Reviews
I just wish I'd known about it sooner.
Used for maintenance.
When I lift up the rear brake lever with STAND, I have been bending the S-shaped Hook to the Grip and Front brake lever.
I had been installing and fixing it, but I thought it was difficult to do something. But then I found this!
I use it on my ZEPHYR1100 Nisshin radial pump and it is very useful.
View detail
At the time of maintenance.
Useful for keeping the Front wheel locked during servicing.
Quantity because it is only hooked up.:It's very easy to Set.
It is very useful.
View detail
inferior goods
I used to use the Brake Lock from Ariete, but the Rubber part finally broke off, so I had to
I bought this one. It looks exactly the same as the Ariete product, and the usage is also the same, but the part that holds the Rubber of Plastic in its mouth is not well designed, and it comes out when tension is applied, making it useless.
These are so-called Garbage products.
The price is low, but I would recommend not buying this one.
View detail
It could not be used as it was and required processing.
It's a tough grade, but there's a reason.
one. When I tried the delivered product, I found that the joint of Rubber was easily pulled out.
It was useless.
two. If we process it, we can make it usable somehow.
As mentioned above, it is not the large processing, but the degreasing of the joint of the rubber.
I glued it in place, and since my motorcycle has a grip heater, it's a little thicker.
It was a little tight to cover the Grip, so I heated it with a heat gun to widen the diameter.
It can now be used with such processing.
Originally, I thought that if there was a defect like 1., there would be a problem in Large to distribute it as a product.
I had to return it or throw it away as Garbage.................................
I'll give it a 0 for now.
However, the safety and serviceability of the product is unknown because it is processed at our own risk.
I consider it a necessity for Scooters that are not equipped with parking brake.
View detail
Easy and convenient
This is a very useful item for locking the front wheel when the car is stopped, and I use it every time I jack up the rear tire when cleaning the chain. I use this item every time when I clean the chain.:It's very easy to Set. View detail
It does work.
You have to put the rubber ring through the brake lever and then hook it to the handlebar, but if you pull hard enough, the rubber will come off the plastic base. If it is a product that does not come off the pedestal, I think it would make the Rubberber more flexible. It's a shame because it was so easy to use.
If you handle it gently, it is useful enough. I used it to release the air from the Brake.
View detail
It is useful for simple maintenance
Until now, Wheel Cleaning and ChainMaintenance has been done by Move and Car Jack was troublesome
Purchased for use with the DAYTONA Maintenance Roller Stand
Other Manufacturer Material:I thought about Plastic? but it was too narrow and there was no play, so I went with this one
It is easy to make but useful for locking the rear wheel during maintenance
How durable is the connection between the Rubber and the Rubber?
I think it's a little expensive for the way it's made
View detail
Mostly successful
Required when using the Maintenance Stand
You can use STAND without it, but if you can avoid Risk for 600 yen, it's cheap insurance is
You can use it for BrakeMaintenance, so it's a good one to have
View detail
Useful Tool!
For example, during ChainMaintenance
Easy to use when you want to lock the front brake
Useful Tool
There were cheaper ones, but the shape is narrower
I was worried about the Damage on the Grip, so I went with this one
I've used it and it feels like it's hooked up to Grip
I'm glad I chose this one
You can use it without worrying about the grip thickness
View detail
I bought it because it was cheap.
Clearly, anything was fine if Front brake could lock.
It was a tool that was not concerned at all, so I chose it by price.
Usability is also normal.
It stops well.
View detail
Very useful!
Front brakeOil When promoting air bleeding, we bought the India wire and locked the Front brake at the time of replacement, but due to bad usability it was easy to purchase this item.
Through Lever in the Rubber and then hooking the Plastic part on the Hook to the Accelerator grip it is easy to make a full lock of Brake so it was a little touched.
Also, use this product when putting the vehicle on the Rear stand, lock it and brake it STAND, it will rise easily. Because the price is cheap and the goods are solid, we recommend that you have one item.
View detail
Satisfied
Especially without trouble, it fits perfectly with Handlebar of love machine and Brake.
You can safely work with Maintenace Stand.
Since similar products are on sale from various Manufacturers, it may be good to decide according to your favorite color and price.
View detail
Cost performance is the best!
I use it when using Maintenace Stand.
Formerly Neptrene Beltetc. I was using.
And a year ago by Wei Big, "Webike Garage : Brake Lock "and found it immediately.
It was easy to use and it was very handy.
When I looked for another purchase this time, the product of the same shape appeared from the KN project regardless of how it looked.
We are sorry to Big, but color abundant and cheap! (Since it was purchased at Sale, 20% cheaper than Webike Garage. )
Reach and compare the two and feel texture - It was exactly the same shape.
Then you better get cheaper!
When Grip is thick, it is hard to squeeze a little, but it is common to this product.
Although it seems that there are many expensive items in other shapes recently, this feature is definitely recommended for this feature at this price!
View detail
It is impossible if Grip is thick
I use the photo with a V-strom 650 Grip heater.
It is too thin to get caught on the Grip part, so it will not fit unless you press it quite strongly.
Also ADDRESS V125 also has an external Grip heater,
There was not Grip in it too thick because it was too thick.
Grip heater I think that it corresponds almost if it is not equipped car,
I think that there are times when it is not possible to use it when heater wearer and Grip are exchanged for thick one.
I wish I could use a bit thick Grip.
If it is a Grip that can be installed, it will be quite Good.
You can purchase it comfortably because it is also firm and cheap.
When parking on a slope during Touring, etc. there is a sense of security if you are wearing it.
You can rest assured by putting one in a tool box or TouringBack.
There is also a Grip which can not be used though the construction is good ☆ Three.
If you can respond to 5mm thick Grip, it was Large satisfied!
View detail