Reviews
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Rust-resistant Material from OEM:Replace with Stainless Steel!
OEM is prone to rust, so we replaced it with this product.
Cap is also included.
Material:I thought about Titanium, but it's too expensive Material:Stainless Steel
Quantity because Front is Double disk.:Buy 3 for 1 Set for 1 Vehicle.
The OEM cap can be removed with a slotted screwdriver.
This is very hard to loosen and almost nappy.
The attached Cap is a Hexagonal Wrench for peace of mind.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
It's good because it lasts a long time and is hard to handle.
[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.
Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.
Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.
How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
High but improved maintainability
[How is it used?
I'm concerned about rust on the pad pins since we are in a salt-affected area.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Durability to be determined, Pad slides well.
[Included Parts:were they on?
None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
The rustproof pin is safe and the cap is Haxe, so it is easier to lick than Minus.
[How is it used?
Rusty Pad pin for replacement
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
It is safe from rust because of salt damage area.
[Included Parts:were they on?
Cap
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
With Pad exchange
When replacing the pad, the pin was replaced with this Stainless Steel.
It is good for rust resistance, but a little expensive.
Unlike the OEM Minus, the Cap part seems to be easy to remove and install.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Stainless Steel
I replaced the OEM because it was rusting. I don't think it will rust, so maintenance will be easier. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Great fit! High quality Stainless
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
OEM has been reduced and replaced.
If you're going to replace it anyway, Material:I made it to Stainless Steel
I like that it comes with a Cap.
In OEM, the cap is a minus screw and the pin is hexagonal, so it is very convenient to be able to use the same tools.
I just wonder if the Cap is too thick, or if it's a little frustrating that the head comes out.
I'm talking about looks (and it's not like it's a spot you'd scrape when you fall over).
I think I will choose this one when replacing other models of cars.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
superior article
I tend to remove the pad spring because I don't like the trivial drag of the Brake, and as a result, it wears well with the OEM pad pin.
Stainless steel is strong and does not wear as much as OEM and prevents rust, so we replace it with the OEM pad every time we replace the OEM pad.
The price seems high when replacing this part with a single body, but by replacing the pad at the same time, the price seems like an error, so it is a recommendation.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
High recommended parts
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged
so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and little add high-temp lube on the surface of pad pin
it's stainless steel but you never know...haha... new pad new pin... they need some time to working well
anyway im so satisfied rear brake now realy smooth works and brakeing like Knife
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Plug cracked.
First, let me say that this is a special case based on a combination of several conditions.
After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening the plug when I heard a cracking sound. I thought the tool was broken, but it was not. As you can see, the wall of the plug had cracked from where it was thinning.
Now, the conditions at the beginning are as follows.
The Plug itself is thinly veiled.
The Plug is a type of car that is only half filled.
Over exertion of force
In other words, it ripped as if it was pushing the unrestrained wall from the outside. After pinching it off with the pliers, I decided to use the NORMAL plug, which fits better, because it was awkward to have the plug sticking out.
The Pad pin itself has no problems at all, with excellent texture and feel.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
It's shiny and cool.
For those who want to upgrade with OEM replacement
It's hard to lick, hard to decay, and also cool.
Recommended for people who ride Honda motorcycles, but be careful with the length.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Resistant to rust
Rust resistant Material:Stainless SteelPad pin。
It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.
Features easy maintenance and performance retention, but hard Material:The surface of the shaft that touches the pad is flattened a little.
It doesn't feel like it's deforming more and more, but it doesn't feel good because I never had this happen with OEM Parts. But OEM parts will rust....
I give it 3 stars because it is rust proof and I haven't had any Trouble.
I think the price is high compared to the quality.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
easy mark
Used for KLX125
Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.
It's just the right length without the excess length that other people have mentioned.
The rest depends on how rusty it is and how fast it wears out.
At any rate, it is worth using this kind of Parts supply because it is very nice!
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Used on D Tracker 125 rear caliper
It's just to keep it from rusting and to see if it will move better. The quality is good, so there is no problem. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Installation of RVF400 NC35 DAYTONA Stainless Steel Pad Pin Set
I installed it on my RVF400 NC35. size is same for rear side, but front side is 1cm longer. (No problem in use) 。 View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Fitted Exactly
I don't know how it feels to use it, but I bought it because I thought it would make maintenance easier without having to worry about Rust.
On my MT07 2016 without ABS, I have no issues at all with installation.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Convenient
I use it on my RearCaliper.
I wasn't looking for firmness, but to use a slotted screwdriver.
I didn't like it, so I replaced it.
Thanks to this, I can use it without worrying about licking it.
View detail