Reviews
Banjo
I also purchased this product to replace the hose. It is very helpful to have the same manufacturer. I am satisfied with this product because I can buy it a little cheaper than other products. View detail
Caliper to brembo
[How is it used?
TZr250R (3XV) I bought this in conjunction with changing my Caliper to a brembo Crab.
There are several banjo bolts available from several manufacturers, but we chose this product made by Active, which we have used several times in the past.
Was the one you received as per Image?
Black has no face white, and other colors are also available. I've added color!" I chose Plating because I didn't want to make a statement like that.
The price is slightly different, but I am quite satisfied with the combination.
Was the installation difficult?
It is easy to assemble, but be careful not to forget to put in the washer.
Also, because it is aluminum, it may leave marks if handled with appropriate tools.
How was your experience with it?
Used with ACPerformance line Brake hose and Brembo crab caliper.
You can't feel the difference with the Banjo bolt, but of course there is no Fluid leakage.
The Plating product was too clean, so the other rusty Bolts stood out. (Lol)
Wiring holes are also available, so you can Wiring if you are concerned.
[Included Parts:were they on?
Two Washers are included as described in the product description.
This is helpful because there is no need to prepare separately.
【Review】
Naturally, it can be used with Brembo caliper without any problem.
The color selection is good, but I am a little concerned about fading due to sun exposure.
View detail
ParallelBolt is handy!
You can choose between Stainless and Aluminum, with Stainless being Silver and Aluminum being the usual Blue.
Lineup that has not changed at all since the days of the ancients.
Yes, it's probably Bolt that doesn't sell at all, I get that.
I understand, but isn't there too little color!
There are so few color line nap that there are blogs complaining about it!
If you don't have it, let's make it!
Dye the color too!
And the bolt in the photo is parallel mount bolt.
The color used is also re-anodized to Black.
Bolt was reAnodized to Black for 500 yen and the color for 50 yen, for a total of 550 yen!
The round-trip shipping was more expensive, though.
View detail
It is kind of nice to have a proper selection of for Brembo.
I purchased and installed this product because I am replacing my Caliper with brembo.
I was assured that I was able to properly select for Brembo when I purchased the product.
The amount of Pitch and Screw-in is unique.
In the future, Banjo and other Material:I would like to replace it with Stainless Steel Black.
As an upfront investment, we chose this product, although it is a bit expensive.
View detail
![Banjo bolt [Campaign eligible products].](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0228/24099162_1_TS.jpg)
bremboBanjo bolt
Used for bremboCasting 4POTCaliper.
As expected from OEM Parts, no problems at all.
Brembo did not show any parts such as oil seals in Aftermarket parts, but Banjo did.
(Oil seal requires a twist to order)
View detail
Used for Separator made by Active
If you use Separator, use this double bolt
Texture is fine.
Quantity when tightening:Care is taken to keep the 2pc Hose in place.
View detail
Tokico6pot
Also available for gpz900r OEMCaliper
I am satisfied with both the quality and the price.
View detail
To change the angle
Takekawa's dry method (Hydro) DAYTONA's Clutch from (Hydro) The angle of the release was changed with the change to the 17RHydroClutch, so the angle was adjusted with Mukawa's Fitting. The 17RHydroClutch from Mukawa is the same as the Slim line, so this fits. View detail
A stainless is reliable too.
A stainless is reliable too. View detail
A stainless is safe too.
A stainless is safe too. View detail
Used for Rear Sam Brake master
Rear master (Gail) It is easy to use because it is used for
Purchased this time with the addition of Sam Brake master.
Air removal is much easier.
View detail
More secure than Aluminum
I purchased this product because I need it for my StainlessCrimpType and Banjo adapter for my Universal hose from Buildaline.
Of course, it is more durable than aluminum and less likely to break over time.
2 Crash washers included are also a great value! (^^)
View detail
Great Brake Bleeder Nipples
Have to say that I am very very happy with the product, these bleeders are beautiful in finish and looks, they work great not to mention the great looks they add to your bike, highly recommended, quick delivery from Webike Japan as well. Steve Brisbane Australia View detail
Brake Bleeders
Great product and very quick delivery from Webike Japan, have used these on my ZX14R Ninga and very happy with the finish of the product and the looks, very simple to use and makes bleeding your brakes a pleasure to do. Very quick delivery to Brisbane Australia, arrived in a couple of days via DHL, very happy and highly recommended. Steve Brisbane Australia View detail
Also in Universal Product
I purchased this clutch cover to install an oil cooler on a Special clutch cover.
I thought about using a universal product, but since the oil cooler is also made by Takegawa, I decided to use this product to unify the two.
The degree of curvature is moderate and I am satisfied with both the quality and fitting.
Although it is slightly more expensive, I am satisfied with the fact that it is made by Mukawa.
However, it would be better if other colors were available.
View detail
Great product
I received these a couple of days ago from a Webike Japan and I must say I am very happy with the quality of the item, they are very well made and I would highly recommend them to anyone who is looking for brake banjo bolts like these,. Just to let anyone know that are thinking of buying these bleeders you can not go wrong with the product, the build quality is great and service and delivery times from Webike Japan are exceptional, I highly recommend this product. Steve Australia View detail
Banjo bolt you can trust.
This is a Banjo bolt from the Swage line.
(Although many people seem to use it without paying much attention to it.) In general, there are two types of Banjo thicknesses, but the Swage line is the so-called EarlsType.
The process for selecting a Banjo bolt is as follows
Swage line or Goodridge?
Aluminum or Stainless Steel?
Is the screw pitch 1.25 or 1.0?
Whether the tightening partner is brembo or not
is an option.
Personally, I prefer the Swage line for brake hose handling, so I'm basically a Swage line guy.
Also, aluminum has a lot of color options and is relatively inexpensive, but it's not strong enough to be used as a bolt, so I'm definitely in the stainless steel camp.
Pitch and length depend on what you are tightening.
So, in my case, if I choose the Banjo bolt in order, I will end up with this product.
In fact, I have used this product many times in the past, and I have never encountered any problems with it.
If I had to pick a Neck, it would be the price.
Many people use aluminum banjo bolts without thinking too much about it, but even though it's an M10, it's only capable of applying a torque of 10N-m or so.:I feel that aluminum is too unreliable as a fastening material.
This is a product that goes against the customist's mindset of being plain and expensive, but considering the importance of using it around the brakes, I strongly recommend using a reliable product like this one.
View detail
Screw Pitch should be checked.
I bought this for my XJR1200's RearBrake master cylinder and thought it was a 1.0 pitch because it was a brembo, but it was a 1.25 pitch. View detail
I'll be able to air it out!
[How is it used?
When I bought it as a used car, the brake fluid was replaced in the vehicle inspection maintenance, but when I applied the rear brake, the fee ring was not good, so I thought that I could do something about it. So I decided to replace it with Air Free Banjo Bolt which can remove air completely.
Was the one you received as per Image?
Exactly as seen in the product photos.
Was the installation difficult?
I took it into the shop and had them install it and do a thorough air bleed.
How was your experience with it?
It is true that the fee ring is improved, and the response when stepping on the pedal is drilled, but the brake braking force itself is probably almost the same.
[Included Parts:were they on?
It comes with one Gasket and one Rubber cap.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Brake fluid is also needed as it needs to be aired out. A quantity of 50ml is enough.
View detail
Required for NisshinHorizontal TypeMASTER
I was having a hard time bleeding the air out of the NisshinHorizontal TypeMaster Cylinder. When I used this Banjo bolt, air bleeding was finished without difficulty. The hose for air bleeding sticks firmly and does not come off easily. View detail