Reviews
Replace when retightening Banjo bolt.
[How is it used?
Used to replace the brake master cylinder.
How was your experience with it?
Material:There are aluminum crush washers available, but since this is not a part that is replaced frequently, we used a copper crush washer this time for durability. To be honest, the crash washer does not make any difference, so I have been able to use it without any leakage from the banjo bolt.
Quantity as a spare because I was planning to take the brake hose off and on in the future.:I bought 1 set of 10pcs. but it is still cheap so I think it is good to have a lot of them.
How did it compare to other products?
I have done spec. for other companies' products, but I don't think there is any particular large difference.
[Points to note]
Be careful with Torque when tightening, and if the same Washer is used many times, it will be crushed and not airtight.
View detail
Let's change it when we retighten the banjo bolt.
Product Name
SWAGE-LINE Swage line Crash washer
Item Number
ESP303
Vehicles
GIORCUB (disc. Spec.)
Number of man-hours
About 2 hours
Why did you choose this product?
I bought it this time along with the brake hoses and other products as a result of the disc conversion of the GIORCUB.
I was not particular about Brand, but chose it because it was the most cost-effective product at the time.
Impressions after using it
Especially with regard to the feel of the product, it is just like a regular CrashWasher and maintains a decent airtight seal.
Recently, there are more and more washers that have rubber on the surface of the washer to tighten the airtightness, but I prefer this type of washer because it may blot due to the possibility of rubber or other problems.
Wouldn't CrashWasher be more reliable for old-fashioned people?
▼ Attention
We do not recommend using the same name for the same purpose.
View detail
exchange
BrakeMaintenance:Replaced together with field replacement. Since it is a consumable item, it is replaced periodically.:It's good that they are sold in sets. However, even if there are many of them, the selling price remains the same. View detail
Fender Eliminator Kit
I used it when I replaced Caliper.
No problems at all with use.
Quantity:I bought it for the Set so I could stock it as a spare.
It was good
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
no problem
The outer diameter is a little smaller than Active etc., but there is no problem. View detail
exchange
It should be replaced together with the brake hose replacement.
The unit price per 1pc. is a little more noticeable with …Silver.
View detail
buying up
I bought these last time to replace the brembo brake and caliper, but the number was not enough, so I bought more.
Manufacturer matching, copper color unification, although the color is beautiful.
It's not that expensive, but it's still Quantity:I'd like to see them sold at a discount for about Set10.
View detail
Brake hose replacement
I bought this to replace Brake hose and connect Brembo caliper. I have no problem because it is the same brembo.
The other one stands out in Silver, and I didn't like it, so here Gold (copper) To Type.
Single Item, not Quantity:Set, it would be helpful if they were sold in a few pieces.
View detail
Brembo for Brembo.
I bought it to replace the Caliper.
Probably another Gasket would be no problem, but because it was a replacement for the Brembo caliper Banjo bolt, because it was not an expensive one, I chose the Gasket that Brembo puts out for the Brembo.
View detail
We could use it
The inside diameter is the same, so it seems to work
The following sizes ( ) are Honda OEM Products
Inside diameter:10.0?-(10.0mm)
Outer diameter:14.0?-(14.9?-)
Thickness:1.0? (1.4?)
An unlikely size for a home center
I bought it because the price is less than half the price of the OEM Product
Two cards in one place, 0.8? difference
Crash washer, so the difference will be a little smaller
I'm going to check the position of the holes in the Bolt before using it just to be sure
Large Hand Mail Order Site for even less at 10 per lot, but this one is even cheaper at Quantity:Available from 1pc
View detail
As Stock
Buy this time as Stock this time.
Since Brake around is life-threatening part, it is the part you want to exchange each time without getting kicked.
It was Repeat as I used this Washer before.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Well - - -
I bought it for attaching Cylinder headBypass of GPZ.
Crash washer itself is not very dissatisfied, but the creation of Color is not good and the Oil leakage was bad. We recommend using a combination of liquid Gasket and Seal tape
View detail
Front brakes master exchange
I used it when I exchanged Front brakes master cylinder, but I can not buy it because I can buy it in units of one, quality can be used well without problems. View detail
Attached to DAYTONA 675 08
Since Fluid began to leak from Banjo part of OEM's MASTER, I exchanged it.
The price was also cheap, so it was GOOD as leakage ceased, of course if you exchange it ~
Because I use it with Race, I am afraid that it will be an air breath when I make a full Brake!
View detail
Same Manufacturer
I bought the SWAGE-LINE Easy Order Brake Hose Kit, so Crash washer was also made by PLOT of the same Manufacturer.
Especially, it can be used without problems.
View detail
It is a necessary in the Maintenance of the Clutch relation between a Brake and a part.It will not be assembled if there is nothing. Although five sheets are contained, is there any use by one sheet? I would like you to make the number of entering int
It is a necessary in the Maintenance of the Clutch relation between a Brake and a part.It will not be assembled if there is nothing.
Although five sheets are contained, is there any use by one sheet? I would like you to make the number of entering into even number.Although I regard removal of a Banjo bolt, etc. as a pair of exchange being required, I think that it will be a conscientious company if you think and sell to there although it is a cheap thing, and I am dramatically kind.
View detail
[Webike Monitor] For the Clutch-lever side exchange, using the Washer for Banjo bolts, let's purchase and stop a belt.
[Webike Monitor] For the
Clutch-lever side exchange, using the Washer for Banjo bolts, let's purchase and stop a belt.
View detail
[Webike Monitor] If it was 10 mm in bore in the Washer of the Aluminum, although it was good, it did not sell at the Home center and made into this in it anything that is well searched for since it is not a great price, either, without carrying out.
[Webike Monitor] If it was 10 mm in bore in the Washer of the
Aluminum, although it was good, it did not sell at the Home center and made into this in it anything that is well searched for since it is not a great price, either, without carrying out.
Since it was natural when saying that it was natural, but the function was given sure enough exactly, he has no complaint.
View detail
Since copper becomes blackish by aged deterioration, an Aluminum is a Recommendation when the color of a Banjo is bright. I feel that it is a little expensive.
Since copper becomes blackish by aged deterioration, an Aluminum is a Recommendation when the color of a Banjo is bright. I feel that it is a little expensive. View detail
they are components indispensable to exchange of a brake hose! if it has hoarded -- if compelled -- it sometimes hurries and does!
they are components indispensable to exchange of a brake hose! if it has hoarded -- if compelled -- it sometimes hurries and does! View detail