Reviews
Bracket
The no-frills Bracket. Yes, it's a Bracket. View detail
On the Brake Side
When I changed the master tank on the Brake Side of my separate Master Cylinder from a LargeTank to a Small TypeTank for Clutch, the long master stay for the LargeTank could not hold the Master Cylinder firmly in place, and it moved due to vibration. I decided to buy it because the long Master stay for LargeTank could not be fixed firmly and moved by vibration.
I am satisfied with the balance between the clutch side and the appearance of the clutch.
View detail
Standard!
It is not from DAYTONA Nisshin, but it is used to fix the tank of MASTER.:Aluminum, making it easy to bend. View detail
NISSIN Master Cylinder Tank Bracket
The mounting holes and pitch were perfect for the Tank for Nissin.
The texture is good and I recommend it.
View detail
Fits: Others
safely
I wanted a black one and bought this one.
It's not too bad, but it's not too bad at all.
View detail
Unify with Black
Originally, the bracket that comes with it is Silver and the Handlebar is Black, so I tried to unify it with Black. The condition of Luster is also good. View detail
Fits: その他
Black stands out.
The black color is used to unify the look of this item. The original silver had a floating appearance, so by making it black, it looks tighter and more parenthesis. View detail
Pushing the Hose
Because the Bracket of the separate Tank attachment is long, I bought the thing with a trial, but how to install it? But it could only be mounted at an angle that would force Hose to do it
In the first place, I'm not sure if this is worth 800 yen Unfortunately, it's in storage
View detail
I'm worried the color will fade
The attached bracket is silver and the Handlebar area is unified with black Balance is much better I am very happy with it View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Just to see goodness when looking at the hand - - -
Brake Master When changing Cylinder, my Motorcycle has purchased it for Separate handle.
There is also sufficient thickness, making it solid,
Personally I just caught sighting at the middle due to two holes, cheaply cheap (Like you made yourself with Emon) Sorry to get an impression.
View detail
can not use!
I bought it for "For Separate Handlebars", but I could not use it because the angle was opposite.. I may not have read the explanation neatly, but I need an illustration to adapt to some more shape. By the way I was planning to use it for Separate handle of HURRICANE View detail
Silver Hey shovel as well - - -
I tried to make Silver from Black color of the same product.
The color tone is different from Image and a little cheap impression.
Making is solid and the accuracy of the work is high.
However, depending on circumstances, I think that it may be necessary to bend somewhat when installing, but it is thick and solid, it will be a mischief when bending.
I would like to respond flexibly to bending a bit more. If it is thinner and more resistant to vibrations, etc, will Steel and other materials be good.
View detail
Fits: その他
Used to attach reservoir tank of H2 to the Radon of Flanders
【What made you decide the purchase?】
I felt like I saw it in the photo, because it seemed possible to divert it in Small processing. After that the color was Silver of Aluminum Ground. (Bracket on Clutch side is also Silver Alloy)
【How was it actually used?】
It's as if it were a finish like an OEM Parts Number.
【Was it difficult to install? (Hard parts case)】
Used to attach the Black Brake fluid reservoir tank of Kawasaki H2 to the Radarphone of Flanders. I could install it with simple processing as I expected.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since the Screw hole of the mount on the radiapon side is 10 mm in diameter, according to it, the attachment hole on the Bracket side was expanded to 10 mm with Drill. We adjusted the angle by slightly bending the Bracket so that the Brake fluid tank was horizontal as much as possible.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Please lower the price a little more.
【Have you compared items?】
I also considered Bracket of DAYTONA, POSH and GALE SPEED, but the shapes and colors are not suitable for hope.
View detail
Fits: その他
It is not possible either.....
With ZX-14R ABS bush hanging
I used it for processing ClutchReserver tank
Small I am Repair Parts but I thank you for commercialization
However - - Because the price is too high
It is a little disappointing.
View detail
Fits: その他
I just wanted to make it Black, but ...
【What made you decide the purchase?】
I just wanted to match the color, that's it..
Well it's because Black was originally an option.
【How was it actually used?】
Because the former was Silver, it became the same color as the Holder kind and it was tightened.
It looks good..
【Was it difficult to install? (Hard parts case)】
As it is tightening only for Bolt, nothing is difficult if it is a person who can use an on-board tool.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As it is an Anodized product, I think that it is better to be aware of peeling when tightening Bolt.
While writing such a thing, I noticed that I saw a picture and peeled a little bit ... It is a bit sad.
[Is there anything I was disappointed about?]
Cost that took a while to change things other than color ... whether it was changed with my own intention ...
【Hope for Manufacturer - Please let me know if you have any improvement points]
I mass-produce such Small things carefully, so I think that it is Large strange.
Just as I make these kinds of Brackets sometimes, I realize that.
However, it is also true that it is saved if it is a little cheaper because it is listed as Repair Parts.
【Have you compared items?】
There is none.
Dare to say, it is the core Silver for the master Cylinder from the former, so it may be a comparison to want to change it.
[Others]
The color matching of these Small objects is very effective as Small technique.
Just because Cost takes more than expected, I want to be careful not to waste it at Timing to do.
View detail
Because I did not want to spend the past here alone
【What made you decide the purchase?】
Actually, I had a familiar Bracket of Silver, but I was disliked because it was around MASTER too, so I was disliked ... Because it's so much a sense that colors match.
【How was it actually used?】
Conversely, it can be said that just changing the one you used to the same new one.
So, I do not have much impression, but it looks like the color has become the same and it got tightened and it looks better and it looks better.
【Was it difficult to install? (Hard parts case)】
Since it is a Bracket to the last, only tighten each Bolt.
It is not difficult..
【Please tell me the point of installation and hang (in the case of Hard parts)】
It is a peculiar Black color, so it is sad that even if the color is removed, it is good to temporarily tighten with a finger while fixing the position and tighten the Holder side after the Tank position is decided.
[Is there anything I was disappointed about?]
Although not particularly, Bracket is only Bracket ...
【Hope for Manufacturer - Please let me know if you have any improvement points]
Products of these lines are obliged to be so, but it is appreciated if it is a little cheaper ...
I felt it especially just for making my own work.
【Have you compared items?】
Originally planned to be attached to Mirror Holder, it is not particularly compared with something.
In the first place I also wanted to make the color different though I was using it.
[Others]
It's a good and bad Aluminum bar, Bracket.
I think that you can use anything unless you are particular about OEM.
View detail
Inverse to Image
We are mounting Master Cylinder Cup at Mirror mounting position on our Separate handle.
Because the Handlebar position is H-shaped, CylinderCup tilts considerably in OEMBracket, so we purchased this product without particular investigation from Manufacturer name, conforming Cylinder, product name.
I tried to install it, is that the opposite angle?
In OEM 90-degrees's Bracket, Cup is tilted to Right, so if we replace it, it was expected to be further inclined to Right by about 15 degrees, so it was a good deal.
I think that it would be very useful as a Bracket option if I did not fit and if I had it mounted in a different place.
View detail
Cospa Bracket
I was coloring Master tank's Bracket and I chose it by shape and price. Bolt and Bracket of the Holder part of the Handlebar are rested and installed, but the color around the hole part of Bolt flakes off. For the time being Touch pan after positioning. I think that there is Cost performance and it is good..
View detail