Reviews
Banjo bolt with Wiring hole
I purchased this bolt because I am going to change the pitch of the banjo bolt to change to a Brembo caliper.
The surface treatment of Anodized was also well done, and even when Torque was applied with Wrench, there was no color flaking of Anodized and it was finished beautifully.
The hexagonal head has a hole for wiring to prevent loosening and was wired with 0.8mm Stainless Steel Wire.
Circuit runners will also be able to use it with confidence.
View detail
Spec. change to match the hose
Oil cooler hose, changed banjo to make it a little thicker.
I made it thicker because I thought the higher the Oil flow rate, the better it would cool.
Normally, it seems that M6Type is often used, and we replaced it with M8Type in order to reduce losses as much as possible.
Anodized is also Beauty.
And it's cheap. So I ordered it right away.
Furthermore, there was a possibility of purchasing additional items the other day, so I checked the inventory and found that they were no longer carrying the product.
So, since there was no point in waiting for a product that wasn't there, I looked into it.
https://www.webike.net/sd/23865070/
If this is the next purchase in the same size of Silver, is this it? I thought, "If I buy this next time in the same size in Silver, it will be this one.
However, however, it seems that they have resumed handling the product.
Good, good.
View detail
for BremboBanjo
For BREMBO Caliper. brembo has Screw Pitch 1.0, so be careful when you buy it. View detail
Anodized is Beauty, accurate and reliable!
[How is it used?
I purchased this as Overhaul for Repair as I am replacing it with CB50Fork.
Was the one you received as per Image?
As per Image, Anodized is Beauty and high quality but inexpensive, which is helpful.
Was the installation difficult?
It is easy to replace the original banjo, but it requires hang to bleed the air.
How was your experience with it?
It is more secure than the inferior Chinese products that are inexpensive and distributed in Large quantities.
The one we are using now has been working for years with no leaks.
[Included Parts:were they on?
Two Aluminum Gaskets are also included.
[Was there anything that disappointed you?
Not particularly
▼I would like to see the Gold type restored as there used to be a Gold type.
View detail
For Suzumbo
Szumbo is bad.
I bought it because it is difficult to bleed air out of the suzumbo.
View detail
It's done right!
Installed in conjunction with the conversion of the brake master.
I chose Red to match the Red color of the car body.
View detail
Brake Disc conversion!
I bought this product because I decided to disc the Drum brake. The price is reasonable, the color is cool, and it is as expected from Swage line. View detail
It's not what it looks like in the picture.
The photo shows the Cable coming straight out from the Sensor, but the actual product is L-shaped. I am in a hurry so I will use it anyway, but I was deceived because I was looking for a straight product. View detail
Expensive but definitely worth it.
Essential parts for installation of Brembo caliper and Brembo master.
It's a bit expensive, but it's a Brake part, so you have to choose a solid one. for Brembo. Two Gaskets are included.
View detail
problem-solving
I had a problem with the stop-lamp switch for my diverted rear sets that I made myself, but this product solved the problem. View detail
To be efficient
The gsxr is located behind Caliper, so I bought it to move it. View detail
For Brembo master
When replacing the clutch hose on MainMotorcycle's XJR1300C,
Since the clutch master cylinder has been changed to brembo's 19RCS,
The 1.25 Pitch banjo bolt that came with Goodridge was not available.
1.00Pitch.
View detail
I am the one who impremented "for Brembo?
GoodridgeType's thin banjo adapter would not fit under the neck, but EarlsType's banjo adapter may be just right. View detail
For Caliper for cbr1000rrr
Used for Caliper for cbr1000rrr
Buy NISSINCaliper for cbr1000rrr because it is the same as PitchGunGunbrembo
The quality is very good.
View detail
Used on Caliper side
Since you purchased HEL's Brake hose, you can use the Quantity:I bought it as a set
I am buying a banjo bolt with BreedNipple because the Caliper does not have an air vent.
The texture is so good that this alone makes me feel a little more Fashion.
View detail
Banjo related products are also available.
Since I bought the brake hose by order, the banjo bolt was also ordered by quantity.:I bought it in Set.
Failure to use dedicated products can cause Trouble.
View detail
ParallelMount on Caliper for cbr1000rrr
Used for Caliper for cbr1000rrr
Purchased because the Pitch is bremboPitch even though it is made by NISSIN.
RequiredItems for h-typeMount
View detail
person who does the work behind the scenes
Small parts, but they are important safety parts with high precision and can be purchased with peace of mind. It is at times like this that I am glad to live in Japan.
Personally, I'm personally hoping that the standards will be aligned so that the Brake hose and Banjo bolt can be directly connected.
View detail
It cannot be used on the MASTER side!
[How is it used?
Touring, city driving
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult.
How was your experience with it?
It could not be used on the MASTER side.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
I would like you to specify the length.
Other items that would be helpful
important point
Cannot be used on the MASTER side
Opinions and requests to Manufacturer
I need you to specify the length.
View detail
I needed a Long.
Purchased because Long was needed due to installation constraints.
I'm thinking it's a waste of Race ish with Hole, and I'm not sure I'll see it later.
I may replace it with another one at some point.
View detail