Reviews
I bought it because it was cheap.
Clearly, anything was fine if Front brake could lock.
It was a tool that was not concerned at all, so I chose it by price.
Usability is also normal.
It stops well.
View detail
Satisfied
This is useful.
Of course, I think that it is a useful item even in case of emergency. Although it is enough even if you use a cord or Rubber etc., such a product is appreciated.
View detail
To accompany STAND-UP.
I bought it along with Rear stand purchase.
It is a simple making, but it did a firm job for me.
The price was also kept low, Quantity : 1pc. If it exists, it will be able to use forever.
View detail
The distance to Lever is a bit short
At the setting position of my Lever Lever was far and I had to grasp it with considerable strength to install and I could not use it. (I'm exchanging Lever for Other Company Product and it is far from the NORMAL state) I think whether it can be used if it is in the position of NORMAL. View detail
It is convenient if there is.
It's a bit of a stuff, but it's very useful.
You can put the Front brake on condition.
To some extent you can adjust the strength with the car Both Sides.
We do not take cheap and light places.
It is recommended for people who maintain their own level to a certain extent.
View detail
Very useful!
Front brakeOil When promoting air bleeding, we bought the India wire and locked the Front brake at the time of replacement, but due to bad usability it was easy to purchase this item.
Through Lever in the Rubber and then hooking the Plastic part on the Hook to the Accelerator grip it is easy to make a full lock of Brake so it was a little touched.
Also, use this product when putting the vehicle on the Rear stand, lock it and brake it STAND, it will rise easily. Because the price is cheap and the goods are solid, we recommend that you have one item.
View detail
Fallen cannibals
【Use?】 Parking with tilt.
【Use?】 Motorcycle when falling over.
【Use?】 During Maintenance.
I think that it is the strongest in Cospa because it is prepared for only this purpose. It is always under Seat. Since KIJIMA 's Grip heater was attached, it became thicker than OEMGrip, so we first installed it on the Grip side, and the Brake side used it while hitting Brake while hanging it.
View detail
Satisfied
Especially without trouble, it fits perfectly with Handlebar of love machine and Brake.
You can safely work with Maintenace Stand.
Since similar products are on sale from various Manufacturers, it may be good to decide according to your favorite color and price.
View detail
It is convenient if it is present.
I am attaching YAMAHAOEM 's Grip heater, but it' s pretty tough when I put it on the Axel side.
I hope it does not strain the Grip heater itself, but I am a little worried.
The other one is also used during mainframe maintenance of the YZF - R3, but this is good with Don Pischa.
View detail
Cost performance is the best!
I use it when using Maintenace Stand.
Formerly Neptrene Beltetc. I was using.
And a year ago by Wei Big, "Webike Garage : Brake Lock "and found it immediately.
It was easy to use and it was very handy.
When I looked for another purchase this time, the product of the same shape appeared from the KN project regardless of how it looked.
We are sorry to Big, but color abundant and cheap! (Since it was purchased at Sale, 20% cheaper than Webike Garage. )
Reach and compare the two and feel texture - It was exactly the same shape.
Then you better get cheaper!
When Grip is thick, it is hard to squeeze a little, but it is common to this product.
Although it seems that there are many expensive items in other shapes recently, this feature is definitely recommended for this feature at this price!
View detail
It was also effective when using MaintenanceRoller with R25!
ChainMaintenance of Motorcycle (Cleaning and lubrication) To purchase MaintenanceRoller separately, when using the MaintenanceRoller to rotate the Rita Wheel, if you use this product to lock the Front brake, the car body will become Quantity : Pair (for Left and Right) Can move steadily the Rear wheel without moving to.
Recommendation ♪
View detail
BW'S125(SEA6J)
I think that it is a very good product.
It is very convenient when stopping on a little slope.
Parts for the new BW 'S 125 are still few, so it was a nice product to be released.
View detail
For Maintenance
Purchase for use during Maintenance.
There were other types, too, but it seems not to be an obstacle Select here.
Since Grip uses something that is a little bigger,
I feel a bit cracked on deterioration and a bit uneasy.
View detail
I could use this Grip
I love the deformed Pro grip 601, so I gave up the product of this hand, but I tried purchasing daringly.
The results were available as you can see.
With this, we can stop it safely even where there is a slope. (I've moved over and have fallen down)
JTrip's Stand for Beginner is now available so I think I should buy it
There are the same on other Manufacturers, but the letters of DAYTONA are producing luxury (LOL)
View detail
To prevent falls
My motorcycle fixes the front wheels to the WheelClamp, keeps the wheel at the back of the rear wheel and keeps it in the storeroom.
Although I feel that the risk of falling at this point is small, just to be sure I buy it in mind.
Surface "DAYTONA" Logo was the deciding factor.
Because Front brake is locked in effect, the sense of security is different.
If this Size, you can also use it when parking on the road.
I got lost with keyed products sold from other companies, but place importance on price, weight, and time-consuming work.
Those who do outdoor storage, I think there is room for a thought.
View detail
It is impossible if Grip is thick
I use the photo with a V-strom 650 Grip heater.
It is too thin to get caught on the Grip part, so it will not fit unless you press it quite strongly.
Also ADDRESS V125 also has an external Grip heater,
There was not Grip in it too thick because it was too thick.
Grip heater I think that it corresponds almost if it is not equipped car,
I think that there are times when it is not possible to use it when heater wearer and Grip are exchanged for thick one.
I wish I could use a bit thick Grip.
If it is a Grip that can be installed, it will be quite Good.
You can purchase it comfortably because it is also firm and cheap.
When parking on a slope during Touring, etc. there is a sense of security if you are wearing it.
You can rest assured by putting one in a tool box or TouringBack.
There is also a Grip which can not be used though the construction is good ☆ Three.
If you can respond to 5mm thick Grip, it was Large satisfied!
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Installation is very easy.
PCX (JF56) I installed the Brake stopper. Installation is very easy, it will not take 5 minutes.
It is convenient something because it does not have to grasp Brake in the traffic lights. I think that it is a good product even with NORMAL.
★ 5 if the price is cheaper a little, but ★ 4 in terms of COSPA.
View detail
Fits: YAMAHA CYGNUS X (SE44J) Japanese specification 1YP, YAMAHA CYGNUS X 02- (SE44J) Japanese specification 1YP
It is convenient to have it
CYGNUSSR (1YP) It attached to.
【What made you decide the purchase?】 Because it was attached to the original moped rice so it was convenient.
【How was it actually used?】 A sense of security at an incline stop location and signal wait increases.
【Was it difficult to install? (Hard parts case)】 It takes time and effort to remove the light cowl and some special screws are used or the nails are hard etc etc. There is, but the work itself is not too difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】 You can stop using Lever's Bolt, but Bolt did not go into Smooth unless you trim a little bit of Body's corner. (Maybe individual difference as it is slight?)
[Is there anything I was disappointed about?] Currently it is unavoidable that this product can only be installed in CYGNUS, but I think that the price is a little high, although it is not a particularly difficult structure.
【Hope for Manufacturer - Please let me know if there are any improvement points】 When thinking about the price, I think that it is better to use a thicker iron plate for better rigidity and Plating use.
【Have you compared items?】 There was nothing to be attached other than this product.
[Others] Because it is slightly different from 2013 and earlier in type, purchase after confirming the model number well when purchasing.
that's all
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Great product even price was abit high for just a simple part. Great for bikes on side stand when parking on the slopes or uneven road surface. Locking the rear brake. Stopping the bike from rolling off. Even when on stop at traffic lights its a good thin
Great product even price was abit high for just a simple part. Great for bikes on side stand when parking on the slopes or uneven road surface. Locking the rear brake. Stopping the bike from rolling off. Even when on stop at traffic lights its a good thing where you can let go of the handle. View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Great good product invented by Adio even the price are too expensive for just this simple product. Great for bikes on side stands when on parking at slopes or uneven surfaces. Preventing the bike from rolling off.
Great good product invented by Adio even the price are too expensive for just this simple product. Great for bikes on side stands when on parking at slopes or uneven surfaces. Preventing the bike from rolling off. View detail