Reviews
It can be used normally
It is safe and normal. It is also normal in terms of price. View detail
At a glance, it looks unreliable, but I use it without problems!
[How is it used?
Since the suspension of CB50s was diverted, the washer of the banjo bolt was replaced together with it during the maintenance of the brake.
How was your experience with it?
The Aluminum Washer does get saggy over time, but the replacement provides peace of mind. Fluid does not leak, and it can be used without any problems.
How did it compare to other products?
At a glance, the quality may seem poor, but I feel safer using it because it is made by POSH rather than a cheap, inferior product.
[Points to note]
Use the product in accordance with the specified Torque. Do not use force.
Since it is a consumable item, it would be easier to replace it at a lower price, but it is a manufacturer's product, so I guess it can't be helped.
View detail
the expendables
I have it as a spare because it needs to be replaced when I need to adjust the brake hose routing, overhaul, etc. View detail
Stable Crash washer
Quantity:1 Set of 100pcs. was not in store stock and was purchased from WeBig!
I can't store it in Large quantity like Motorcycle shop, so I use Active's Quantity.:1 Set of 100pcs. is so-so convenient
It seems to be sold in a limited edition in New color Crash washer!
I think I'm the only one in the world who can afford it.
If there is no resale of the limited time sale, Oidon had to buy it.
I'm getting excited!
View detail
Purchased as a spare for maintenance
Purchased as a spare part when changing the brake hose routing, etc. The washer is the same as the washer included with the purchase of the mesh hose and can be used with confidence. View detail
For Brake Maintenance
When I overhauled my front and rear Calipers, I used the ones I had left over. In the past, I have used Swage line products, but this time, for the first time, I used PMC products.
I compared the rest of the Swage line with the PMC one, and other than the fact that the PMC one is a little thicker, I didn't notice any significant difference in touch or appearance. It doesn't really matter, but this kind of Washer is made of copper and Material.:There are some Aluminum products, but I use Material:I prefer Aluminum.
There was no uncomfortable feeling when the Banjo bolt was tightened, and of course no leakage of brake fluid.
I don't reuse crash washers, so I try to stock them. This time, I used 8 sheets, so I would like to buy them again when they are cheap and stock them.
View detail
Brake Maintenance Stock Parts
I often do not have a CrashWasher on hand when I remove the Hose from the Master or Caliper during brake OH. So I bought this for stock. I've used the same product in the past, so I've already confirmed that the product is in good condition.
Because the material of the Banjo part is Aluminum, the material:Aluminum is selected. I use Copper Type and Aluminum Type depending on the case.
View detail
For Maintenance
The front and rear mesh hose, front brake and clutch are prepped for future maintenance. It is a good choice to stock the brand because of its reliability. View detail
sufficient for one's needs
Used for Caliper's Overhaul.
Ordinary. It's a normal Washer, but you should buy it because you don't have to be stingy with these kinds of supplies around Brake.
1 bagQuantity:1 Set of 2pcs. equals 1pc. of Banjo bolt, you will need to buy the required number of pieces to replace the hose itself.
Also, the price is a bit high, but if you're going to take the brake hose off every day, it won't be a problem if it's just an occasional maintenance.
View detail
BrakeMaintenance
I bought this for Brake Caliper Maintenance and Overhaul.
It works normally
A lower price would have helped.
View detail
I'm doing my job reasonably well.
The one currently in use leaked oil, so I decided that a distortion of the body had occurred because the leak did not stop even though I replaced Seal, so I purchased it for renewal.
The performance of the OEM parts is very different from that of the OEM parts, because the OEM parts did not stop at the high speed corner approach at Izu Skyline. After the change, the same Breaking Point can be used for the approach with no worries.
This product can be installed with confidence because it is crushed during installation by the short parts that support its performance.
View detail
Good stuff
I used it for GORILLA's external Front DiscCaliperHose washer
I used it when I changed the brake fluid and the drain bolt when I changed the engine oil I change the washer once every two times, but when I change the brake fluid, I make sure to do it once every time It's just right for the quantity, because it's an exchange, and the feeling of using it is tightening up It's very comfortable and the Pushing of the Torque wrench's tightening sound is very good It feels good
View detail
I've only used the Swage line
I try to keep some stock on hand because it's something I always replace when I remove the Hose etc I've only used the Swage line, so I don't know if it's good or bad, but I've had problems with it I have never done this before View detail
only this one.
I used it for hydraulic clutch of ZEPHYR 1100. I got to this by saying Aluminum in the place of Aluminum. It's cheap and relieved. Let's change it to a new one. View detail
For Front exchange 7 sheets entered
Front brake hose I want a Washer 7 sheets for exchange and Caliper OH, it is just a good product. I will buy this next time as well. View detail
Attention to millimeter number
It purchased at the same time as Brake hose! It is a non-reusable part and it is an indispensable item at the time of Hose exchange or Banjo bolt exchange as it is at a low price. Because the inner diameter is 10 mm and 11 mm depending on the car model, I think that it is better from checking! View detail
You can choose the thickness
Brake master When changing, I made Washer a brand new item.
Thickness : Since 1 mm and 2 mm thickness can be chosen, it can be used in the best way by choosing between Length of Banjo bolt and Banjo shape.
View detail
Washer
Material : I made it to Fitting of Stainless Steel, so I bought a copper Crash washer. Oil will cause leakage, so be sure to use a new one. View detail
For Aluminum Banjo
In the explanation of the item here, Material supplements it because it was only written with Aluminum.
This Aluminum Washer is used when Banjo bolt is Aluminum Material.
By the way Copper Washer is used for Stainless SteelBanjo bolt.
View detail
[Webike Monitor] Although copper was used until now [ ], in order to arrange a Banjo and a color, it purchased here this time [ ]. appearance is also the touch out of which a sense of togetherness may come. Since two sheets are needed once i
[Webike Monitor] Although copper was used until now [
], in order to arrange a Banjo and a color, it purchased here this time [
].
appearance is also the touch out of which a sense of togetherness may come.
Since two sheets are needed once it removes [
], I think it profitable to enter ten sheet.
quality was also satisfactory.
View detail