Reviews
It is good as it is not so far.
Although I was allowed to use conventional products until now, I feel oldness also in appearance,
I found this product at the place I felt the exchange and it came to purchase.
Because it is Smoke Type, will not it prevent deterioration of Brake fluid?.
View detail
It is good as it is not so far.
Until now, the conventional type was used somewhat deteriorated, so I was going to replace it
I found this type with good Timing and purchased it.
It is fresh as it is a Type that has never been before..
View detail
It is good as it is not so far.
The previous Type is weak for ultraviolet rays and so on, but the resin part deteriorates, but this type seems to be Large sturdy.
Because it is Smoke Type, is not it possible to prevent Oil deterioration inside the Tank?
View detail
It is good as it is not so far.
The previous Type is weak for ultraviolet rays and so on, but the resin part deteriorates, but this type seems to be Large sturdy.
Because it is Smoke Type, is not it possible to prevent Oil deterioration inside Tank?
View detail
I will not mistake it
Since the condition attached to the used car was not good due to aged deterioration
Purchase for replacement.
Together with bremboOEMHose and Clip.
Because it is an OEM itself
Easy to exchange, only bleeding on the Lever side, it was a dozens of minutes work.
It looks like it is now
Excellent for COSPA.
View detail
A bit expensive - - -
However, our GSX - R RearTank is mounted on the Reverse side of Seat frame, it is hard to handle Large!
OEMTank who tried to remove it for further exchange, a fine Crack finding it through the light - - -
I decided to think that it was good as I was able to decide to exchange before it broke down.
For the time being, I extended Bracket from Rear Sets' Base Pre Tote which is installing Rear master,
I installed it while adjusting the position.
With this bleed and Fluid exchange, you do not have to fix the Fluid Tank in some way.
It looks a bit better, it's a bit of a little but the impression has changed considerably.
View detail
good
Miss cylinder tank made by Nisshin is White, so I initially thought about winding in the Wrist band, but I knew there was a Smoke Type and purchased immediately.
I also checked for a similar SmokeTank in brembo, but it was surprising that the price was a bit higher than brembo.
In addition, because Hose also exchanged for Mesh hose, surprising Handlebar was tightened and satisfied.
For anything, I think not only Smoke, but also when it comes out various colors, it is white.
View detail
This is H2 style
When Ninja H2 was announced, I noticed that Reserve tank is not necessarily white (Lol)
This product with the same shape as Ninja 1000 can be attached.
I care about the handling of Brake fluid, but easy to install.
However, although degradation of Fluid can be judged by color so far, this may be difficult - - -
View detail
The feeling I saw is nice
For Mother who had become accustomed to the conventional White Resin Cup for 20 years, this Material and color was a shock.
Because it is not elastic compared with conventional Material, weather resistance and Ethylene Glycol (Fluid) It is a place I do not know what the durability against.
Manufacturer will also make things thought if it seems to lack durability.
View detail
A transparent smoke Reserver tank that has never been.
It was 30 years ago that I saw the Reserver tank separately for the first time. The white container of Polypropylene which is the same material as the Radiator's Reserver tank. I felt the beauty in that. Motorcycle called H2 from Kawasaki was released to the world, and Smoke's Reserver tank. I was shocked by the transparent Tank. View detail
It looks tightened
I exchanged Reserve tank at the same time as replacing Brake fluid.
I think that performance is not improved, and it is perfectly looking parts.
Just replacing it will make Parenthesis better.
View detail
Since it is an isomorphic item, it is safe because it can be attached without machining.
After all, I want you to make Smoke more effective.
From the Brown family, the attack of DARK type is good.
However, since Parenthesis is better than milk white color, for the time being, goo.
View detail
Since it is an isomorphic item, it is safe because it can be attached without machining.
I tried impulse and tried to change the full to Active Red.
I think that it looks better, but the price feels - - - I feel like it's too good.
If possible, I wanted a little smoke tank that is closer to Black.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
BremboOEM may be better
Until now I had problems with using Recall Brake master. Overhauled Mr. brembo MASTER Soon after use leakage changed from Hose to Cup to brembo's one. Thereafter no problem. View detail
After all, Smoke
Easy to install. Mediocal OEM
It seems that it is not included unless it is set to Brake fluidColored.
Also buy Brake fluid, air bleed,
Did you want Smoke to be set from the beginning?
View detail
Is beautiful
I use it as Reserver tank of Brake master of accossato.
I used cheap Chinese-made Tank so far, but since Fluid was bleeding or it became cloudy early, I decided to exchange it for something neat.
At first I thought about attaching Kawasaki's OEM Parts Number, but accossato has the same Hose diameter as brembo, so this one is selected.
Make making is fairly solid and it is beautiful. However, the hole for fixation was Large, it was possible to finish with Bolt of M8 at last using Rubber Bush and Spacer which was rolling in the tool box.
Probably because it thinks that the former hole is about 12 mm, ingenuity is necessary for installation.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
The angle of Bracket is perfect for KATANA
It installed at the same time as RCSMaster cylinder. There was not a separate problem in mounting. I was troubled with bremboOEM Product and other company's products, but the texture of Bracket etc etc etc. I respected and selected this place. The angle of Bracket is perfect for KATANA and it is satisfying if it is a little cheaper.
View detail
Refreshing around Handlebar!
I purchased it at the same time as brembo RCSRadial master! I do not enter much amount of Oil, but I wanted to refresh around Handlebar and I am very happy. Cap's bremboMark also makes me feel bad when driving, is Nice ^ _ ^ View detail
Fits: Others Radial clutch master cylinder, Others RCSClutch master cylinder
Fitting is good
As expected it is a special item. Bar handle and Separate handleSpec. You can choose from. For Clutch's 15 ml tank, HoseLine is diagonal, so if you cut Hose diagonally according to it, it fits well. I feel a little expensive, but with few choices and a good look it was one choice.
View detail
Fits: Others
I was always having trouble positioning the oil tank when I was replacing the handle. Though I knew that various manufacturers did have some oil tank brackets for bar handles and separate handles, I didn't use them for I was worried that it might not fit.
I was always having trouble positioning the oil tank when I was replacing the handle. Though I knew that various manufacturers did have some oil tank brackets for bar handles and separate handles, I didn't use them for I was worried that it might not fit. But then, the tank got discolored and the hose got worn out. So I decided to look for something better.
This billet reservoir tank could be directly installed on the master cylinder and didn't need brackets or hose. The tank would not be discolored and my problems were all to be solved.
The installation was easy, because it had pictures on the manual. Still, when inserting the billet tank to the tank hose nipple, I was careful not to break it. If you are not so sure, you better ask an expert to do this job.
One more thing. It doesn't have a inspection window to check the oil level, so you need to examine it periodically. But I'm fully satisfied with its function.
View detail