I can install Exactly. View detail
Solid product
bremboetc. A little Hose thin is not sold to the nearby Parts store so buy it with Wye Big.
Size is also Exactly also as an adaptation item.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
It looks good Parenthesis.
Although it is not necessary to change it, it is a casual one point that is cheap compared to NORMAL which does not pack with iron.
I like the engraving of GCraft so casually.
I feel a little expensive, but I am satisfied.
View detail
I wish the price was cheaper a little more
I purchased this item by looking into installing Yamaha Brembo on APE. It is good to make it because it is made by GCraft, but it was better if the price was a bit cheaper View detail
Nice quality hose kit. Found the end cap to be of a higher standard than the normal HRC type I have used in the past. Be sure to use very sharp cutters if tailoring the hose length as the rubber is pretty hard to cut cleanly
Nice quality hose kit. Found the end cap to be of a higher standard than the normal HRC type I have used in the past. Be sure to use very sharp cutters if tailoring the hose length as the rubber is pretty hard to cut cleanly View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
OEMMaster cup has deteriorated and replaced
OEMCup for 10R began to crack due to aged deterioration, so at this time I exchanged to the scaling type of spear.
It is very easy to install it for H2 just by removing Fluid and replacing it.
It was a good shopping, because the parties who entered the field of vision exchanged the satisfaction was also high.
Fluid is also recommended for the Green type of Active!
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Good appearance
It is an exchange of White muddy Tank with aged deterioration
Required parts are GALE SPEED's Bracket and FluidHoseetc.
I was allowed to refer to other people's impressions.
View detail
Fits: Others
Just use it for cutting.
Although I was worried about exchange, angle, etc. because I got a Motorcycle scratched a bit, I was worried so soft and durable, so I could install without worrying, there are clasps to stop Hose, sold separately, but at least two I thought it would be nice if it came in. View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Hi all, This product is of the highest quality and finish, fits perfectly and works great. I would highly recommend this to anyone.
Hi all, This product is of the highest quality and finish, fits perfectly and works great. I would highly recommend this to anyone. View detail
Hi all, This product is of the highest quality and finish, fits and works great. I would highly recommend this item to anyone.
Hi all, This product is of the highest quality and finish, fits and works great. I would highly recommend this item to anyone. View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Looks is the best.
Since Reserver tank was old and I did not like it, I bought it.
I am satisfied with Large although I am a little Large in my Motorcycle.
I was able to attach it to Brake of Nisshin.
View detail
Fits: Others
Hose for Fluid So it is expensive?
【What made you decide the purchase?】
If it is Hose made by Nisshin, the quality is Large I think that it will be durable.
【How was it actually used?】
I used Kawasaki H2's Master cylinder Resverver tank to attach it to the Radarphone of the Flanders. I was worried about the inner diameter of Hose, but it was just Exactly. Because Hose is quite flexible and soft, if you bend it with a small radius, Hose collapses. Fortunately this time it was possible to install almost linearly, so there was no problem.
【Was it difficult to install? (Hard parts case)】
Installation is not difficult because Hose is softer.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Just to be sure, I sprayed Silicon spray a little inside Hose and inserted it.
[Is there anything I was disappointed about?]
A little worried about the softness of Hose. Because it does not mean that high pressure will be applied, even this will be Large sturdy.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that the price is high because Brake fluid is a special product that does not permeate? I feel a little expensive for Rubber hose. Please make it a little cheaper if you can.
【Have you compared items?】
Tank hose which cuts out at 10 cm of GALE SPEED. I did not know how many centimeters it would need this time, so I purchased a longer Hose, but eventually I only used 8 cm w
View detail