Reviews
Fits: YAMAHA TZR250, YAMAHA XJR400, YAMAHA TDM900, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA MT-01, YAMAHA FZR600, YAMAHA FZR600, YAMAHA YZF600 THUNDER CAT [Thundercat]., YAMAHA YZF-R6, YAMAHA FZS1000 FAZER [Feather]., YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA ROADSTAR1600 [Roadster]., YAMAHA ROADSTAR1700 [Roadster]., YAMAHA TZr125 R (4DL) for Front, YAMAHA TZr250 R (3XV) for Front, YAMAHA TZr250 RS (3XV) for Front, YAMAHA FZr400 RR (3TJ) for Front, YAMAHA FZr600 SFAZER 98 for Front
Brake Pads
This is the first time I have purchased and used this Manufacturer's Brake Pads.
I've only replaced them with less than 200km of driving, but the effect is a little softer than my previous Brake Pads.
I think it's like
I am hoping that after a few more runs, it will adjust and become the ideal effect for me.
View detail
Fits: YAMAHA TZ250GP, YAMAHA TZ250, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R400R GK76A, SUZUKI GSX-R400R GK76A, SUZUKI GSX-R1100 GV73A, SUZUKI GSX-R1100, TRIUMPH TT600, TRIUMPH TT600, TRIUMPH TROPHY900 [Trophy 900]., TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH SPRINT ST [Sprint]., TRIUMPH SPRINT ST [Sprint]., TRIUMPH SPRINT [Sprint] RS, TRIUMPH SPEED FOUR, TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH Rocket III Classic
This is enough♪
It was time for a replacement, so I purchased Repeat.
I was thinking of using a Type above a top ranking, but...,
As a result, we decided to use the same Type as the previous one, which has a proven track record.
If you want to go to the Corner while leaving the Brakes behind, you can do so.
I would like to have just a little bit of Control...,
And that's good enough for me, overall.?
View detail
Fits: YAMAHA XT400E ARTESIA 4DW, YAMAHA TZR50R 4EU, YAMAHA TZR50R 3TU, YAMAHA TZM50R 4KJ, YAMAHA TDR125R 3SH, YAMAHA YSR80 3AX, YAMAHA YSR50 2UE, YAMAHA YSR50 2AL, YAMAHA XT500 3ST, YAMAHA XT500 3BH, YAMAHA XT400 4DW, YAMAHA XT350 3NV, YAMAHA XT250T 48Y, YAMAHA serow225 [serow] w 4jg, YAMAHA SEROW225 [SEROW] 1KH, YAMAHA DT80 53W, YAMAHA DT80 2UW, YAMAHA DT50R 4CT, YAMAHA DT50R 3HL, YAMAHA DT200R 3ET
good on cost
Used on the Front of YAMAHA YSR80.
The control is neither good nor bad.
I don't know about the durability performance yet, but since it is for commuting, I think it is a repeat purchase at this price.
View detail
Fits: SUZUKI WOLF250 [Wolf] VJ21A, SUZUKI TL1000R VT52A, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI RG250γ GJ21A, SUZUKI RG250γ GJ21A, SUZUKI RF600R, SUZUKI Katana 600, SUZUKI Katana 600, SUZUKI INAZUMA400 [INAZUMA] GK7BA, SUZUKI INAZUMA1200 [INAZUMA] GV76A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX-R750W, SUZUKI GSX-R750W, SUZUKI GSX-R750SP, SUZUKI GSX-R750R
Surprisingly good.
I have experience with Front, but this is my first time with Rear, so I'm not sure yet, but it's the same product, so I'm not sure about Control.
Was good
I think the durability will hold up pretty well since I don't use it as much as Front.
View detail
Fits: SUZUKI SV1000S VT54A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI GSX-R750, SUZUKI GSX-R600W, SUZUKI GSX-R600, SUZUKI GSX-R400 GK71F, SUZUKI GSX650F, SUZUKI GSX600R, SUZUKI gsx1100s katana gu76a, SUZUKI GSR600, SUZUKI GSR400 ABS GK7EA, SUZUKI GSR400 ABS GK7EA, SUZUKI GSR400 GK7EA, SUZUKI GSR400 GK7EA, SUZUKI GSF1200 GV79A, SUZUKI GSF1200 ABS GV79A, SUZUKI Bandid 1250 ABS GW72A, KAWASAKI ZZR400 ZX400N, KAWASAKI ZZR400 ZX400N
Cospa best
This is sufficient as it can be used from Circuit to Touring without any problems!
Control was good and durability was especially good, so this is my standard!
View detail
Fits: KAWASAKI KLX140, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, YAMAHA TT250 R, TRIUMPH SPEED MASTER 800, YAMAHA XTZ750 SUPERTENERE, SUZUKI DR250 S HE SJ44A, SUZUKI DR250 S SJ44A, SUZUKI DR250 SH SJ44A, SUZUKI DR350 DK41A, SUZUKI DR350 S DK41A, SUZUKI DR350 SE DK41A, SUZUKI RMX250 S PJ13A, SUZUKI RMX250 S SJ13A, YAMAHA DT200WR 3XP, HONDA REBEL 125, HUSQVARNA WEX610, HUSQVARNA WMX125, HUSQVARNA WMX250
I had never considered RearPad in depth!
DownshiftEngine braking is used to enter the Corner, so I don't use the Rear brake as much, but it is best to feel the Touch-fee Ring and braking sensation when it is needed. View detail
Fits: SUZUKI WOLF250 [Wolf] VJ21A, SUZUKI TL1000R VT52A, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI RG250γ GJ21A, SUZUKI RG250γ GJ21A, SUZUKI RF600R, SUZUKI Katana 600, SUZUKI Katana 600, SUZUKI INAZUMA400 [INAZUMA] GK7BA, SUZUKI INAZUMA1200 [INAZUMA] GV76A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX-R750W, SUZUKI GSX-R750W, SUZUKI GSX-R750SP, SUZUKI GSX-R750R
Price suitable
I put it in Rear.
It doesn't stop at a reasonable price.
It did not lock even when I stepped on the Brake quite hard.
Control was a good feeling, so I am satisfied with it.
View detail
Fits: SUZUKI DR250 SE for rear, KAWASAKI KDX250 R for rear, YAMAHA YZ250, YAMAHA YZ125, SUZUKI TS200R, SUZUKI RM250, SUZUKI RM125, SUZUKI DR650 SE, KAWASAKI KX500, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX650, YAMAHA YZ250WR 90 for Rear, YAMAHA XT250 X DG17J for Rear, YAMAHA XG250 TRICKER DG10J for Rear, YAMAHA WR500 Z 92-93 for Rear, YAMAHA WR200 92-97 for Rear, YAMAHA WR125 91-97 for Rear, YAMAHA TY250Z SCOTISH 4ML for Rear, YAMAHA TT600 R 93-95 for Rear
TouringSEROW
It was a gamble purchase as it was not listed in the compatibility chart, but it was installedLarge sturdy. The price is too low and I wish they would offer more shipping options. View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
Stops well and lasts long
I didn't expect it because it was so cheap, but it is a very good product.
Stops well and lasts a long time.
There is no absolute power production, but it is fine for normal use.
Recommended
View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
It is a good item
We used this product because the OEM Product was discontinued and we had no choice.
It is a good and inexpensive product.
I'm not sure how well it works in Circuitetc., but just a normal ride.
Then I don't think it will be a problem.
View detail
Fits: HONDA CB50, SUZUKI RM65, SUZUKI RH125, SUZUKI DR200, HONDA MB5, HONDA CR80R, SUZUKI TS250 X 87-89 for Front, SUZUKI TS125 X 85-88 for Front, SUZUKI SX200R SH41A for Front, SUZUKI SX125 R 85-91 for Front, SUZUKI SP250 85 for Front, SUZUKI SP125 86-88 for Front, SUZUKI RA125 SF13A for Front, SUZUKI GX125R 88 for Front, SUZUKI DR125 S SF41A for Front, SUZUKI DR125 E SF41A for Front, SUZUKI DJEBEL200 SH42A for Front, SUZUKI DJEBEL125 SF44A for Front, KAWASAKI KX65 KX65A for Rear, KAWASAKI KSR110 KL110A for Rear
Purchased for Eliminator125
I bought this for my Eliminator125 that I purchased a year and a half ago. I purchased the Eliminator125 at a certain Shop, but the Brake Pads were worn out, and the Slide pin on the Brake Caliper was solidly stuck and not working, so I think the Brake Pads were worn out. I believe that the Brake Caliper was not working solidly and that the Brake Pads were worn out. I bought a new used Caliper, replaced the packing, overhauled the Brake Caliper, changed the brake wheel, and installed this Disc Brake Pads. Slide pin and Piston are now working smoothly and the Brake is now working at its best.
I don't know about durability, but I think it is a bad product.
View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
Cospa best
Scooter parts must be inexpensive.
I am concerned about the durability as it has not been run yet.
View detail
Fits: BUELL CYCLONE M2 [Cyclone]., BUELL FIREBOLT XB9R [Firebolt]., BUELL LIGHTNING XB9S [LIGHTNING]., BUELL LIGHTNING XB9SX [LIGHTNING]., BUELL THUNDERBOLT S3 [Thunderbolt]., BUELL X1 Lightning, BUELL XB12SCG, BUELL XB12SS, BUELL XB12X, HONDA CB400SF, HONDA CB400SF, HONDA NT650V DEAUVILLE [DOUVILLE]., SUZUKI XF650 FREEWIND [Free Wind]., TRIUMPH DAYTONA955i [Daytona]., TRIUMPH STREET TRIPLE, TRIUMPH TT600, BUELL Blast 00-05 for Rear, BUELL S1 Lightning 98-00 for Rear, BUELL THUNDERBOLT Shoulder Bag S3 T 98-05 for Rear, BUELL X1 Carbon Fiber Extreme 98-99 for Rear
High quality Break pads
I used the break pads for my bike and these are great break pads. Last longer and breaking quality is good. Overall performance is great as well View detail
Fits: HONDA CB50, SUZUKI RM65, SUZUKI RH125, SUZUKI DR200, HONDA MB5, HONDA CR80R, SUZUKI TS250 X 87-89 for Front, SUZUKI TS125 X 85-88 for Front, SUZUKI SX200R SH41A for Front, SUZUKI SX125 R 85-91 for Front, SUZUKI SP250 85 for Front, SUZUKI SP125 86-88 for Front, SUZUKI RA125 SF13A for Front, SUZUKI GX125R 88 for Front, SUZUKI DR125 S SF41A for Front, SUZUKI DR125 E SF41A for Front, SUZUKI DJEBEL200 SH42A for Front, SUZUKI DJEBEL125 SF44A for Front, KAWASAKI KX65 KX65A for Rear, KAWASAKI KSR110 KL110A for Rear
3rd replacement Front Brake Pads
I've been replacing the Brake Pads on my MAGNA50 for less than a month.
I don't know about durability or anything yet.
I think the feel is good.
I had to replace it because it was worn out and no braking at all in the rain.
I still feel that it is difficult to work when it rains.
But this is a Fluid issue and
Caliper may be the cause of the problem.
It is unclear if it is performing as it should.
I'm on a moped, so I maintain my own Brakes.
If you're on a Motorcycle with more Speed.
It is better to hire a specialist.
View detail
Fits: YAMAHA XJR400S 4HM, YAMAHA XJR400RII 4HM, YAMAHA XJR400R 4HM, YAMAHA XJR400 4HM, YAMAHA DIVERSION600 [DIVERSION]., YAMAHA TZR250RS 3XV, YAMAHA TZR250R 3XV, YAMAHA TZR250R 3XV, YAMAHA TZR250 3MA, YAMAHA TZR250 1KT-2XT, YAMAHA TZR125R 4DL, YAMAHA TZR125 3PA, YAMAHA TZR125 2RM, YAMAHA TZR125 2RL, YAMAHA TZ250, YAMAHA TZ125, YAMAHA TDR250 3CL 3CK, YAMAHA SRX600 1JK, YAMAHA SRX400 3VN, YAMAHA R1-Z 3XC
It's a great cosmetic
Used for FZr250R.
I don't like Rear brake that works too well, so I chose this product because the expensive ones don't feel right and are too expensive.
At this price, I can replace it frequently, and I am satisfied that it works just as well as I had imagined.
I don't know yet about durability, but I think it will work without any problems as far as quality.
View detail
Fits: HONDA VFR400, HONDA NR750, HONDA RVF750 R, HONDA VFR750 R, HONDA CB1000 Super Four, HONDA X4, HONDA CB400SF, HONDA HORNET250, HONDA NSR250 R (MC18) for Front, HONDA NSR250 SP (MC18) for Front, HONDA NSR250 R (MC21) for Front, HONDA NSR250 SE (MC21) for Front, HONDA NSR250 SP (MC21) for Front, HONDA NSR250 R (MC28) for Front, HONDA NSR250 SE (MC28) for Front, HONDA NSR250 SP (MC28) for Front, HONDA CB400SF version S F2V 96 for Front, HONDA CB400SF version S F3T 96 for Front, HONDA BROS400, HONDA RVF400 R (NC35) for Front
Anyway cheap
The hole where the Pat pin goes in was deformed or the Pin did not go in.
Quantity:Quantity because I bought 2 Sets.:1 Set of 4pcs. but all are the same.
I forced the pin through and griggled it and it passed lightly, but I am concerned that it will not rattle when used as is, I hope it was just hard because of the paint getting in it.
Compared to other companies, it is by far the cheapest, so I would like to see its durability and decide whether I would choose it again next time.
View detail
Fits: BUELL CYCLONE M2 [Cyclone]., BUELL S1Lightning, BUELL S3T Thunderbolt, BUELL THUNDERBOLT S3 [Thunderbolt]., BUELL X1 Carbon Fiber Extreme, BUELL LIGHTNING X1 [LIGHTNING]., BUELL X1 Racing Stripe, HONDA CB1300SF SC40, KAWASAKI Ninja ZX-7RR ZX750N 96-98, HONDA CB1300SF SC40 98, KAWASAKI Ninja ZX-7RR ZX750N 96-98, HONDA CB1300SF SC40 98
I doubt the quality.
The OEM pad was worn out, so I purchased this product after asking for confirmation of conformity, but even though it was installed properly, the brake rotor interfered with the brake pads because the length of the surface where the plate that holds the brake pads hits the brake pads was different.
I returned it to Manufacturer for inspection and they said no problem!
However, when I return to OEM, the problem area is not interfered with and there is no problem. (The shape is obviously different compared to the OEM parts.)
I was dissatisfied and the product was StressLarge with no progress even though I sent an email asking for pictures and descriptions of the installation.
View detail
Fits: SUZUKI XF650 FREEWIND [Free Wind]., SUZUKI DL1000 V-STROM [V-strom]., SUZUKI DL650 V-STROM [V-strom]., SUZUKI rv200 vanvan [vanvan] z nh41a, SUZUKI RV200 VANVAN [Vanvan] NH41A, SUZUKI RV200 VANVAN [Vanvan] NH41A, SUZUKI RV200 VANVAN [Vanvan] NH41A, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX750F Katana GR78A, SUZUKI GSX600F Katana, SUZUKI GS500F, SUZUKI GS500E, SUZUKI GS500, SUZUKI BANDIT600 [BANDIT]., KAWASAKI ZRX400-II ZR400E
I bought it because the price was cheap.
I bought it because the price was cheap. Unfortunately, I bought a Brembo kit and am using it. So I haven't used it. I'm going to give it to my friend and listen to the review. View detail
Fits: HARLEY-DAVIDSON FXD DYNA SUPER GLIDE [Dyna Super Glide]., HARLEY-DAVIDSON FXDL DYNA LOW RIDER [Dyna Low Rider]., HARLEY-DAVIDSON FXRS LOW RIDER [Low Rider]., HARLEY-DAVIDSON FXSTB NIGHT TRAIN [Night Train]., HARLEY-DAVIDSON FXSTS SPRINGER SOFTAIL [Springer Softail]., HARLEY-DAVIDSON FXD DYNA SUPER GLIDE [Dyna Super Glide]., HARLEY-DAVIDSON FXDL DYNA LOW RIDER [Dyna Low Rider]., HARLEY-DAVIDSON XLH883 SPORTSTER 88-95 for Rear, HARLEY-DAVIDSON XLH883 SPORTSTER Hugger 87-99 for Rear, HARLEY-DAVIDSON XLH883C SPORTSTER Custom 99 for Rear, HARLEY-DAVIDSON XL1200C SPORTSTER Custom 96 for Rear, HARLEY-DAVIDSON XL1200S SPORTSTER Sport for Rear, HARLEY-DAVIDSON XLH1200 SPORTSTER 88-99 for Rear, HARLEY-DAVIDSON XLH1200C SPORTSTER Custom 97-99 for Rear, HARLEY-DAVIDSON FLDC DYNA GLIDE CUSTOM 92 for Rear, HARLEY-DAVIDSON FLHS ELECTRA GLIDE SPORT 87-99 for Rear, HARLEY-DAVIDSON FLST HERITAGE SOFTAIL 88-90 for Rear, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC for Rear, HARLEY-DAVIDSON FLSTF Fat Boy 90-99 for Rear, HARLEY-DAVIDSON FLSTN HERITAGE SOFTAIL NOSTALGIA 93-96 for Rear
have a weakness for Brake
I was able to install it without any modification, but the Brake drags.
I grinded the mounting area with File because I thought it was caused by the rough machining of the mounting area.
View detail
Fits: YAMAHA XJR1300 RP03J, YAMAHA FZ1, YAMAHA FZ1
That's very cheap.
decidedly bought it just for the price!
I honestly don't care what Rear is as long as it's cheap.
View detail