Reviews
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
We should have done this from the beginning.
I used to use a lever with a parking brake, which is a type of brake that you push into the brake lever.
Screws loose and slipping on hills etc....
I had to re-tighten it each time.
And if you tighten it too much, the Stop-lamp stays on.
Lever fades and rattles, and I'm sick and tired of the inferiority of Chinese products.
I reverted to OEM Brake lever.
I found this product on YouTube, purchased it and installed it.
Installation itself is very easy.
The effect is also Outclassing
Why didn't I buy it sooner?
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
The construction is good.
Material:Stainless Steel and well made.
However, I think that about 4,000 yen is appropriate at the highest.
Instruction Manual is also paperless and not included.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
For Scooter, it is a necessity.
Installed on ADV160 。 For Scooter, it's a must-have!
You can take your hands off the wheel without worry when waiting at a traffic light with a gradient.
The release is also good for One-touch! Installation is also super easy.
I used half of the Point this time and am disappointed that the price is a little high.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
Simplified parking brake
This kit is for a parking brake kit with a brake lever that can be inserted into the back mirror.
For parking brakeON, grip the Rear brake lever and insert the Knob.
To release the brake, grasp the rear brake lever again, and the Knob will pop out due to the repulsion of the Spring, and the parking will be released.
I think it is effective for parking on a slope with a Scooter without Shift Pedal.
Motorcycle with GEAR, I would put it in low and park on a slope.
The installation itself is simple:just cover the LeftBack Mirror.
This would be a measure to prevent vehicles from starting and tipping over when parking on a slope,
Please think carefully about the situation and do not force the installation.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
I'm satisfied
You can park with Side Stand without worrying about the slope.
Waiting at traffic lights is also easy.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
Better than I imagined.
With all due respect, I was worried about the price for the apparent brevity of the structure, but after buying it and experiencing the Fit feeling and operability, I was glad to have it at this price.
This is a RECOMMENDATION for those who are struggling!
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
Excellent
Material:Stainless Steel is fine.
Safe parking on slopes.
But … it is expensive … …,
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
The parking brake is still useful.
The CROSSCUB110 had a Lock Function on the front brake, which was convenient, so we installed it on the ADV160.
Although inexpensive Chinese-made products are available, we chose Endurance products for their reliability since they are related to the brake.
Installation is easy, as no adjustment is required, and it is simply tightened together with the Mirror bolt.
Quantity:To set, simply grasp the rear brake lever and press Shaft, and to release, simply grasp the rear brake lever again.
I wish it were less expensive, but I am satisfied with the effect.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
I think it's a good product, although it's been processed a little bit.
In the installation instruction manual, it was written to temporarily fix the unit, adjust it to the position where it can be operated without any snagging, and then tighten the unit, so I installed it accordingly.
Although there may be individual differences, we had no choice but to bend it slightly so that it would not get stuck when tightened.
Other than that, I have no problems at all with the feel of the operation, the effect of Brake, and the release operation, and I think it is a very good product that is easy to use.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
Must-have item for peace of mind
[How is it used?
Used on sloped parking lots and shoulders.
Was the one you received as per Image?
It is rigid and well made, but the price of over 5,000 yen is high. The price of 2,500 yen is appropriate for the product itself. However, it is not so expensive as the price of the product itself, which is about 2,500 yen. I'm just thankful they sell such a niche product." It is acceptable if you think it is.
Was the installation difficult?
Easy
How was your experience with it?
After installation, I tried to operate it several times, but at first it was stuck and could not be released Smoothly. After using it, it started to work Smoothly.
[Was there anything that disappointed you?
None in particular
[Others]
The large Endurance logo is sealed, so it can be peeled off if desired.
Simply hold the Brake and press Pin to lock; hold the Brake one more time to automatically release. Easy to use.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT125, HONDA CT110 HUNTER CUB
I have hang to adjust, but I feel more comfortable stopping on a hill.
CT125 has centrifugal clutch, so when stopping on an uphill, it is not only necessary to put the gear into first gear like a general MTM model, but also to put the gear in by turning the body downwards. If the vehicle is stopped facing up with the center stand, it is also strange to remove the stand when there is a large amount of luggage. In such a case, this is useful.
Scoteretc. has a SIDEBrake-like auxiliary brake depending on the model, so the Image is similar to that.
If you grip the Front brake lever and push the Knob in with your Left hand, the Front is locked, so you can stop the car quite safely.
To release the Knob, lightly grasp the Brake lever, and the Knob will automatically return and release by the force of the Spring.
Although it requires some hang to adjust the position and Mirror at the same time because the Mirror is co-tightened to the Mirror, it can be installed by anyone with Wrench.
I removed the Manufacturer logo Sticker because it was too assertive, but I like it because it blends in like an OEMOption.
View detail