Reviews
Replace with Plain transparent Hose
In order to replace the brake fluid, I had a quantity of air bleeder in my possession.:Because the Hose of the Set was the transparent Hose of yellow color, I decided to exchange it for the transparent Hose of Plain. In the meantime, I'm going to buy this product which has a name that seems to be resistant to Brake fluid.
By making the Hose a Plain Transparent Hose, it is easier to see the switch between the old Fluid and the new Fluid, and thanks to that, I no longer consume Waste Fluid. However, it is difficult to tell the difference in the Fluid that has not deteriorated, no matter how much Plain transparent Hose is used. I could see the air the same way.
Texture is airlessQuantity:Compared with the Hose that came with the Set, it is almost the same, and the difference is that the outer diameter is about 1mm thin, so if you want to put the Hose Band between the Air breeder, you need to change the Size. After use, I wash it with water and keep it, but there is no deterioration and discoloration. However, when I become calm, 275 yen seems to have been high for the Hose of 50cm…
View detail
Used for assembly from Frame
I thought it was OEM same etc. workmanship! View detail
Fits: HONDA Shirley 70, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Mighty Ducks (ST90)
Used to make from Frame
I'm satisfied with it because I can install it as well as OEM and it's cost effective. View detail
Fits: KAWASAKI KLX125, SUZUKI RM-Z250, KAWASAKI KLX450R, SUZUKI RM-Z450, KAWASAKI KX450F, KAWASAKI KX85, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KX65, SUZUKI DR-Z400SM, SUZUKI RM85, KAWASAKI KX80/II, SUZUKI RM125, SUZUKI RM250, KAWASAKI KX250F, SUZUKI RMX450Z 10-13, KAWASAKI D Tracker 125
Dress-up.
I replaced the OEMParts because they were deteriorating. View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LEAD125, HONDA MONKEY, HONDA MONKEY, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110 PRO, HONDA CROSS CUB50, HONDA CHALY, HONDA GORILLA, HONDA CROSS CUB, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA Dio110, HONDA Dio110, HONDA CD90
Satisfied
The SUPER CUBC125 has a more advanced finish than the previous CUBSeries.
Beautiful aluminum wheel with machined finish even around the rear wheel, Material:Stainless Steel Exhaust System, Round Finish Chain Pull, etc.
I was dissatisfied with the steel plate cut and welded Brake Arm and the rugged Adjust Nut that did not fit the overall atmosphere.
Since there seems to be no Upgraded Brake Arm that can be used for C125 at present, I changed it by changing the Adjust nut for the time being.
I thought Gold would be gaudy, but when I actually installed it I'm changing the parts. I would like to be able to casually appeal to
I also want Brake Arm, SP Mukawa, please develop new products.
View detail
BUELL conformity
I bought this for my BUELL RRfor Replacement.
It fit without a problem.
View detail
For BUELL XB FR
I bought this for my BUELL XB 6Piston typefor replacement.
It was perfect.
View detail
Bought because of Brake switch failure
This product is different from the description.
In fact, Washer is not included.
The end of the cord is clamped to the terminal.
If it does not fit your Motorcycle, you will need to rewire it.
The make itself is a good one.
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA MAGNA50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA CB400SS, HONDA FTR, HONDA CL400, HONDA Ape50, HONDA Ape100, HONDA Dio110, HONDA PCX, HONDA PCX150, HONDA XL230, HONDA CB223, HONDA MONKEY BAJA, HONDA GORILLA
สินค้าคุณภาพดี รอไม่นาน View detail
as for Repair
I bought this as a for Repair when I did an Overhaul of my Radial mount caliper P4 34 100mm.
Quantity per Piston:Quantity per 1pc. of Brake Pads, i.e. 1 Caliper:It is the Caliper structure that is adopted OEM in S1000RR. I bought it to refresh because I was worried about the wear and tear of the pin when I overhauled. I bought it to refresh because I was worried about the wear of the pin when I overhauled. I think it is the proof of the brand that can be trusted in the point that the repair goods like this are line up in detail. Stop. The most important thing is the durability of this brand. The other thing is the durability of these parts. We will see how many cycles it takes to replace the parts.
View detail
Easy to use length
I bought this for Brake air bleeding.
Previously syringe and Quantity:I bought the one that came in a Set, but the Hose was too short and hard to work with, so I was looking for just the Hose.
The deciding factor in the purchase
I happened to find it when I was looking for Parts around Brake, and I remembered that I was looking for Hose for air vent, so I bought it.
The price was inexpensive. (There may be cheaper ones at Home center if you want a cheaper price...) I bought it along with other products I was buying.
[Impressions of using it]
I was able to use Hose normally. It was just about the right length for me because it was too long to get in the way.
It was easy to use because there was no color on the Hose and there was no fogging.
【Review】
The Hose length was 50cm, not too long or too short, just the right length and easy to use.
The Hose is also transparent, which makes it easy to see the brake fluid, and I recommend it for bleeding brake fluid.
The price is cheap, but it is expensive if you buy a Single Body, so I think it is good to buy it together when you are planning to buy something.
View detail
Installed on NSR250Rear master
It is not so difficult to install. However, in the case of my motorcycle, I also adjusted the stop-lamp switch. The effect is not as good as it should be, but it is very nice to look at. View detail
Quantity:1pc
I bought this to go with my Brake Caliper Overhaul.
The deciding factor in the purchase
It was easy to see the Size in the picture and the Cap is Quantity.:I bought it because it is Set.
I wanted to use a famous manufacturer's product instead of an OEM one for my super Petit Custom.
[Impressions of using it]
First of all, the normal Quantity:Was 1pc.:I was skeptical because some people wrote "1 Set of 2pcs.:2pc. I bought it with the feeling that it would be good if it contained Set.
I think the problem is that it's not clearly stated on the Page of the product...
I used it on my YamahaTZr50R OEMFront caliper.
I was worried because I didn't know if it would stick, but I'm glad I was able to use it.
I was hoping it would improve the appearance, but the Cap bremboLogo is almost invisible! (Lol)
I was planning to use it for rear caliper, but I couldn't use it because the size is different from front caliper.:1 Set of 2pcs. It was.
On the Rear side, I think I'll quit being so adventurous and just buy an OEM Product.
Products compared
I compared with NISSIN, DAYTONA and OEM Bleeder Bolt. I bought this one because the price is cheaper, it comes with Cap and it is a famous manufacturer.
【Review】
The product is solid and seems to be able to be used safely. Also, the Instruction Manual that came with it is huge and has some language written on it! (Lol)
The Cap was a little white if it was a long term stock item, but well, I think it is no problem if I blow Spray and clean it.
Use of non-warranted Caliper products is at your own risk.
View detail
I used it on my BelgardaTZr125RR.
I used it on my Belgarda TZr125RR and was very happy to finally find a part that fits after searching for OEM parts from the manufacturer as they are not available. View detail
Rear Brake Clevis
I bought it because I wanted to wear Blue products. Only Parenthesis feels 。。。。。。。。。。。。。。。。。。。。 (^^) / View detail
Swage line Rubber Bush
When replacing the Stainless Steel Hose, it is best to replace it with this product because the OEMBush is too scant. View detail
Fits: HONDA CB350, HONDA CB400 Fore (air-cooled)
Material:Stainless SteelCaliper piston
Haven't installed it yet, but it's got great texture! View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ125, YAMAHA YZ250
Better thank stock clamps!
The ZETA Brake Line Clamp is better than the stock clamp in many ways. It looks good and fits steel braided brake cables better due to its internal diameter. If you want some bling and functionality then this is the clamp to buy. Fits the stock mud guards too just fine! +Easy to install +Looks really good +Available in many colors +Excellent for steel braided brake cables View detail
Fits: HONDA CB350, HONDA CB400 Fore (air-cooled)
Split PinTune
I replaced the Split Pin on my RustRust with a Stainless Steel one and it looks different! View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
I'm using it on my 2007 wr250x, I installed it to match my ZETA brake pedal for a custom look. It took a little work to get it to fit in the original position, but I am very happy with the Large! View detail