Reviews
Fits: Others Brembo 14-19RCSfor Master Cylinder
Texture is nice, but expensive.
The quality is good, but it is expensive and the capacity is small, and there is no window, so the Fluid replacement is Large. View detail
Fits: Others
brembo
This is installed along with the change to brembo brakes.
Since the installation as it is causes interference, we managed to avoid the interference by adding a few offset parts.
Quantity:Set, I wish it were cheaper.
View detail
Cool!
The texture is nice and Parenthesis is good.
However, since the only connection to the Master Cylinder is the O-Ring, leakage is a concern.
View detail
Bolt Bend
I tried to replace the tank with a bremboOil tank. when I connected the hose and loosened the Screw to open the lid of the tank, the Bolt is obviously bent. Is it new? I had no choice but to bend it with pliers and put it on. There was no replacement screw. I wish I had checked it carefully before I put it on; View detail
It's going to look good.
[Color] Simply replacing the SmokeTank with the SmokeTank will definitely improve the appearance and increase the sense of custom.
The Fluid status is also easy to see, making maintenance easy.
View detail
Cool
Self-satisfied. [Color] Smoke is cool because it has a custom feel.
It's easy to install because all you have to do is replace it.
Items good to look cooler and better.
View detail
brembo for brembo!
Normally, this is a DIY job, but it is safer to leave it to the professionals, especially for BMW Motorcycle, which is equipped with ABS.
During the legal inspection, RCS was brought in for installation and Fluid replacement.
As a result, we got BrakeFeel, which is different from the OEM Magura.
If we wanted, the Bracket on the Cup could have been a little shorter.
View detail
Custom that can be done inexpensively.
The OEM white tank looked strange to me, so I replaced it.
Brake fluid looks good.
View detail
Generally satisfied with the appearance, the direction of the lid's restraint is regrettable.
[How is it used?
Introduced at the same time as Nisshin's Radial masterCylinder.
The function of the regular White Type is the same, but I introduced it for its appearance. I think it looks stylish now.
Was the one you received as per Image?
YES。
Was the installation difficult?
Easy if you are familiar with it.
It is necessary to drain all the fluid, so if you are not comfortable with air bleeding and other brake maintenance, it is better to leave it to the PRO.
How was your experience with it?
The appearance is generally perfect, but there is one thing that bothers me.
The bracket around the cap will face the driver side.
I felt it would be better if it was off by 90° either way if possible.
View detail
good-looking
The previous Tank was partially damaged, so this time [Color] Smoke
I was happy with the custom look and feel.
View detail
To Hydraulic Clutch
When I changed KawasakiZ1 to Hydraulic Clutch, I bought Radial Type of Nissin as Clutch master. At the time of purchase, only the Clutch master of White Tank was not in stock. [Color] In order to match with SmokeTank, we later added this [Color] I bought a SmokeTank.
I love the small size of the tank with the right amount of fluid for a Clutch master.
View detail
QualityUp!
Since I replaced the brake master with bremboRCS, I replaced the OEM white plus ticky Reserver with this one.
The fitment is different from the 15B, but I was able to install it without any problems.
The result is a very high quality finish with a good feeling.
The MONKEY125 is a 2-pod single disc, so there is no problem, but if you adjust the front of the double disk to the front of the small disk, the fluid capacity is not enough and it may cause trouble such as air bite. Let's use the thing of a proper capacity.
View detail
QualityUp!
Since I replaced the brake master with bremboRCS, I replaced the OEM white plus ticky Reserver with this one.
The fitment is different from the 15B, but I was able to install it without any problems.
The result is a very high quality finish with a good feeling.
The MONKEY125 is a 2-pod single disc, so there is no problem, but if you adjust the front of the double disk to the front of the small disk, the fluid capacity is not enough and it may cause trouble such as air bite. Let's use the thing of a proper capacity.
View detail
To blend in with the presence of Tank, which had appeared to be floating.
Used as a reserve tank for the MT-07's rear brake.
The OEM's bright white Reserve tank was quite conspicuous in the body, but by changing to a clear smoke tank, the impression became calm.
It is easy to install, but if you have never changed the brake fluid before, you should be well informed about the aggressive nature of the fluid and the dangers of air bites.
If you can, you can do it together when you replace the Fluid.
It is easy to access and the price is affordable, but it makes a good impression, so I recommend it.
PetitCustom.
View detail
It was easy to get there.
I bought this to replace my RadialPump with a brembo.
Fitting was not a problem either.
There was no interference with the Cowl and I had to adjust the Hose by cutting it a little.
View detail
Defective?
I drove about 1000km for about a month after installation and brake fluid started seeping out from between Cap and Tank. there was a similar Review on Amazon, but seriously no! I don't feel safe using it at all! View detail
Looks tighter than milk white color.
The original one was cracked due to hydrolysis, so it was replaced at the same time as the brake fluid was replaced.
Since the dimensions etc. are the same as the original, I could replace the bracket and hose without changing anything.
If you want to replace the fluid, it is better to ask PRO.
[Color] I hope it can reduce the ultraviolet ray transmission because it is smoke, but the effect is unknown.
View detail
Fits: Others Brembo 14-19RCSfor Master Cylinder
Design priority is this one.
I chose it only by design, but I am satisfied. There are inconveniences such as the capacity is small and it is necessary to check Oil frequently at the time of maintenance of Caliper, but the design is so excellent that it does not become painful. View detail
The look.
I bought this for Clutch hydraulics and looks.
Performance is the same as a normal Tank.
I'm happy with it
View detail
To DR-Z's RearReserver tankRepair
OEMRearReserver tank of DR-Z400SM is deformed by exhaust pipe heat? It is deformed by heat.
I decided to go with this product, which is cheap and has a nice Size feel, because I couldn't handle the gap between Cap and Tank due to the deformation.
If you use Homosen Bracket to align the tank, you can install it.
You will need to do a Fluid change with it because of the air.
View detail