Reviews
Along with Hose Replacement
The Hose was replaced along with it.
The Hose part was Red, so we installed Blue here.
The color is nice, but you have to be careful not to overtighten or lick the corners when tightening so that the color doesn't peel off.
View detail
A little disappointing
It is possible to install it like OEM. it is used for the front OUT side, the hole for the block fixation can only be installed in Small and SmallNut, and the use of Bolt is forsaken and fixed with Band, because Line comes to the center, I guess that Large hole cannot be processed. If there is a female screw on the frame side, there will be no problem. View detail
It's for GOODRIDGE.
In the column of the corresponding MODEL of the Page of the product of Active "Universal It only states.
WebBig's Page was the same way, and there was no mention of GOODRIDGE at all.
The product name of the actual item is "GOODRIDGE #3 Type S Handling which is called
So, shouldn't the name of the product Page also be listed as such? I think.
Other products are listed as being for GOODRIDGE, but only this product is not.
I left it for three weeks after I bought it, and by the time I figured it out, I'd already opened it.
I gave up on returning it.
View detail
The point is defective
Earls remaining and combined with Fitting, but I can not fix it until the end Fitting can not be fixed.
Loupe expanded Large and it seems that Screw has not been cut to the end and the rest 1 / Screw is not cut in 3 laps.
With this I can not screw up to the end.
The last one / I shuffled Screw for 3 laps and finally it became possible to screw it to the end.
View detail
Inspected good
When trying to connect to Adridge of Goodridge, Screw does not mesh.
I felt it was funny though it was a conforming item but when I confirmed it by expanding it with Loupe, BALI remained in Sheng Large in the first part of female Screw.
After removing BALI with File, Cutter and Tweezers, Screw finally got to mesh..
It must be said that it is a miscellaneous finish.
View detail
Since it was required to branch a Brake hose, it purchases. Usage only binds a Hose tight. although it will be simply bound tight if the square portion of the middle of T character is pinched with the bundle of the Hose part which faced e
Since it was required to branch a Brake hose, it purchases.
Usage only binds a Hose tight.
although it will be simply bound tight if the square portion of the middle of T character is pinched with the bundle of the Hose part which
faced each other with the
Spanner etc. -- with the bundle below T character --
-- a device is somewhat required.
Since
power cannot enter easily, it is insufficient with a bundle and cautions are required in a Fluid not leaking.
View detail
Although other Manufacturers may be the same one, if it does not bind tight and carry out, pressing [ a root does not have a screw thread by the side of a Caliper and ] down a Packing since the root part is thin, a Packing will shift from the center. Alt
Although other Manufacturers may be the same one, if it does not bind tight and carry out, pressing [ a root does not have a screw thread by the side of a Caliper and ] down a Packing since the root part is thin, a Packing will shift from the center.
Although I think that there are no worries about
Fluid leak, it is whether appearance is a little worrisome?
View detail
[Webike Monitor] Since he wanted to 直出 and carry out from a Front master by BMW F650GS, the Straight adapter of M10x1.0 for Brembo was used instead of the Banjo bolt. The Refreshing and the Hose were able to be managed as aim. It is kind th
[Webike Monitor] Since he wanted to 直出 and carry out from a Front master by
BMW F650GS, the Straight adapter of M10x1.0 for Brembo was used instead of the Banjo bolt.
The Refreshing and the Hose were able to be managed as
aim.
It is kind that the Crash washer of an Aluminum is attached like the Banjo bolt of the company.
View detail
This fitting adapter is the parts for adjusting the degree of setting angle of a hose. I exchanged by appearance serious consideration. There was [ whether whose affinity of working faces, such as a bolt, was bad, and ] a fluid leak in this attach
This fitting adapter is the parts for adjusting the degree of setting angle of a hose.
I exchanged by appearance serious consideration.
There was [ whether whose affinity of working faces, such as a bolt, was bad, and ] a fluid leak in this attachment.
Moreover, if these parts are not bound tight firmly, they will loosen very well easily.
If a front fork sinks applying brakes, a hose will bend, but that stress is applied in the direction loose to this adapters.
It is really dangerous, if it checks firmly and does not accustom.
Since it seems that it is expensive and it is not necessary to exchange so much, it is a three stars.
View detail
These parts were required in order to attach the fitting adapter of a brake. Even if it exchanges brake hose, it is seldom necessary to exchange this portion. The banjo bolt attached to a brake hose is enough. In my case, it exchanged by appea
These parts were required in order to attach the fitting adapter of a brake.
Even if it exchanges brake hose, it is seldom necessary to exchange this portion.
The banjo bolt attached to a brake hose is enough.
In my case, it exchanged by appearance serious consideration.
There was [ whether whose affinity of the working face of a hose and the working face of an adapters was bad, and ] a fluid leak in this attachment.
It reconstructs several times and has not leaked now [ Kon ].
Although many things were examined, it is a three stars and peevish, and it is ~.
View detail