Reviews
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
SP TAKEGAWA Rear Caliper Bracket Kit for Honda Monkey 125
About quality and texture - Top quality. Beatuifully machined bracket here from Takegawa, light weight but super strong. About the feeling of use - Caliper mounted up with no issues and the operation of the caliper is perfect due to the well designed and produced bracket. Products to buy together - Takegawa list these parts to completed the rear caliper upgrade, Brembo 2P caliper 20.6951 and brake hose 500mm. Difficulty of installation - I found the install of just the bracket easy as the rear wheel only needs to be removed for access but for the entire upgrade to be completed difficultly level steps up to medium. Cost performance and comparison with other products - I find the rear caliper bracket a little over priced compared to the front bracket but this seems to be common with all brands. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - If you are looking to upgrade the rear caliper due to a lack in stopping power then adds this to your cart along with all the other parts required. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX GROM
If you want a brembo, go for it!
[How is it used?
Installed on GROM JC92.
Was the one you received as per Image?
Yes.
The texture and accuracy was excellent, just like Image.
Was the installation difficult?
When installing
? Rear wheel removal
? Rear brake removal
two points occur.
If you have a Level that can do this work without difficulty, the difficulty level is not too high.
On the other hand, I don't have the confidence to do the work in this area, the tools to do (Rear stand etc.) If you don't have one, it's better to leave it to a specialist shop.
How was your experience with it?
No problem at all
I was able to install my Brembo Caliper with no complaints, good accuracy and good quality.
[Included Parts:were they on?
Yes.
Everything I needed for installation was included.
I've used various manufacturers' rear caliper supports, and the one that came with this product is the most helpful Instruction Manual I've ever seen. (*This is my personal opinion)
I didn't have any trouble at all with the installation because the installation Torque values are well documented.
[Was there anything that disappointed you?
Not for this product.
If I had to guess, I'd say that the Grom is not easy to maintain.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Speed sensor is attached, so this is the best choice.
I bought this to replace the rear caliper with brembo.
When I think only of Caliper support, it has been put on the market from various manufacturers, but in my case, it is necessary to change Speed sensor to Rear side from the reason of changing the number of guns of Sprocket with ABS, and because this was almost the only choice made by Mukawa, Caliper This is the reason why I chose the Caliper support made by Mukawa.
If you have replaced the sensor, you only need this 1pc. bracket, so the appearance is also refreshed.
The accuracy is not a problem at all because it is made by Mukawa of trust, and the core also came out to Beauty.
I have also replaced the Swing Arm with a G-Craft one, but this can be installed without any problems.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX GROM
JC92 can also be used.
It can also be used with JC92.
I'm using it with the new Crab.
It may vary from individual to individual, but I was able to get Center by popping it on.
The original bracket also has a gap between the claws and the Swing Arm.
It would be good to eliminate the rattling with Rubber or Gold stuff.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
We'll see how it goes, but it's working
I wanted to make SCRAMBLERSpec. in the new new Crab, so I used the Up type I was confused between Takegawa and Over It has sensor mounting holes, so I made this one It may be a problem with my mounting method or something from Caliper, Bracket, Rotor etc I don't know if it's just a matter of chemistry, but at first when stopping or applying Brake at low speed, there was a buzzing sound and vibration The Caliper became hot, and when I looked at the Rotor, I saw that the inside of the Rotor was not hit quite right, so I had to change the Pad I'm just checking the cutting process The noise is almost no longer audible, but compared to the Front (Front is the same new Crab) Caliper is a bit hot I'm going to give it a little more of a look Even in such a state, Brake works better than NORMAL
If you don't remove one of the bolts and put the Caliper in parallel with the ground, the air won't come out I think it's a good idea
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX GROM
Caliper link code
Model used: HONDA MSX125 GROM 2017. The rear wheel is changed to brembo 34mm double-piston calipers. It cannot be directly installed on the original car. Therefore, the transfer code must be purchased to link to the original car. The material is aluminum alloy, which is very light! It is suitable for MSX125 rear wheel modification of any brand of 34MM mounting hole pitch pair of two calipers Vehicle model: HONDA MSX125 GROM 2017 The rear wheel is changed to the brembo 34mm double piston caliper. It cannot be installed directly on the original car. Therefore, the transfer code that must be purchased can be linked to the original car. The material is aluminum alloy, which is very light! It is suitable for MSX125 rear wheel modification of any brand 34MM installation hole distance two calipers(translated by Google Translator) View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX GROM
If you are five speed, you can install Speed ??sensor!
It is installed in Grom 's 181 cc full Custom.
Since Mission is five speeds of Mukawa river, Speed ??sensor is taken out from Rear.
In order to replace the Rear caliper, I searched on the site of Wei Big's site, and as a thing that can install the Speed ??sensor, I decided to Caliper support of the same Takekawa.
Caliper is Beringer 2p, it's a little bit small but Cut-out is wonderful, it is also a part I want to show.
This Megawa's Support is a type with Caliper on the upper side, so the presence of Beringer stands out better than the Type attached to the lower side.
Support making and texture are satisfied with Large at the highest Rank.
Instruction Manual As easy to install as street, feel like running Brake squeal etc etc. Nothing very Smooth and Brake has become effective as well.
I attach it to Screw of each part using Lock tite.
View detail