Reviews
Banjo bolt
For a safe motorcycle life, make sure to tighten the bolt securely. View detail
When installing bremboCaliper
Installed when bremboCaliper was installed.
I had the color I wanted and the installation was completed without difficulty.
We will see about durability in the future.
View detail
It cannot be used on the MASTER side!
[How is it used?
Touring, city driving
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult.
How was your experience with it?
It could not be used on the MASTER side.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
I would like you to specify the length.
Other items that would be helpful
important point
Cannot be used on the MASTER side
Opinions and requests to Manufacturer
I need you to specify the length.
View detail
It changed between bolt pitches. It was not noticed, but it became HAME which breaks, masters and buys Linda for fastening forcibly. I thought that what was necessary was just to have purchased the bolt of the smile stainless. (It was obsessed
It changed between bolt pitches.
It was not noticed, but it became HAME which breaks, masters and buys Linda for fastening forcibly.
I thought that what was necessary was just to have purchased the bolt of the smile stainless.
(It was obsessed with appearance.) I think that it is cheap well and they are good goods.
View detail
Satisfied with Banjo bolt as expected
The Pitch of Active's GALE SPEED MASTER was 1.0, so I purchased this product.
I was able to choose Screw Pitch, which was very helpful.
As a Banjo bolt, it is a Standard product with no particular outstanding features.
It would be a good choice to match the coloring of the Brake line or the MASTER.
View detail
Banjo bolt as expected!
It is an ordinary Banjo bolt.
This time I wanted to keep the Caliper surroundings in Black and Silver, so I went with Black for the banjo bolt!
After installation, I'm very pleased, especially since the Fluid isn't leaking out!
View detail
I need an air vent.
If the air is not snapped when the Brake is bleed off, it is air remaining in the Master Cylinder. I tap it lightly, but it does not refreshing. It will eventually bleed out. It would be best to have an air bleeder. Also, the price is too expensive. This time, I used DAYTONA's Brake hose.:2pcHose slightly contact. View detail
Blue
Blue looked beautiful, so we installed this one.
The color of the corners peeled off after a few times of tightening, which is not good.
View detail
color coordination
Brake hose color is replaced to match.
I'm not sure if this is a good idea or not, but it's a good idea. I'm not sure if I can help it.
View detail
exchange
I bought this to install brembo radial brake master cylinder.
I chose Stainless black to match the color of the brake hose, which is black.
It's subtle that the silver packing stands out against the black, but it can't be helped.
View detail
It's angled.
It's not Straight Type. It is angled. It seems to be able to be used when you want to change the handling. View detail
It's a bit expensive
I think the price is a bit high, but I have no special complaints. View detail
Be careful not to overtighten.
The Material is Material, so be careful not to overtighten.
I've done it myself.
I was lucky enough to get it at Single Body.
View detail
GSX400SPECIAL Knife edition has
I bought it later because I replaced it with HURRICANE Mesh hose. I bought the SEA BASS GSX400 thinking it had a pitch of 1.00, but it didn't fit, I used a pitch gauge and the original Banjo bolt had a pitch of 1.25. (^_^;) I regret that I should have bought it after checking it, because it was made of stainless steel and had a good texture. It's a shame because it's made of stainless steel. View detail
Used for HEL's Hose
Since the Brake hose of HEL is used, Banjo bolt of the same brand is selected
The thickness of each brand of Banjo is sometimes slightly different, so it is better to use the same brand for Hose and Banjo. As for the product itself, it is not so bad, because the Banjo and the air-removal nipple are integrated, it can be used for the Brembo caliper in part.
View detail
Aluminum Faction
Although there is also a Stainless Steel one, I am a fan of Aluminum because the possibility of electric corrosion is unpleasant and I don't feel like replacing it regularly if I use Stainless Steel.
InitialCost is cheap and Black is easy to choose, which is an advantage of Aluminum.
I think it's the same for both of us to be careful with Overtorque.
The downside is that the beauty noodle can cause sunburn?
View detail
HELBanjo for HELHose
Since the Brake hose of HEL is used, Banjo bolt of the same brand is selected.
Banjo has a slightly different thickness of each brand, so it is safer to use the same brand for Hose and Banjo.
It is with a nipple for air extraction, which can be used for some models such as the Brembo caliper where the nipple for air extraction is integrated with the Banjo.
View detail
It was more subtle than I expected
The reason for this is that I failed to install it, but I still think the price is too high for this one Bolt I think
It's not a consumable item, so maybe it's cheap when you think about it, but..
View detail
Different people think differently!
I was worried about Stainless Steel as well as last time, but to begin with, the base material of Caliper If you don't want to use a Stainless Steel Bolt because it's Aluminum, you can use I chose the Banjo in Aluminum for its opinion
if you're going to use it for something as expensive as a brembo racing caliper, you're certainly going to have electrical corrosion I understand that it's not pleasant to be afraid of
In the meantime, I'd like to replace it if it starts to lose its color or something
View detail
Pitch mistake!
in installing the brembo MASTER and Caliper, I had to do the whole thing with Hose and I replaced it to match When I took it around according to OEM in a domestic car, the pitch was 1.25 Banjo You have to buy a bolt, so be careful not to buy the wrong one (brembo is 1.00Pitch) View detail