Reviews
Installed on GSX-R1000R
How it was replaced
I have had no problems with the OEM Caliper in terms of braking performance.
During maintenance (air bleed, Caliper cleaning, and pad replacement)
BreederValve is facing inward, making it very difficult to use.
When attaching and detaching, there is little clearance with the Wheel and care is required.
Caliper replacement was done, and no other Caliper was a candidate in terms of gold value.
Regarding Caliper installation
The Caliper itself could be installed as is without using a collar.
In my case, I used a collar to adjust the length of the bolt (5mm) because I was using a with hole bolt, and the angle of the banjo adapter and the length of the hose had to be changed because the position of the banjo bolt changed.
Brake hose and MASTER are also replaced.
MASTER has a 30mm Caliper piston.
I changed from OEM to brembo 17.
I haven't done a test run yet, so I don't know how it feels.
I am satisfied since the main purpose of the project was to improve the maintenance performance ahead of time.
View detail
Nisshin2 Pot Caliper
The product looks and performs very well.
It is also cooler on the outside.
Brake performance is no problem at all for a 125cc motorcycle.
View detail
Brembo p2
Very beautiful looking rear brake caliper. Work well with the setup that i bought together with the caliper. Galespeed rear master cylinder and active brake bracket. Great setup. View detail
Brembo billet axial calipers
Very good quality and shipping was fast. Nice upgrade over stock calipers!!! These have the titanium pistons and hardware. Looking forward to comparing them to the standard brembo billet caliper I'm running on my SP-1 View detail
Used for CHALY.
Used for CHALY
Fashion starts from the feet up, right?
Happy with the look, performance!
Since OEM is Drum, I thought I would start with Brake.
View detail
Brembo p34
Product receive as per described..100% authentic from brembo..best price for the product..only takes 5day from japan to Malaysia View detail
brembo indeed!
As expected from brembo, it works well.
When installing on the rear, the new model Crab type Brembo has a banjo bolt on the front of the logo side, so an angled banjo adapter will cause the hose to face outward, so a straight banjo adapter is required.
View detail
good
Thank you so much for responding with really fast shipping at a low price. I think I will use it next time. I haven't installed it yet, but I'm looking forward to the high quality. It's so good. View detail
the quality is unique
I am very happy to receive my parts other accessories. Thank you for the quality and your delivery is excellent. the quality is unique so far you are my favorites. in parts and quality nobody can beat WEBIKE View detail
Nice and reasonable product
It's delivered on time. This product is very nice and price is reasonable. It's worked perfectly for my bike and I recommend to you. View detail
Type 2 GSX1300R HAYABUSA
I installed it on a 2nd model GSX1300R HAYABUSA, but the Master Cylinder also needs to be changed. View detail
Best Production Caliper ever
Installed on my 2011 GSXR 750, as these calipers were awesome on my Ducati's. No spacers or craziness with machining parts, just change to 60mm bolts, buy the pads of your choiuce and get a 17x18/20 master to go with them. No caliper out there matches these until you bump into the $1200 Brembo Billet GP-RX. View detail
Brembo Moto-Oes
As always having very good feeling to shop at this website. Good quality of the product in here. They provide logistics in reasonable price to go . Hope everbody can have a nice experience to shop there. View detail
BREMBO that you can trust and use
I bought it to change it to Brembo because the caliper felt a little pushed back. There are many colors, but there was no choice because the color that could be purchased right away was the basic gold. But I'm very satisfied. I bought it cheaply because of the sale. View detail
It's a gem!
[How is it used?
Winding、Touring
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Accuracy is absolutely no problem. As expected from brembo.
How was your experience with it?
The Image is a change from Casting, but the Control width is about 5 times wider, and the more you can grip the Image, the stronger you can apply the Brake. The more you can grip the Image, the harder you can apply the brake, and the more you can release the brake, the more controllable it is.
The weight will not be very light, about One Side90Gram.
By the way, MASTER uses Racing radial19Φx18.
Also, I think it would be better to use an external pad holder.
I gave the Piston a rub out before installation, and it clearly moves better than Casting. It was obvious, but I was impressed.
I have mentioned some disappointments, but they are more than made up for by the fact that this is a masterpiece. It is racing parts, so functionality is probably the top priority, but don't look at it as a Japanese product.
[Included Parts:were they on?
It was all there
[Was there anything that disappointed you?
However, I would like to mention a point that may be of concern.
There were marks as if the Seal had been removed and glue remained.
The box was unpacked and stopped again with Tape.
The cutting marks were uneven. We should not expect Nisshin's appearance after all.
I think that the Japanese user is very detailed, so I think that the Japanese user should be more detailed in this area. For example, it would be nice to have a simple instruction manual, such as putting it in a new box and sealing it newly. I had no problem with that.
View detail
Cheap option to upgrade other makes and models
I fitted these to my 2007 cbr600rr they fit 330mm rotors without spacers (calipers require 2.5mm to be machined off mounts) considering the 100m stylema's are over 700usd it makes these a bang for your buck upgrade :) View detail
brembo Crab caliper BrakePiston34mm
Purchased Rearbrembo Caliper support for SDR200 to use on RZ250R.
I have only tried to match them and will make an imprement later.
View detail
TZr250R (3XV) Brembo caliperization of
[How is it used?
TZr250R (3XV) The RearBrake Caliper of the "RearBrake Caliper" was in need of an overhaul, so we decided to customize it by the way, so we converted it to brembo.
(Price-wise) I was thinking of getting the WhiteLogo one, but due to the long delivery time, I chose this RedLogo one that was in stock.
Was the one you received as per Image?
I was surprised to find that the package had been opened once and repackaged, but it seems that Webike unpacks and inspects the package.
There was no problem with the product itself and the padc. was already installed.
Was the installation difficult?
For TZr250R, Caliper support is required separately.
As far as I know, there are no new ones available from any Manufacturer, so I bought one that was sold at a certain Oak Auction.
MASTER is YamahaOEMbrembo (Commonly known as Yamaha Brembo) So, the Banjo bolt is changed to ACPerformance line's Universal Hose because the Hose length changes for the Active and Caliper support.
Installation is not difficult if you know what you are doing, since all you have to do is install each one and bleed the air out of the Brake fluid.
How was your experience with it?
Piston diameter is 34mm, but the Stroke to Full Brake is much shorter than OEM.
I think it is good for racing, but I would be a bit cautious about using it on public roads.
However, I am personally satisfied with how Brake works and Touch.
I thought about using a hydraulic brake switch for the short stroke, but there is no space to install it, so I am still thinking about it.
[Included Parts:were they on?
Brake Pad setc. It arrives with the brake pad setc. built in.
Banjo boltetc. is not available and must be prepared separately.
[Was there anything that disappointed you?
There is a price difference of several thousand yen for the Logo color, so to say that was a bit of a disappointment would be an understatement.
I was able to buy the Cool one, so that's good! I was able to buy the Cool one.
【Review】
I have no complaints about the performance of Brake Caliper.
It's a pearl in the pig's eye, since it's only used for touring on public roads!
I am satisfied if I think that I was able to customize it with the difference in price since it cost about 10,000 yen even if I overhauled the OEM Brake Caliper anyway.
View detail
Good
Very good View detail
MinimotoSize's Caliper
I installed this caliper on my 8inch GORILLA to change the front brake to disc. The wheel installed was old 8inchKITACOWheel, so it interfered with the front brake. Braking power changed drastically. It was a little difficult to bleed air from the brake fluid. View detail