Reviews
Fits: HONDA CB1300SF, HONDA CB1300SB, KAWASAKI ZrX1200DAEG
Beautifully made, perfect fit.
I'm really happy with the quality of these parts, they fit perfectly and look beautiful, they really add to the high quality look I was trying to create with Öhlins forks, Dymag carbon wheels and AP Racing calipers, Superb service from WeBike. View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Match CB1100 Fork with Initial ModelABS.
[How is it used?
The normal fork of CB1100 except RS has a caliper pitch of 62mm and 80mm. This item is for CB750 (RC42 ) It corresponds to 80mmPitch as well as etc.
The caliper side is compatible with bremboAxialCaliper 40mm.
Was the one you received as per Image?
The product seems to be Active and is working well with no accuracy or quality issues.
Was the installation difficult?
It is a Bolt On, so it is easy to install. In my case, there was a slight interference between the Caliper and the disc mounting Bolt base of the Wheel, but I was able to get it out by shifting it slightly.
How was your experience with it?
Since the Caliper position is at the top compared to the Fork of the 62mmPitch, it can go without the Hose extension. It also looks more natural.
[Included Parts:were they on?
In addition to the Instruction Manual, Bolt and Shim are included.
[Was there anything that disappointed you?
The quality of the product is not particularly problematic, but the high price is disappointing.
The recent price increase due to price revisions has made it even more expensive.
The same manufacturer's support with a 62mm pitch is often available, but the 80mm pitch one here may be special and is not available at all in the second-hand market.
View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Fits front forks with CB1100 ABS of some years.
[How is it used?
I purchased the Fork/Caliper pitch 80mm/40mm to fit an older CB1100 Fork with ABS.
Was the one you received as per Image?
Quality is as high as the Image.
Was the installation difficult?
Basically Bolt On, but if it has ABS, it is better to install in Shop to make it work properly.
How was your experience with it?
It is well made and feels secure. I think it is indeed Active.
Recently, CHINA products have been distributed, but there are some cases where the products cannot be installed due to insufficient accuracy or defective products.
[Included Parts:were they on?
It comes with Bolt and Shim.
[Was there anything that disappointed you?
None in particular. Satisfaction level is high.
▼ CB750 (RC42) It is the same pitch as the Fork of the STD Disc and fits the diameter of the STD Disc.
View detail
Fits: YAMAHA FZR750R, SUZUKI GSF1200S, SUZUKI GSX1300R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, HONDA CB1300SF, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI GSX-R400R, SUZUKI RGV250Γ, SUZUKI RF900R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GS1200SS, SUZUKI BANDIT400
That's what Active is all about!
I purchased ActiveSupport along with my brembo equipment. I personally like this manufacturer and the quality and price are very attractive. I am very satisfied with the center and the quality of the product. It may be a little expensive, but it is a product that you can be satisfied with once rather than losing money buying a cheap one. View detail
Fits: KAWASAKI ZXR750R, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI ZZR400, KAWASAKI ZZR1100C, KAWASAKI ZZR1100D, KAWASAKI ZX-9R, KAWASAKI GPZ900R
Purchased for installation of Brembo caliper
I bought this product to install Brembo caliper. The texture is good.
RightLeft and backside engraving for installation (Landmarks) It would have been nice if there had been a detailed Instruction Manual that would have helped me understand the installation orientation. I had a little trouble installing it. (Is it just me?)
View detail
Fits: KAWASAKI Z1, KAWASAKI Z2
For Upgrade of Normal caliper
Converted from KawasakiZ1 OEMCaliper support.
Quintessential Over.
Aluminum Cut-out texture is the best finish.
We chose Silver to be One point.
The pad moves smoothly because the pad entry point has been polished. I use this pad with Vesra's Shim pad, and there is no squeal at all.
If you want to use double diskSpec., you will inevitably need two of them, but two Supports will cost 50,000 yen over.
It is a fun part, but it is a very satisfying part.
View detail
V-max 1200 Rear Brembo caliper support
V-max 1200 Rear Brembo caliper support. Perfectly compatible with Brembo 2p calipers. It is also an overlacing product. View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel500, HONDA Rebel250
For REBEL.
WR3 is cheaper, but after reading the impressions, I decided to go with WR3.
I can use it without problems
View detail
Fits: HONDA Rebel 500, HONDA Rebel 300, HONDA Rebel 500, HONDA Rebel 300
For REBEL 250.
OverRACING is expensive, so I bought this one.
The 250 can be installed and used without any problem.
View detail
Excellent Craftsmanship
Took about 1 week to arrive. Compatible with my 2005 Vtec III. Looks and feels great! Highly recommended product with excellent craftsmanship. View detail
Fits: YAMAHA WR250R
Wheel replacement for X
CarRear support needed when replacing WR250r with XWheel to make it MOTARD.
I was able to order OIL and other parts together.
View detail
Complete Diversion
Purchased as a support to put Crab type Brembo on Takekawa's φ27Front fork. From OthersManufacturer, let alone Takekawa. Mukawaφ27for Front ForkCrabCaliper support." One-off is another option, but one-off is quite expensive. The offset to the Fork and Rotor was adjusted by Washer and Shim. The offset to the Fork and Rotor was adjusted by Washer and Shim. View detail
Fits: HONDA CB750 FA (RC04), HONDA CB900 FZ (SC01), HONDA CB750 FZ (RC04)
For brembo installation
Brembo caliper, SUNSTAR 320mm, radipon to strengthen the Brake! View detail
Fits: KAWASAKI Z125 PRO
Crab type Brembo installed
[How is it used?
OEMFront brake not working too well so purchased to replace Caliper
Was the one you received as per Image?
It was perfect.
Was the installation difficult?
I asked the Motorcycle shop to install it without any problems or Trouble.
How was your experience with it?
Caliper can be mounted securely.
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI GSX1300R
ACTIVE rear caliper adapter
Good quality, decent design. Definitely a good option if you want to convert to a Brembo rear caliper. This is an underslung version that fits in the factory location of the Gen 1 so I suggest to choose a caliper with the bleeder at the top that is intended for being mounted under the swingarm. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG
Works as intended
Works well and looks nice on my 03 ZRX1200R. The only problem is you have to source your own hardware (bolts). I would purchase again. View detail
Fits: SUZUKI address V125, SUZUKI address V125
perfectly (suited)
Required for all 200mmRotor installations on OEMCaliper.
The KN planning product was Exactly with good accuracy.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR
Downward is Recommendation!
It is a definite product. Accuracy and workmanship are unquestionable.
The caliper can be installed either up or down, and if it is up, the hose can be used as OEM, so it is not so difficult to install. However, if you are going to install Brembo caliper, it is recommended to install the caliper facing downwards, because it gives a race ish atmosphere and it does not cover the exhaust system, so it has a great stress-up effect. However, the hose needs to be extended with other brand products.
Since we are here, I would like to introduce the Caliper that was installed. Crab caliper 84mm. Mounting Pitch 84mm. The mounting pitch is 84mm. Also, a banjo bolt for Brembo 1mm pitch is required.
Parts required for downward mounting are 800mm hose (Swage line for me), SIDEBend 20 degree Banjo adapter, and Flare nut adapter (convex). And of course DOT4Brake fluid. There is a hang for air venting, and the Caliper must be removed from the Bracket and turned upward to vent the air.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR
No problems at all. Reliable product.
Brake, so I made the work SuKill a PRO class.
The actual difficulty of the work is about medium-low. However, do not do DIY unless you are absolutely confident.
The product is very accurate and everything worked without difficulty with Bolt On, all Bolts that hold the Bracket and Caliper in place are included.
Since we are here, we would also like to show you the Brembo caliper that we installed. Brake CaliperP4 30/40 40mm for Right Side It is. The Point of choice is “40mm Pitch” and “for Right Side”.
The hose can be installed as OEM. However, the banjo bolt requires a special brembo “1mm pitch”.
1L of DOT4-rated Brake fluid is more than enough.
View detail
A necessary addition to adopt the brake caliper upgrade
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, A necessary addition to adopt the brake caliper upgrade. The front caliper support bracket has a simple design with a strong constructed that allows for perfect positioning and alignment of the Brembo caliper.Products to buy together, To complete the brake upgrade the addition of a Brembo 2pot brake caliper to your cart is also necessary.Difficulty of installation, I can say the fitment of the front caliper support bracket for my installation was easy due to the ease of access to the mounting points using the original fasteners and the included fasteners to secure the Brembo caliper.Cost performance and comparison with other products, The pricing of this product is great, you receive apart made from a high quality material and with a high quality finish. Most of the other brands offer higher priced options.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail