Reviews
A wide variety of products
APRACING's CP 2696 has a 3/8 bolt pitch, which is a small size for Japan.
It is available in a choice of colors and comes with a Crash washer.
View detail
![Banjo Bolt [Titanium]](https://img.webike-cdn.net/catalogue/10800/tba_TS.jpg)
Good accuracy
Even a layman can see the accuracy that is touted as a sales pitch.
Material:I bought the Titanium and was first surprised at how light it was when I picked it up.
You can also feel the point of slipping in when installing it on the Caliper, and of course there is no Gap after it is inserted. The accuracy is excellent.
View detail
Used in CB50S Restore
I used it for my CB50S Restore.
The front brake (Caliper and MASTER) of MAGNA50 is ported.
I bought the Hose as well, as I thought I would need it when replacing it.
It is combined with the DAYTONA High-Spec Line Brake Hose Type D.
It can be used without any particular fluid leaks.
View detail
Used for HEL's Hose
Since the Brake hose of HEL is used, Banjo bolt of the same brand is selected
The thickness of each brand of Banjo is sometimes slightly different, so it is better to use the same brand for Hose and Banjo. As for the product itself, it is not so bad, because the Banjo and the air-removal nipple are integrated, it can be used for the Brembo caliper in part.
View detail
Aluminum Faction
Although there is also a Stainless Steel one, I am a fan of Aluminum because the possibility of electric corrosion is unpleasant and I don't feel like replacing it regularly if I use Stainless Steel.
InitialCost is cheap and Black is easy to choose, which is an advantage of Aluminum.
I think it's the same for both of us to be careful with Overtorque.
The downside is that the beauty noodle can cause sunburn?
View detail
This one is also changed along with the replacement of MASTER.
All of the hoes were replaced as well, along with the OEMMASTER to Brembo master.
Then I thought I should change all the Bolt systems and used this one.
Of course, it's just fit and has no leaks.
There are other colored ones outside of the company, but I think using Parts of the same brand as the related parts is the cheapest way to go.
View detail
HELBanjo for HELHose
Since the Brake hose of HEL is used, Banjo bolt of the same brand is selected.
Banjo has a slightly different thickness of each brand, so it is safer to use the same brand for Hose and Banjo.
It is with a nipple for air extraction, which can be used for some models such as the Brembo caliper where the nipple for air extraction is integrated with the Banjo.
View detail
no doubt
A brembo Banjo bolt on a brembo Caliper... wrong, of course! There is none. The price is low and there's no reason to go out of your way to choose anything else.Aluminum Banjo is important It's impossible for me personally as a part, and Stainless needs to take care of the electrical corrosion etc. Choose a safe and secure product because it's Blake. View detail
good-looking
I bought the Banjo bolt for the Front part the other day and it doesn't look good with just the Front part. I bought a Banjo bolt for the Rear.
I bought one with a different Manufacturer, but the Manufacturer is still If not, the shape is slightly different, and this one was the best shape, so I'm giving it a high rating. I did.
View detail
Satisfied
I bought the Banjo bolt last time and it ruined it in an instant, so I bought it again!
The color and quality is good.
It was easy to install, so it's a total steal.
View detail
Happy!
I was happy with my Banjo bolt at a great price!
It's gold in color, which is unusual and cool looking!
I just screwed up at the end and ruined it..
View detail
Used for the Hose for HEL
Since the Brake hose of HEL is used, Banjo bolt of the same brand is selected
Banjo is sometimes slightly different in each Brand thickness, so Hose and Banjo are the same It is safer to match the Brand The product itself is neither acceptable nor unacceptable; it is made of stainless steel, so I think it is highly corrosive
View detail
It's a stylish Banjo!
i bought it for my brembo rear master cylinder
Very good looking and practical due to the holes in the wiring, and the titanium It's light
It's a bit pricey, but it's a reasonable expectation for the price
It does not come with a washer and must be purchased separately
View detail
It was more subtle than I expected
The reason for this is that I failed to install it, but I still think the price is too high for this one Bolt I think
It's not a consumable item, so maybe it's cheap when you think about it, but..
View detail
Strong and rust resistant material:Stainless Steel
It is used for the old Crab of RearBrake Caliper brembo2 pod Because the affinity with aluminum is not so good, I had put off the introduction for a long time But because the place is covered with water in the undercarriage, I was worried about the iron Banjo with Rust beautifully SledgeCompoundetc. measures and Material:I replaced it with Stainless Steel At present, there is no problem in use, but the rainy season has come, and I think that the realm will be shown from here It is It's not an immediate result, so it's a performance thing, but it definitely looks The Goodridge product, which has a strangely cool screw head shape, is Recommendation View detail
For MONKEYbremboCrab!
I can't use my old NISSIN Brake CaliperBanjo bolt, so I used this one The replacement Caliper is a bremboCrab caliper The device is sturdy and large without any problem View detail
Large satisfied with the color
The blue that came with the oil cooler was also good, but it floats away from the overall color of the vehicle I was looking for a different color
When I looked for it, I didn't find anything other than Blue and Red, surprisingly, when I found this product Tension has gone up
I've got about 500km on it and I don't have any oil blotches and I don't think the accuracy is a problem
This may be a maniacal obsession, but the color of these small parts is not the same as the color of the parts The color around the Oil cooler matches the vehicle Large Satisfied
View detail
To the Brembo crab!
I installed a new Brembo crab caliper with no problems I fastened the masking tape to prevent Wound from sticking to the tool when fastening it Color red is one of my favorite colors View detail
The fact that it comes with a washer is a plus
It's a normal Banjo bolt, with no hassle of ordering the OEM, and the texture is better than the same etc
It also comes with a Washer, which is easy
It will be installed at the same time as the company's Mesh hose
View detail
Only a critical security component
I think it's a part of Parts that can't be compromised... Brake is directly related to safety, so I'm going to need something inexpensive Material in terms of buying peace of mind rather than choosing:I chose the Stainless Steel one View detail