Reviews
be extremely thorough, focusing on even the finest of details
Tank can be oriented 360 degrees to any desired angle. View detail
The transformation with the simple addition this rear master cap is amazing
About quality and texture - The rear master cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the over look of the original rear brake master cylinder reservior tank with all it's plastic finishes. The transformation with the simple addition this rear master cap is amazing and I am more then satisfied with the new look. Products to buy together - A product to purchase to add a more attractive appearance to the Monkey 125 cockpit area would have to be a master cap for the front but sadly G-Craft do not have a matching product available but luckly Webike have other silver anodized options to choose from. Difficulty of installation - The installation of the rear master cap is a simple task that took 0.1 an hour to complete. Common sense and the use of your hands is all that is required to screw the cap onto the reservior tank. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the rear master cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Available for frando 7nb
Let's try to change frando 7nb to MechanicalSwitch View detail
Look and feel
Tanks were changed to brembo 17rcs.
I could have used OEMTank, but I wore it for looks.
After all, satisfaction is Outclassing.
View detail
Fits: Others
Used in the reservoir of the rear brake
I found out that the Brake Hose is a little different from the others. View detail
It looks good and is functional.
Shrinking the Spring will also create resilience and give the Brake a "snap" feel.
It comes in many colors and can be matched with Motorcycle's colors.
The only thing is that the Pillow Balls can be machined, but the Mechanical Type Brake Switch requires a lot of machining to be used with the No-Brest Rear Sets. (MASTER is wearing Nisshin, for WR)
The hydraulic brake switch is not reliable, and I didn't want to put it on for the price, so I made my own Plate that pushes the switch.
I think you should write this part as a precaution.
I buy knowingly.
View detail
It's a bit expensive
Purchased for replacement with bremboRCS.
Cospa is not good.
More than that, I would have liked a little more flexibility in Bracket.
It will look and feel different, though.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Used for frando 7nb
We used the same shape as brembo for frando 7nb.
The following three products, including this product, can be used for MechanicalSwitch conversion.
We chose Gold for the Accent this time, but Black products are also available.
https://www.webike.net/sd/21995643/
Ladybird Ladybird:LBP-BS1000
Mechanical Type Brake Switch
https://www.webike.net/sd/21216231/
KOHKEN KOHKEN:KOK-2031TI
Push Rod Pivot Brembo Radial Master
https://www.webike.net/sd/21216233/
KOHKEN KOHKEN:KOK-2030TI
Lever Pivot Brembo Radial Master
View detail
I've heard that OEMs are concerned about Rust.
When I replaced the master cylinder cap, I was concerned about the Rust on the pure Normal Thread Screw, so I purchased this one.
The delivery was fast and Large satisfactory, and after the exchange it is very cool without any discomfort.
Thank you very much!
View detail
Dress-up
I changed it from TSR.
It looks great with Cowl's Red.
It is well made and just fit.
View detail
Genuine Yoshimura Reservoir Tank Cover in Green
A customer has a lovely example of a Kawasaki Ninja 900 which they wanted to add a cover for the brake fluid reservoir they have. I suggested this Yoshimura one in green as it would go well with the bike they had. Most brake fluid reservoirs that do not have a cover do seem to be prone to attracting condensation. The price was very reasonable and easy to find. It's for the 45ml tank. The shipping was brilliant as I purchased other items. It literally took a week to arrive with me. Upon receipt I was really impressed with the packaging from Webike. The quality of this cover is superb, I have had cheap copies before and they simply do not remove the condensation as the material is not absorbent. This howver is great as it appears to be a high cotton content which wicks up moisture really well. Looks great on the reservoir tank too. Thanks Webike for the service you provided View detail
Yoshimura Tank Reservoir cover / sock
I have purchased many Yoshi parts and accessoried in my time and this keeps being a go to for the reservoir cover. They just work great and do what are expected. This one was the black version with the "I've got the power" logo. The cover is great value and better than some of the other brands I have seen recently. The price was I believe a sale item which also helped. My orders are all shipped using EMS as they just deliver when I expect them to. 5 days from shipping and my order was delivered. Pretty good for the distance it travelled. The sock came in the Yoshimura packet and was also mounted on a piece of cardboard to keep it's shape. This cover was being added to the pretty black Suzuki GSXR 600 that has had a custom paint sceme and this black cover will fit with that perfectly. The cover itself has a really good tactile feel to it and is stretchy enough so that it does not loosen off and get lost during riding. This is not the case with a few of the other covers i have tried and this is why I keep coming back to Yoshimura ones. Very pleased with the purchase and the service I got from Webike. Brilliant!! View detail
Yoshimura Brake Reservoir Cover for Yamaha FZ1 Brembo Master Cylinder
The FZ1 I have is currently under a remodelling and the brake master cylinder was recently changed to a radial one with a separate fluid reservoir. I do like to have a cover on the reservoir to help stop leakage or condensation build up During colder months. The Yoshiumra cover was one I have used before on a different model of bike with great results. This is the only reservoir cover I believe Yoshimura so not a hard after market part to find. The ocst direct from Webike was excellent and believe it or not, I could not find a blue one anywhere locally. There were a few other items in my order and as I had them all shipped together, I did save a few pounds on shipping too doing this. My order was shipped as usual via EMS as I trust this courier. They get my order delivered to me in 5 days from shipping from Japan, that is a great time frame for such a long journey. The cover came in a nice little Yoshimura packet and kept nice and flat during transit. The cover is some cotton mix and has a really good absorbancy but also dries really wuickly as I soon found out after being caught out in a rainstorm. The cover dried pretty quickly and did not lose any of its shape or colour. I have had other reservoir covers before where they tend to lose colour really quickly and stop doing what they are supposed to do which is wick away moisture. This one has been superb so far. I have no complaints at all. Very pleased with this cover from Yoshimura. Thanks for the help Webike. View detail
Genuine Yoshimura Tank Cover Sock for MT10
After I upgraded my stock MT10 brake system with a radial master cylinder I had a bare reservoir. As these are prone to attracting condensation I though it only fitting to add the reservoir cover from Brembo. The price was very reasonable and easy to find. It's for the 45ml tank. Not to be confused with the clutch reservoir which is much smaller. The shipping was brilliant as I purchased other items. It literally took a week to arrive with me. Upon receipt I was really impressed with the packaging from Webike. The quality of this cover is superb, I have had cheap copies before and they simply do not remove the condensation as the material is not absorbent. This howver is great as it appears to be a high cotton content which wicks up moisture really well. Looks great on the reservoir tank too. Thanks Webike for the service you provided View detail
Attracted by the appearance, it was installed!
I was attracted by the look of the product as per the Title.
The vehicle model is ZEPHYR750.
I installed a black Gale MASTER to match Striker's Rear Sets, but the hose to the Reserve tank looked depressing, so I installed the said Aluminum Tank!
The area around the rear master is now refreshed and looks tighter.
However, the high price and low practicality (other than appearance) of the Aluminum Cut-out makes it a poor cosmetic choice.
View detail
It's bigger than I thought
Quality and texture information is not elastic compared to wrist guards It's installed to protect the brake fluid from direct sunlight for the feeling of use, but I'm not sure Size chart information monkey125 brake master cylinder is larger than Buy with cost performance and comparative brand preferences WeBike packaging is always great, arriving in a week for delivery and packaging There are several products to be concerned about when purchasing, but I bought yoshimura, but it is not fixed for sure because it is caught in the side mirror holder View detail
Parenthesis OK
I bought the Titanium color because it was the only one in stock at the time of my purchase, but I like Parenthesis.
MASTER is working fine for Corta CORSA.
View detail
Friendly to mods, tough on mechanics
[How is it used?
. at least as of August 19, 2019, and from the time of installation until October 8, 2023.
Mileage is at least 30,000 km
Mainly touring and occasional city driving circuit
Used with the same mounting bolt and location as OEM Fluid Tanks
Fluid used is active 4.0 and 5.1 (https://www.webike.net/sd/24038239/, https://www.webike.net/sd/24515708/)
Was the one you received as per Image?
As shown in the image, as shown in the Image.
Was the installation difficult?
Since the work was done with all Brake fluid removed, it was easy to remove the OEM, pull out the hose, cut it, attach it, and put the product on. The only hassle was that we had to bleed the air after that.
With the introduction of Rear Sets, we did not want to relocate the Tank, but we did not want to put the load of forcibly bending the Hose.
While other tanks have the hose outlet slanted directly down or toward the mounting bolt, this product, although slightly slanted, can be freely rotated 360 degrees for installation, allowing the hose to be installed in its OEM position with no waste and no load on the hose.
How was your experience with it?
It seemed to have the same capacity as the OEMTank, and there was no blowout when the pad was pushed back in the brake maintenance.
The Tank itself is not secured in any way other than being pinched, but it does not rotate or come off unexpectedly in any way.
I was concerned about heat in the center of the body, but no deformation or cracks have occurred yet.
The Fluid level is very difficult to check without any parts because there are parts that are sandwiched around the tank compared to a normal tank. When checking the Fluid level, it was necessary to illuminate it with the light of a Smartphone (Pixel 7 Pro) from the back. However, I don't remember checking it when it was transparent, so I don't know if it is the case with transparent Fluid.
[Included Parts:were they on?
I think I replaced the hose with a KIJIMA hose, and the hose clamp with a K-Con, but I have no record or memory of it, so I can't describe it.
[Was there anything that disappointed you?
I originally wanted a hose exit diagonally opposite to the mounting bolt. Since the wish was fulfilled, there is no need for installation.
What was unexpected was that the remaining Fluid amount was too hard to see as it was, so it would have been nice if there had been a warning note, even though it is possible to imagine to some extent.
This is the only product that allows the user to freely select the hose outlet, but the mechanism used to achieve this makes it difficult to check the remaining Fluid level.
I think this product is friendly to vehicles and modifiers, such as reducing the load on the hose. However, for those who perform maintenance (visual check of fluid level), the product is not so friendly as it requires one step of illuminating the product with a light.
View detail
Good
This brake master cylinder oil tank support with brembo oil tank look simple and the oil tank position is just right, not too high not to low.Good looking.I buy that with brembo rcs15,that is pretty match.When you know how to bleed the air , the installation is not too much difficult .That is little bit expensive but i think the looking is better than brembo .Webike shipping is fast and packaging is good. View detail
Perfect for color
After purchasing the z900rs cafe and installing it, the size is minimal and it covers the barrel exactly, which is perfect. The color matches the z900rs cafe perfectly and it's great that it holds it tightly. I need to buy a different color as a gift for my brother.
I plan to purchase again next time ---------------------------------------------- ------------ After purchasing the Z900RS CAFE, it is very perfect to minimally cover the size. I have to buy a different color as a younger brother gift. I'll buy it again next time Powered by Google Translator
View detail