Reviews
For GSX1300R HAYABUSA
[How is it used?
This has become necessary along with the replacement of the Caliper on the GSX1300R HAYABUSA.
I don't need OEMCaliper, but this RADIAL CALIPER needs a color.
At first I wasn't sure of the thickness of the color, so I tried different colors.
For SEA BASSOEMFront fork, 15mm is just right, not 18mm.
Was the one you received as per Image?
Image
Compact, good quality.
The price is inexpensive for the solid quality of the product itself, and I think 6,600 yen for four is a bargain.
Four products from other Manufacturers cost more than 10,000 yen.
Was the installation difficult?
It is not difficult because it only needs to be placed between Caliper and Fork.
How was your experience with it?
Exactly.
[Included Parts:were they on?
There is none
Instruction Manual is not required, so you will know it when you see it.
[Was there anything that disappointed you?
I would like to see the compatible Size for each car model listed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I tried various sizes, but I had to buy several sizes and try them one by one by myself because I couldn't find out what millimeter is the most appropriate on the Net. After all, 18mm is too high and 1/3 of Rotor is not pinched.
13mm is too low and Rotor will not be able to turn.
15mm fits perfectly
View detail
To install a 320mm disc on a '21 ZX-6R!
From the first play with the Brakes in 2023 to the Master Cylinder, Brake line, Caliper, and Clutch replacement, it was finished. The only thing left was the disc, and I had a long-sought brembo at the summer We-BigSale.:I purchased a Floating Disc. 310mm OEMDisk size would have been fine with the 9mm PLOTOffset collar I have been using, but I purchased a 320mm…OEMSizeOver, so the Offset collar was also changed.
To select an offset collar, I borrowed an 11mm offset collar from a friend and measured it. However, when I selected 14mm, the measurement result showed that the pad contact surface slightly protruded from the disc. Therefore, we decided that 13mm Offset collar by KOKEN would be the best choice! I decided to go with the 13mm Offset collar by KOKEN. The color of the collar is black, and while PLOT's Offset collar is matte black, Koken's is glossy black. The OEM dwell pin fits perfectly, as expected of made in Japan quality. The only complaint I have is the cushioning material. It is a thin and thin Nylon cushioning material and I don't notice it even if it falls on the floor or table. The only complaint I have is that the thin, dusty Nylon cushioning material is too thin to notice if it falls on the floor or table. (Chuckles)
View detail
OEM 298 from 2021 MT-09SP used to convert to RIOEM320
I purchased this color to replace the OEMΦ298 on my 2021 MT-09SP with the OEMΦ320 on my current R1.
However, Lineup does not have 11mm, and I thought that if the pad was popping out, I could shave the collar and buy a 12mm pad.
The result is that the Rotor perimeter and Pad edge are perfectly aligned without machining.
Perhaps the OEMDisc Rotor has a diagonal chamfer on the outer circumference and the pad end is positioned inside the chamfer, while the R1OEMRotor has no chamfer on the outer circumference, so the difference may be +1mm. (This is just my imagination.)
I had gathered some information on the Net before I made the 320 conversion, but I was unsure because I had heard that some older models had a perfect fit with a 13mm offset, but in our case, a 12mm offset was just right.
If the pad protrudes from the outer circumference of the rotor, when the pad is worn down, if the unworn portion becomes the same as the rotor thickness, the pad cannot be inserted any further into the rotor, so the brake cannot be used. If the collar cannot be adjusted, it is necessary to shave off the protruding part with a grinder or the like to match the outer circumference of the rotor.
View detail
A reassuring brand
I chose Brand, which I trust because it is a suspension product.
I'm happy with the feel of the product and no problems.
I would choose this product for my next replacement.
View detail