Reviews
Make it look good.
[How is it used?
Replaced with Titanium to avoid rust
I knew rust is bad for Parenthesis, so I don't like it.
Was the one you received as per Image?
I was a little bit smitten because it was lightweight for its appearance.
Was the installation difficult?
Easy to replace.
However, Torque is unknown.
The original Bolt said it felt like it was when it was removed.
It's about 40 N.m.
But the Manufacturer specified Torque of Titaniumium Bolt is about 24N.m.
Obviously, it's weak.
I was worried about leakage, so I tightened it at 30 N.m.
How was your experience with it?
No change felt.
But now that I've switched to Titanium, I feel good about it.
[Included Parts:were they on?
No. Anti-gouging agent should be applied.
[Was there anything that disappointed you?
Nothing in particular.
[Points to note]
I guess Torque management is the way to go.
I'd like to manage Torque and tighten it up properly and evenly etc. since it's an important part of the Brake.
You are wondering what tools to buy? We recommend Torque wrench from Tonichi!
https://www.webike.net/sd/20672766/
How did it compare to other products?
64Material:Titanium is a taper, so the surface is a little small.
Select made by Zita
I think the look is totally to my liking.
View detail
Fixing Screw
It is used for the Fixing Screw of the Brembo caliper section.
It was not easy to purchase this Size and length to fit, so I was able to buy it nearby.
View detail
For installation of Caliper support for big rotor
Bolt for the following Caliper support.
https://www.webike.net/sd/21346332/
I used the above LINK to Caliper support to convert to Big rotor.
View detail
The pure bolt of R1 was lightweight by the air type. It contributes to a weight saving not a little.
The pure bolt of R1 was lightweight by the air type.
It contributes to a weight saving not a little.
View detail
Fits: DUCATI MONSTER 900 [Monster]., DUCATI MONSTER 900 [Monster] S I.E, DUCATI MONSTER 900 [Monster] Dark, DUCATI MONSTER 900 [Monster]., DUCATI MONSTER 900 [Monster] S I.E, DUCATI MONSTER 900 [Monster] Dark
I don't want to think about costa...
I bought the Titaniumium Bolt for the first time because the OEM one was starting to show rust and corrosion. It is a bad Image because I can't feel the cost effect immediately, but I feel satisfied with it. View detail
Fits: DUCATI StreetFighterV4, DUCATI SUPER BIKE 9916, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SS800, DUCATI SS1000, DUCATI Sport, DUCATI PAUL SMART1000LE, DUCATI PANIGALE V4, DUCATI PanigaleV2, DUCATI Multistrada 1260, DUCATI Multistrada 1200, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 1000, DUCATI Multistrada 1100/S, DUCATI MONSTER796
Weight reduction under the spring (Rear)
The OEM Bolt is cheap and is a replacement.
I can't see it from where I'm standing, but...
View detail
Fits: DUCATI Hypermotard 1000, DUCATI XDiavel, DUCATI StreetFighterV4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200, DUCATI SUPER BIKE 959 Panigale, DUCATI SUPER BIKE 899 Panigale, DUCATI MONSTER 1100, DUCATI MULTISTRADA 1200 DVT, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 796, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI Diavel1260, DUCATI HYPERMOTARD 950, TRIUMPH Supersports Daytona 765, DUCATI Monster Plus, APRILIA SUPER SPORTS RS660
Weight reduction under spring
The OEM Bolt is cheap and is a replacement.
Well, it's a classic.
View detail
Do you find it hard to feel the effects?
【good point】
Lightweight yet strong material:I changed to the Titanium Bolt, so there is some lightening effect.
The Bolt itself is also light, so you can feel that it's getting lighter.
[Bad point]
It's too expensive in any case.
[Summary]
As a product, it's only a few Gram's difference and a self-satisfied product.
If you're looking for a cosmetic product, it's a product that doesn't work to satisfy you in that regard.
View detail
Titanium 64 Bolt for Caliper Mount M10 P1.5
The material of this bolt is very light and hard compared to other bolts. But I'm not satisfied with finishing because some of the surfaces are not smooth View detail
Fits: KAWASAKI Kawasaki cars in general, KAWASAKI Kawasaki cars in general
A little more making.
Weight reduction of Bolt Body? Because of the strength of Bolt itself? The hole is Penetrating in the middle. Although it is the hole that is the key Penetrating hole, the center of the head is fitted, but the thread cutting part is CenterGap. Both 4 gaps, the price is also cheap, so there is no choice?
I do not use this Bolt for Brake relationship, I use it for Rear suspension attached Bolt of MONKEY's Long Swing Arm 16 cm.
1 in the suspension mounting hole of Arm. Attach 25 mm Recoil, install with Bolt of the product, Scoy mountain which jumped out, stop with WNut, Swingarm got to move lightly.
View detail
Is it such a thing?.
I bought it for exchange with BridgeBolt.
I thought that Mount Bolt does not have to be the hex type of Flange but I have purchased it.
Clearly the area hit by Bracket is small.
bremboetc. , There is no budget to buy the Other Company Product, nor do I have to buy !!
Can I change the opinion of the same opinion as myself saying?
The response is so soft I feel scared.
I'd like Titas Washer to be sandwiched between the seats of Bracket and Taper bolt.
View detail
Is it such a thing?
I purchased OEM's Bolt because it is RustRust.
Like everyone says "During Breaking - - I do not know by saying clearly !!
I will not do such a hard braking.
It is also subtle to buy OEM again, Stainless bolt is shrinking with heat - - Why would I have thought
Find this item "If it is this price at 64Titanium" I thought it and purchased it.
I strangled at KTC's Hexagonal, but I feel scared that the response is soft and licking.
Is Titanium such a thing like this?
View detail
Since it was worrisome in the weight of the pure Caliper mount bolt, it was searching.Since a hand did not come out highly, the product made from a Beta titanium was made the product made from TITANIUM64.truly -- a Titanium -- it contributed to the weight
Since it was worrisome in the weight of the pure Caliper mount bolt, it was searching.Since a hand did not come out highly, the product made from a Beta titanium was made the product made from TITANIUM64.truly -- a Titanium -- it contributed to the weight saving of the circumference of a guide peg lightly.a part which it does not desorb frequently since the Support is used now, but is desorbed frequently -- a Taper bolt -- it is not -- the thing of a Straight says -- coming out -- I thought ?. View detail
It was searching to exchange since the Bridge Bolt was anxious by the product made from a STAINLESS STEEL before attaching a Brembo caliper.A Cost performance is also good and it contributed also to the weight saving of the circumference of a guide peg.Si
It was searching to exchange since the Bridge Bolt was anxious by the product made from a STAINLESS STEEL before attaching a Brembo caliper.A Cost performance is also good and it contributed also to the weight saving of the circumference of a guide peg.Since it corresponded to exchange immediately since the Bolt of the Size difference was merely contained, but the exchange day had shifted, the star 3 was used. View detail