Reviews
Great Bracket
This bracket will give you the ability to fine tune where your master cylinder ends up. You can bend it slightly in multiple directions, or use if for other purposes. View detail
I think whether the price and texture are also good.
• 【What made you decide the purchase?】 Variation of price and color abundance, Length
• 【How was it actually used?】 Depending on how you bend the coating Is it a film? I thought that it cracked, but it is not worrisome.
• 【Was it difficult to install? (Hard parts case)】 Installation and bending are too easy and there is nothing special to mention ....
• 【Please tell me the point of installation and hang (in the case of Hard parts)】 It is not about hang, but repeated bending should surely break or become brittle. If it is fine adjustment Large Is it sturdy?.
• [Is there anything I was disappointed about?] It is too conspicuous because there are plenty of thickness in the hole through which Bolt passes ....
? [Hope for Manufacturer - Please tell me if you have any improvement points] enough.
• 【Have you compared items?】
• [Others]
View detail
It is as I thought.
I tried installing it and it fell into the state just as I thought. Subtle bend Length If I knew it earlier I could use it elsewhere. Manufacturer is daringly aiming to make it. View detail
Fits: Others , Others
Good Color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Fits: Others
Nice color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Just to see goodness when looking at the hand - - -
Brake Master When changing Cylinder, my Motorcycle has purchased it for Separate handle.
There is also sufficient thickness, making it solid,
Personally I just caught sighting at the middle due to two holes, cheaply cheap (Like you made yourself with Emon) Sorry to get an impression.
View detail
There is a thing only for the car model only
Since it is a used car, there are many parts that deteriorated in many ways,
This part was sometimes included in the eyes while driving, so we aimed to improve the appearance.
Reached Big Li? (◎ o ◎) / The same thing as before!
Until the color (^ ^;
However, it may have been a good choice if we could consider the good results that we used so far.
Although it did not become Large Kima Imechen,
Together with Master cylinder cap of the company around Handlebar became gorgeous.
View detail
Even with other company's Brake master
I used it for Tank installation of OEM's NISSINBrake master.
Since OEMTank was badly positioned and difficult to maintain, it is perfectly relocated and moved in Kore..
Processing to expand the hole was necessary but it looked better as well
View detail
Fits: その他
Used to attach reservoir tank of H2 to the Radon of Flanders
【What made you decide the purchase?】
I felt like I saw it in the photo, because it seemed possible to divert it in Small processing. After that the color was Silver of Aluminum Ground. (Bracket on Clutch side is also Silver Alloy)
【How was it actually used?】
It's as if it were a finish like an OEM Parts Number.
【Was it difficult to install? (Hard parts case)】
Used to attach the Black Brake fluid reservoir tank of Kawasaki H2 to the Radarphone of Flanders. I could install it with simple processing as I expected.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since the Screw hole of the mount on the radiapon side is 10 mm in diameter, according to it, the attachment hole on the Bracket side was expanded to 10 mm with Drill. We adjusted the angle by slightly bending the Bracket so that the Brake fluid tank was horizontal as much as possible.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Please lower the price a little more.
【Have you compared items?】
I also considered Bracket of DAYTONA, POSH and GALE SPEED, but the shapes and colors are not suitable for hope.
View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2
Quantity : 2pc. Purchase eyes
Quantity : 2pc. It is a purchase of eyes eye. Last purchase was for Brake Master but this time I bought this SANCTUARY Sanctuary Master Reserver Tank Bracket for Clutch Master. In order to bend to an arbitrary position, the last time it warmly bent at a stretch, because Black Anodized peeled and discolored, it was bent slightly at a time to position it.
It was successful this time.
View detail
There have been problems can not be fixed tank I can simply have the product fixed position, And I just make plastic hand, reached my request *** , And I just sculpted with my hands to meet my requirements
There have been problems can not be fixed tank I can simply have the product fixed position, And I just make plastic hand, reached my request *** , And I just sculpted with my hands to meet my requirements View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2
Purchase
I exchanged from Nisshin's Tank Bracket. Tank Bracket positioned from the beginning is sold from various places, but Cowl - I bought this product by bothering me with interference with Inner cowl and tried to bend it to an arbitrary position by myself. View detail
Finally I could see it.
MONKEYRear sticking to Normal step with disk formation.
If it is Rear Sets, you can choose from a lot of items, but in Normal step, there are various restrictions, there was no item of your choice in there.
This product can be installed if it is Normal frame regardless of the shape of Clutch cover.
As expected the Drum brake and the different disc brake work well.
It's comfortable without being tired at Normal position to PetitTouring with friends.
View detail
I Bought the G-CRAFT master cylinder mount kit 2 for my brake disc conversion. The quality was great and was fitted perfectly. Since i use Yoshimura cyclone (sidewinder) exuast, the normal rear master cylinder won't fit. G-CRAFT is an highly recommended b
I Bought the G-CRAFT master cylinder mount kit 2 for my brake disc conversion. The quality was great and was fitted perfectly. Since i use Yoshimura cyclone (sidewinder) exuast, the normal rear master cylinder won't fit. G-CRAFT is an highly recommended brand well crafted and design was superb. View detail
It is a good feeling.
Although it was also in the note of Manufacturer, there are possibilities that Wrinkle and Crack will enter if it is too bent. The Clutch side was able to bend it neatly but since the Brake side was twisted + bending at the position of Tank, Wrinkle entered into the painting. * I could install without changing the Hose on the Clutch side but since I changed the Hose on the Brake side, if I exchange the Bracket I will measure the Length and buy Hose and the Tank will be slanted.
View detail
I am satisfied with the high degree of processing freedom of Bracket.
I used it for Brake's separate Tank.
Bracket attached to Nisshin radial was somewhat like Bracket at Home center so I did not like it, so I got lost.
The point of selection is the ease of processing and the color of Gold.
Fix the driver to the vice and insert the driver first to set the mounting hole to 90-degrees.
After that, I attached it to a separate body tank and bent it gently to make it the angle of your choice.
I thought that wrinkles would come in because of Aluminum, but I could bend it beautifully without such a thing.
I do not know what will happen if you bend it suddenly, but I think that if you bend it slowly you can process it quite freely.
Because the price is also cheap, it is recommended for those who can not be satisfied with the included Bracket.
View detail
It was easy to process.
Bending work was also carried out slowly, making it beautiful.
Although it is after processing, Aluminum's unique Wrinkle is also difficult to enter, I am satisfied with Large.
If you are looking for your favorite MASTER position, please try it out!.
View detail
Fits: その他
I just wanted to make it Black, but ...
【What made you decide the purchase?】
I just wanted to match the color, that's it..
Well it's because Black was originally an option.
【How was it actually used?】
Because the former was Silver, it became the same color as the Holder kind and it was tightened.
It looks good..
【Was it difficult to install? (Hard parts case)】
As it is tightening only for Bolt, nothing is difficult if it is a person who can use an on-board tool.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As it is an Anodized product, I think that it is better to be aware of peeling when tightening Bolt.
While writing such a thing, I noticed that I saw a picture and peeled a little bit ... It is a bit sad.
[Is there anything I was disappointed about?]
Cost that took a while to change things other than color ... whether it was changed with my own intention ...
【Hope for Manufacturer - Please let me know if you have any improvement points]
I mass-produce such Small things carefully, so I think that it is Large strange.
Just as I make these kinds of Brackets sometimes, I realize that.
However, it is also true that it is saved if it is a little cheaper because it is listed as Repair Parts.
【Have you compared items?】
There is none.
Dare to say, it is the core Silver for the master Cylinder from the former, so it may be a comparison to want to change it.
[Others]
The color matching of these Small objects is very effective as Small technique.
Just because Cost takes more than expected, I want to be careful not to waste it at Timing to do.
View detail