Reviews
Good installation
Buy for Φ 220 and make it to Mukawa river Big Floating Disc
I use it in combination.
Because Mukawa's Disk size is Φ 225
Manufacturer Recommended disc It is not a diameter, but it was able to be installed easily.
The radial gap is not consequently Limit
It seems to be good not to scrape Pad.
I replaced Pad with DAYTONAGolden Pad at WaveRotor
I hear a sound in the early stages of braking.
I do not test the Pad included with Caliper so it sounds
It is unknown whether it does not go out.
I was satisfied with COSPA because I did not manufacture one-off
Manufacturer conformity Rotor Because it is not diameter, please be aware of that point..
View detail
Fits: HARLEY-DAVIDSON SPORTSTER XL883, HARLEY-DAVIDSON DYNA FXD, HARLEY-DAVIDSON SPORTSTER XL1200
Impeccable
Purchased for installing Brembo caliper on Harley FXDX.
Because the Bottom case of Caliper and Front fork is Black, I made it to Black with color matching.
For HARLEYCaliper support, there is something more expensive than this product, but unless it is a Brand faith, this product is satisfactory enough.
View detail
Texture is good, I am satisfied
It installed in CB1300SB of 2005 MODEL. The conformity year was 09, but I thought that there was no problem because SF was 03 ~ 09 and ordered it.
Caliper support for Radial matching OEMSuspension was chosen because it was only from AGRAS.
Texture with Aluminum Cut-out - I am satisfied that the accuracy is high, but I think that the price is somewhat high.
View detail
I returned it..
Since the ground plane of Pad and disc is too Gap, the edge of Pad will remain undiminished, so if there is no Maintenance properly there is a possibility that Brake will not work. View detail
Fits: YAMAHA MT-07, YAMAHA FZR1000, YAMAHA YZF-R6, YAMAHA FJR1300A, YAMAHA FZR750, YAMAHA FZS1000, YAMAHA FZS600 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZR1000, YAMAHA YZF600R, YAMAHA YZF-R1, YAMAHA YZF1000R, YAMAHA XJR400R2, YAMAHA T MAX530, YAMAHA FJ1200, YAMAHA XJR400R, YAMAHA XJR1200, YAMAHA V MAX1200, YAMAHA TRX850, YAMAHA TDM900
Results
Caliper support wanted to choose something that is not as conspicuous as possible as Small as possible, but the shape was not a reference as it was from other web models in the web photo. Since color could not be compromised, I chose Active made by Lineup with Black.
As a result,
- Size is Large bigger than the other company's feeling, but it is not so strange
- In combination with Brembo caliper 40 mm, it does not change to Length of Brake hose
- At Banjo angle 20 degrees you can use NORMAL 's Clamp for hose routing
I am satisfied..
View detail
* See the rust area of the brake disc, where the former brake calipers seated full. * The new bracket do not allow that and left 6-7mm untouch!!!
* See the rust area of the brake disc, where the former brake calipers seated full. * The new bracket do not allow that and left 6-7mm untouch!!! View detail
*machining and material are very good. *but the bracket do not allow the brake pads to cover fully, left 6.5mm of pads material non contacting the brake disc - very bad!!! *it is make for a 334-335mm disc?! and not the 220mm factory size. *offset of th
*machining and material are very good. *but the bracket do not allow the brake pads to cover fully, left 6.5mm of pads material non contacting the brake disc - very bad!!! *it is make for a 334-335mm disc?! and not the 220mm factory size. *offset of the brake need to put 2mm shims to center the caliper to the brake disc - bad!!! * UNHAPPY WITH THE PURCHASE AND SEEK THE MANUFACTURER TO SOLVE THE ISSUE OF FITTING TO THE 220MM DISK!!! *SEE PHOTO HOW LITTLE THE CALIPER SIT ON THE DISK!!! View detail
Hi all, This product is of the highest quality and finish, fits perfectly. I would highly recommend this product to anyone.
Hi all, This product is of the highest quality and finish, fits perfectly. I would highly recommend this product to anyone. View detail
Hi all, This product is of the highest quality and finish, fits perfectly. I would highly recommend this product to anyone.
Hi all, This product is of the highest quality and finish, fits perfectly. I would highly recommend this product to anyone. View detail
![Caliper Support For OHLINS Upright Fork [Color Anodized]](https://global.webike-cdn.net/photo/impression/a1/a123b5a4379781653025b37b06f1de42L.jpg)
Fits: YAMAHA ZRX1200
I am very satisfied..
I recently purchased Support for Black Anodized, because I made the Disc Lock to Large Diameter to 320 φ. It looks cool and I am satisfied with both installation accuracy and Anodized Treatment. View detail
If you attach brembo.
I definitely want to add Brembo caliper.
The installation precision was truly GCraft! It was perfectly patchy Pet Tan co with no insanity!
But if you complain about one thing, is the price a little expensive?
There are no complaints if it is about 2000 yen, but is it just as precise as this?
View detail
Can be installed either above or below.
Caliper can be selected from above and below, this time with all the rear diskization unified with SHIFT UP so purchase.
It is good looking and good construction.
Spacer was also included so that we can slightly change the mounting position of Caliper.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja250
Floating disc correspondence is the key player
I bought it for exchange to Brembo caliper.
When ordering with Wa Big, I bought it elsewhere because it is a product that I can not arrange.
There was also a cheaper thing for Standard rotor, but after that we also switched to Floating Disc and wished for full Floating Disc compatibility here.
Shim for center adjustment was also included, but it was unnecessary because the accuracy was good.
Handling Instruction Manual is also polite, it is kindly written and detailed about the processing of Pad when changing Caliper.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI ZZR1100C, KAWASAKI ZZR1100D, KAWASAKI ZZR400, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI GPZ900R, KAWASAKI ZX-9R
Perfectly. Nicely. ZZr1100D
Spec. It is a change.. Previously I was using another Manufacturer 's Silver, but I like Black. There is no mistake in the system. I do not know for loose prevention, but Bolt on the car body side was tight. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX GROM
If you are five speed, you can install Speed ??sensor!
It is installed in Grom 's 181 cc full Custom.
Since Mission is five speeds of Mukawa river, Speed ??sensor is taken out from Rear.
In order to replace the Rear caliper, I searched on the site of Wei Big's site, and as a thing that can install the Speed ??sensor, I decided to Caliper support of the same Takekawa.
Caliper is Beringer 2p, it's a little bit small but Cut-out is wonderful, it is also a part I want to show.
This Megawa's Support is a type with Caliper on the upper side, so the presence of Beringer stands out better than the Type attached to the lower side.
Support making and texture are satisfied with Large at the highest Rank.
Instruction Manual As easy to install as street, feel like running Brake squeal etc etc. Nothing very Smooth and Brake has become effective as well.
I attach it to Screw of each part using Lock tite.
View detail
Fits: HONDA CB1300SF SP, HONDA CB1300ST, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SB
You can also install it with bremboCasting.
CB 1300SB was installed in 2014 model. Casting is impossible in Manufacturer, but if Wheel was GALE SPEED type-R it could be installed. I do not know any other Wheel. Does OEM correspond to Spoke? ABS is also supported.
It will also make desorption of Rear wheel easier.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
Brembo crab caliper for installation
Brembo caliper I bought it for installation.
The product itself is very accurate and complaining.
Pad needs to cut the outer circumference side, but it is more featuring Ring which is overwhelmingly more effective than the OEM's braking system.
I can not recommend amateur's installation because it is dangerous, but it is definitely a very good product.
View detail
I decided by the price
Caliper support for 320 mm disc has some choices, but for the 300 mm Disc of D TRAX X, I could only find this and K & T, so I chose this cheap price.
Although its shape is cool, it has almost no presence as it does not fit in the field of view.
But in combination with OEMCaliper there is no dissatisfaction because only Support will float outstandingly.
Accuracy is also good, more than one year after purchase, but there is not particularly trouble.
Those who are considering disc diversion of D tiger X are recommended because it is somewhat cheaper to buy this and disc separately than those sold in Kit.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
It is a product as expected
【What made you decide the purchase?】
Because it was an indispensable item in mounting bremboCaliper.
【How was it actually used?】
quality - There is no complaint at all with accuracy.
【Was it difficult to install? (Hard parts case)】
Since the Instruction Manual is easy to understand, if you are a person touching the underbody, I think that you can work without difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As mentioned above, since the Instruction Manual is easy to understand, there is no such thing as hang.
However, since Caliper is an important security part, Torque management is better done
I think whether it is good..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of hard parts, no particular.
[Is there anything I was disappointed about?]
Expectation is not Gap, but I actually have it, I have some impressions.
Just like me, "Brembobrembo : RearBrake Caliper P2 34 84mm "When trying to install this product in combination, there is a part that Brake Pads does not contact with disc. (It is Pad pin side)
It's written in Over Racing's Instruction Manual neatly but it is worth noting because it is better to shave off parts that do not touch disc.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I am satisfied with the quality very well, but the price is 3 times as much as the Front, so I was a little puzzled.
In fact, if you look at the hand, it is possible to do it unfortunately, but I feel that it is still a bit expensive.
【Have you compared items?】
AGRAS
[Others]
nothing special.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25
It is a product as expected
【What made you decide the purchase?】
Because it was an indispensable item when wearing bremboCaliper.
【How was it actually used?】
quality - There is no complaint at all with accuracy.
【Was it difficult to install? (Hard parts case)】
Since the Instruction Manual is easy to understand, if you are a person touching the underbody, I think that you can work without difficulty.
【Please tell me the point of installation and hang (in the case of Hard parts)】
As mentioned above, since the Instruction Manual is easy to understand, there is no such thing as hang.
However, since Caliper is an important security part, Torque management is better done
I think whether it is good..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of hard parts, no particular.
[Is there anything I was disappointed about?]
Expectation is not Gap, but I actually have it, I have some impressions.
Although there are personal impressions, if you select Black in color shade, Bolt is Silver, so it will feel a little floating.
Also, since it is a part that supports Caliper, which is an important security part, the Screw stop will inevitably become a relatively high Torque.
Because it is an Anodized processing, scratching will go, so if you do not like it, I think that it should be protected with SiliconWasher etc..
【Hope for Manufacturer - Please let me know if you have any improvement points]
As mentioned above, I think Black product should be attached with Black Bolt.
Bolt is stopped at 4 places so Silver color Bolt asserts too much and it's coolness
I felt like I had killed him..
【Have you compared items?】
AGRAS
Active
[Others]
nothing special.
View detail