Reviews
![TRAD Type1[Trad type1]Front disk rotor](https://img.webike-cdn.net/catalogue/images/100295/T-21HZ_1_TS.jpg)
Fits: KAWASAKI 900 Super Four, KAWASAKI 900 Super Four, KAWASAKI 900 Super Four, KAWASAKI 900 Super Four, KAWASAKI 750SS MACH IV, KAWASAKI 750SS MACH IV, KAWASAKI 750SS MACH IV, KAWASAKI 750RS, KAWASAKI 750SS MACH IV, KAWASAKI 750RS, KAWASAKI 750RS, KAWASAKI 650RS
To Refresh Disc Rotor
I purchased this for use with my Kawasaki Z1.
I purchased this disc with HoleType because the OEMDisc Rotor was approaching its wear limit and I wanted a custom look.
When we removed the STD Disc for replacement, we found the difference in weight between the STD Disc and the Hadrill.
Along with braking power, we expect the weight difference will also change the driving experience.
Rotor replacement is not a difficult task if done carefully.
The bolt hole where the rotor bolt was removed was lightly cleaned with M8 fine tap, Locktite Blue was applied to the bolt, and the bolt was fastened at 26 N.m.
Pad should also be replaced with a new one.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Diversion to ZX25R
The SUNSTAR set for ZX25R is the same diameter and thickness, but not enough, so it was diverted.
Not compatible, but can be installed only by using Spacer collar (5mm).
The 310Φ4.5mm→320Φ5.0mm change increases the weight to 1300g→1430g.
I had hoped that the weight of the inner housing would be reduced to aluminum, but the weight has increased by about 130g.
If you want to use it all the way to the edge, you need to adjust it with Shimetc.
The texture is much better, but Fee Ring did not feel any difference on about public roads.
View detail
Fits: SUZUKI BANDIT600, SUZUKI GSF1200 S, SUZUKI GSF1200 S, SUZUKI GSF1200 S, SUZUKI BANDIT600, SUZUKI GS1200SS, SUZUKI GS1200SS, SUZUKI BANDIT600, SUZUKI BANDIT600, SUZUKI BANDIT600, SUZUKI BANDIT600, SUZUKI GS1200SS, SUZUKI GSF1200 S, SUZUKI BANDIT600 S, SUZUKI BANDIT600 S, SUZUKI BANDIT600 S, SUZUKI BANDIT600 S, SUZUKI BANDIT1200, SUZUKI BANDIT600 S, SUZUKI BANDIT1200
RearBrakes custom
Replaced in conjunction with the Front brake.
It's a shame that it's not very visible in the shadow of the CaliperBracket and Swing Arm, but I like it very much.
BrakeTouch is also easier to control than the OEM without being abrupt.
View detail
Not enough for use in Circuit
I replaced it with Gicu Ceramic sintered at the same time and used it on Circuit, and Judder appeared at full break in about 5 minutes after break in.
I don't know if it was incompatible with the Pad, but I was too scared to hold the Brake.
Then I switched to OEMPad and it was almost a non-issue.
However, since the thickness is 4mm, we decided to replace it with a 5.5mm one, considering the future endurance race and other factors.
View detail
Great!
I haven't run the car since I replaced it, but it has been good so far, so I assume this one will be good too!
If I had to say something, I would have liked a choice of thickness.
If we could make it 0.5mm or 1mm thicker.
View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
I had a hard time removing the OEM.
The product is good, I wanted the Rear brake to work a little better and it worked.
However, there were many places on the YAMAHA chassis where the Torque was higher than the Service Manual, and it was very strange to loosen the Torque here too. I tried to take the wheel to YSP, but I was able to loosen it by warming it up with a burner and buying a proper tool. The screw ruined 1 pc. I wish I had at least used a hex. It was not an easy part to replace at home.
View detail
Fits: YAMAHA TZR250 SP, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250RS, YAMAHA TZR250RS, YAMAHA TZR250RS, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR
Exchange*.
I replaced the Front and I installed the Rear as well. View detail
The fact that you can only choose the color Red is fatal, isn't it?
For MC51 CBR250RR, the only color choice for inner rotor is Red. I was told by a staff member at SUNSTAR that there was a color custom order in the past, but they do not do it now.
My body was White and Blue, so a Reddish Rotor is out of the question. But SUNSTAR is the best design. What should I do? I decided to have it anodized by Koken, or paint it to match the wheel collars, the latter was my choice.
The new Rotor was disassembled and painted by having the plate Gold craftsman tone the color to match the color of the Wheel. The result was just like the Image, so I am Large satisfied.
View detail
Fits: SUZUKI GSX1000S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX1100S KATANA
Front brake replacement
I don't know if it is a characteristic of the car model or not, but I don't think there is anything wrong with it. I don't know about the fine fee rings, etc. Anyway, Parenthesis is very good for self-satisfaction. View detail
Fits: DUCATI 888 SP5, DUCATI 888 SP4, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 SP3, DUCATI 851 SP1, DUCATI 851 SP2, DUCATI 888 SPS, DUCATI 888 STRADA, DUCATI 750SPORT, DUCATI 750SPORT, DUCATI 620 SPORT, DUCATI 620 SPORT, DUCATI 600SS, DUCATI 600SS, DUCATI 600SS, DUCATI 600SS
Controlability
Before the replacement, there was rust on the surface (especially on the back side), and it did not work comfortably when I stepped on it, and there was a strange noise, but after the replacement, the noise disappeared and it works well and is easy to control. View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR, KAWASAKI ZEPHYR, KAWASAKI ZEPHYR, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400
Looks great.
[How is it used?
City driving and occasional touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
The installation was Brake related, so I had it installed at a Motorcycle shop.
How was your experience with it?
Just installed, so we're just getting started.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX750S Sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword, SUZUKI GSX1100S sword
KATANAFront brake replacement
I bought all of these at the end of the year, so I had to install them at the beginning of the year. This is before mounting, but here are my impressions of how it was purchased and how it looks.
I contacted Mr. Webig and the manufacturer, but they said that the Bracket was incompatible with their products. Large sturdy. Thickness 5.5 is Overspecifications for city driving". So I bought this one. I took the time to choose it and it looks perfect and cool. I will post again when I install it.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI Ninja250SL, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja250, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja250
Ly (dynasty of China, approx. 317-186 BCE)
I'm in Rear, so I don't expect much. View detail
Fits: YAMAHA TZR250RS, YAMAHA TZR250RS, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250RS, YAMAHA RZ250R, YAMAHA TZR250, YAMAHA TZR250 SP, YAMAHA TZR250R, YAMAHA R1-Z, YAMAHA R1-Z
SUNSTARBrake Disc
The front brake caliper was replaced with brembo, and the brake disc was replaced with SUNSTAR.
When removing the disc, the bolt is hard and has a screw lock, so be careful not to lick the bolt head.
The Bolt that was removed may be distorted and should be replaced with a new one.
I changed the disc and tried it on Touring and the Touch is better than the OEM disc.
We found the performance of the Other Brand Product disc to be excellent.
View detail
Fits: YAMAHA TZR250RS, YAMAHA TZR250RS, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250RS, YAMAHA RZ250R, YAMAHA TZR250, YAMAHA TZR250 SP, YAMAHA TZR250R, YAMAHA R1-Z, YAMAHA R1-Z
Front Disc Replacement
The front brake was replaced with a brembo Caliper, so I replaced it with SUNSTAR Brake Pads.
The disc bolt has a screw lock, so be careful not to lick the bolt head when removing the disc.
The removed Bolt may be distorted and should be replaced with a new one.
The new Bolt is also installed with screw lock as per the service manual.
I went Touring after the replacement and BrakeTouch is better than OEMdisc.
I feel that Other Brand Product's disc is different.
View detail
Fits: HONDA DAX125, HONDA GROM, HONDA MONKEY125 ABS, HONDA MONKEY125, HONDA SUPER CUB C125
Good goods
Even OEM Caliper will work well.
This should be changed.
I am glad I changed it.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA TRACER900 GT, YAMAHA TRACER900 GT, YAMAHA XSR900
Installed on a 2021 MT-09SP
I was not dissatisfied with the performance of the OEM disc, but I installed the Made in Sunstar Rear Disc Rotor on the MT-09SP, which was model changed to 2021, in conjunction with the replacement of the rear caliper.
Although there is no information on WEBIKE's sales page regarding compatibility after 2021 model year, SUNSTARWEBPage lists up to 2022 model year, and the OEMParts List is also compatible with past models due to common parts.
When installed, the inner side of the OEMdisc is cut out when stacked on top of the OEMdisc, which is expected to reduce weight compared to the OEMdisc.
The actual disc weight was measured and the OEM disc weighed 1039g and the SunStar disc weighed 948g, resulting in a weight reduction of 91g.
The Brake effect seems to increase from the Pattern of the disc, but even the OEM is too effective and I was worried because I wanted to drop the disc.
However, since we replaced the Rear caliper with Other Brand Product this time, it was unclear where the pad contact surface would be located. We decided to replace the disc as well.
By the way, as a result, I wondered if I could have just replaced the Caliper+Support for now, since the contact surface of the Pad is about 1mm outside of the OEM in the case of the Caliper support+New Crab made by OVER.
In addition, as detailed in the Imprements for each Parts, the above combination made the total weight about 400g lighter.
View detail
Fits: HONDA CB400SB, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC Revo, HONDA AFRICA TWIN, HONDA AFRICA TWIN, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400 FOUR, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
SUNSTARPremiumRacing disk rotor Hall Slit Type
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
I also bought Front and Front together, so the front and back together are a great parenthesis!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking force has increased Control.
[Included Parts:were they on?
Only Body was in the bag.
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR F, HONDA VTR F, HONDA VTR F, HONDA VFR750F, HONDA VFR750F, HONDA VTR F, HONDA VTR F, HONDA VFR750F, HONDA VFR750F, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA RVF, HONDA RVF, HONDA RVF, HONDA HORNET, HONDA HORNET
SUNSTARPremiumRacing disk rotor for cb400sf
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking power has increased considerably.
[Included Parts:were they on?
Included Parts:is only 2 brochures
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
I feel that Brake Pads wear out faster because of the slit for ejecting Brake dust.
View detail
Fits: HONDA VTR1000F, HONDA VTR1000F, HONDA VTR1000F, HONDA VTR1000F, HONDA RVF, HONDA RVF, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VFR750F, HONDA VFR750F, HONDA VFR750F, HONDA VFR750F, HONDA VTR F, HONDA VTR F, HONDA VTR F, HONDA VTR F, HONDA VTR F, HONDA VTR
SUNSTARPremiumRacing disk rotor for cb400sf
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking power has increased considerably.
[Included Parts:were they on?
Included Parts:is only 2 brochures
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
View detail