Reviews
A wide variety of products
APRACING's CP 2696 has a 3/8 bolt pitch, which is a small size for Japan.
It is available in a choice of colors and comes with a Crash washer.
View detail
![Banjo Bolt [Titanium]](https://img.webike-cdn.net/catalogue/10800/tba_TS.jpg)
Good accuracy
Even a layman can see the accuracy that is touted as a sales pitch.
Material:I bought the Titanium and was first surprised at how light it was when I picked it up.
You can also feel the point of slipping in when installing it on the Caliper, and of course there is no Gap after it is inserted. The accuracy is excellent.
View detail
Used for the Hose for HEL
Since the Brake hose of HEL is used, Banjo bolt of the same brand is selected
Banjo is sometimes slightly different in each Brand thickness, so Hose and Banjo are the same It is safer to match the Brand The product itself is neither acceptable nor unacceptable; it is made of stainless steel, so I think it is highly corrosive
View detail
It's a stylish Banjo!
i bought it for my brembo rear master cylinder
Very good looking and practical due to the holes in the wiring, and the titanium It's light
It's a bit pricey, but it's a reasonable expectation for the price
It does not come with a washer and must be purchased separately
View detail
For MONKEYbremboCrab!
I can't use my old NISSIN Brake CaliperBanjo bolt, so I used this one The replacement Caliper is a bremboCrab caliper The device is sturdy and large without any problem View detail
Large satisfied with the color
The blue that came with the oil cooler was also good, but it floats away from the overall color of the vehicle I was looking for a different color
When I looked for it, I didn't find anything other than Blue and Red, surprisingly, when I found this product Tension has gone up
I've got about 500km on it and I don't have any oil blotches and I don't think the accuracy is a problem
This may be a maniacal obsession, but the color of these small parts is not the same as the color of the parts The color around the Oil cooler matches the vehicle Large Satisfied
View detail
To the Brembo crab!
I installed a new Brembo crab caliper with no problems I fastened the masking tape to prevent Wound from sticking to the tool when fastening it Color red is one of my favorite colors View detail
OK
I ordered it to replace the mesh hose
It's for a specific Banjo adapter, so it's very short even though it's Double
Beware of buying Hose, Banjo adapter and Banjo bolt from RoseRose is required
I couldn't use it myself
The color and construction are perfectly fine, so it's something you can inquire about before ordering
View detail
It works normally
I bought a cheap TitaniumBanjo bolt (for brembo65?) at Yahoo! Oil leaks when installed
Replace it as a washer,? Torqued in regulation?
I ended up buying it again I should have bought this one from the beginning
View detail
Satisfied
It's an inconspicuous part, but he is very happy with it
I chose Maziora blue as my color
Maziora... Really? But it looks purple and blue depending on the angle of view
It would be great if it was a little less expensive...
View detail
Relax with Stainless Steel
I hope Stainless Steel can be more secure than Aluminum.
But the price is high.
When attaching to brembo's MASTER or Caliper, pay attention to Screw's Pitch.
brembo 1 mm Pitch, Others 1. It is 25mm pitch.
View detail
I think it's good
Purchase to secure Banjo adapter. Although I do not know whether or not it matches Pitch of screws, there is nobody to consult with, so it is the present situation that I only have to try. View detail
Self-satisfying parts
Since Bolt's anodized which I used before was thin with heat, purchase.
Just Material : It is Bolt of Titanium.
I do not understand the goodness of only those who understand. (Self-satisfying parts)
View detail
The Brake line gathers.
I tried it in combination with Active's Stainless banjo, Goodridge's Stainless Steel Hose. Since I bought it with Net, I went with careful selection of parts.
Caliper I tried handling my h type. Aluminumwith Color Banjo gradually faded etc. Spec. Although feeling comes out, there is the texture of Stainless Steel and it becomes very cool when unifying with Hose, Banjo. In addition, it is good that Washer comes with the required number.
View detail
It's always this way, but...
It's always this...the colors. I'm a Red guy...the Hose side is Red and Blue, right? Then the Banjo bolt can't be blue, it's going to be red, blue, blue... if it's red, blue, then the Banjo bolt has to be red, it's not going to be different from each other! But you know, I often go to the motorcycle supply store and they don't have Red Banjo bolts, they're all Blue. Guys, you're wrong, it's not Red, Blue, and Blue, it's Red, Blue, and Red! Also, you know, the price is a little high. The cheap but really cheap ones that seem to be made by Large Riku on Yahoo! or something like that, but the ones with cheaper shades are really cheap. I don't feel like using it because it's too cheap. So, I always end up with this brand, but can't it be a little cheaper? It is easy to remove air from Banjo bolt.
One last point...the rubber cap is not durable...it cracks after a year or so. From the beginning, I change to the Rubber cap of Honda OEM because I know that it breaks. It does not crack.
View detail
It is always this - - -
It is always this - - - There are colors.. I'm a Red faction. Hose side is Red and Blue, then Banjo bolt is not Blue, will it be Red, Blue, Blue. If you come with Red, Blue, Banjo bolt will not be staggered unless you come with Red! But when you go to Motorcycle supplies store often you do not have red Banjo bolt. Only Blue. Everyone is wrong! It's not Red, Blue, Blue, Red, Blue, Red right! Afterwards, the price of a little expensive. It is cheap thought to be made by Large land in Yahoo auction, but the guy who is cheap in color is really cheap. I do not mind using it too cheaply. So, I will always be this Brand, is not it cheap enough?
.
View detail
No problem
Used for MAJESTYS Handlebar side. Because I bought Banjo adapter with Straight Type, I purchased it again for 30 degree type.
Moreover, Crash washer recommends to prepare a spare as it has become necessary to re-attach a few times by tightening condition and angle adjustment other than that.
View detail
Purchased for Brembo
Used in combination of MAJESTYS and brembo. As Material is sometimes referred to as Aluminum, it is a tiny prediction how fast to tighten, so I think that the attached Washer should have a spare. For now the problem is not. View detail
Used on OEMMaster cylinder side of GROM.
Brembo replaced both Front and Rear and replaced Hose.
Banjo bolt attached to Hose is Material : Blue color was attached with Aluminum, but I felt the possibility of getting naught when color was easy to peel off and overloaded Torque changed to Stainless Steel.
Grom OEM Master cylinder is M10 1. 25 so I bought it here. By the way Brembo caliper side is M10 1. It becomes 0. If MASTER also brembo it is the same as Caliper Banjo bolt.
Even if it is tightened again with Spanner, it is unquestionably tightened if it is a Stainless Steel and it is the characteristic of Stainless Steel that it does not rust. It would be best if the color is attached but it is impossible as a material. If color is high, if it is hard it is high Material : TitaniumBanjo bolt.
View detail
Products not elsewhere
Parts for Fitting Brake hose in parallel, for Material at BREMBO Caliper : This product was only Stainless SteelBolt. Although it is for Goodridge for Goodridge, it can also be used for Earls. The installation Instruction Manual is also easy to understand, details on how to combine Fitting parts when using Goodridge made Banjo and Earls Banjo are listed.
I am satisfied with the idea of ??handling the Brake hose.
View detail