Reviews
Repeater
I replaced the old one with an aging one, and I put it where it didn't belong. View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25
It looks better now.
Model YZF-R25
The Rear is quite dirty and it is now clean. the Brake Caliper is OEM and the Pad is DAYTONA, but I am glad I replaced it. The braking power is normally increased and I am satisfied.
View detail
Required for Master Hose replacement
[How is it used?
Purchased a new Master Cylinder with the replacement of the old one.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
I don't think there is any other manufacturer that offers this kind of product except Active.
This is a great product, you don't have to replace the entire hose, which saves you money!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
With this, you can change the Hose from MASTER to HOSE at will.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
I don't have it, but if it were a little cheaper...
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
MASTER.
[How is it used?
Purchased a new OEM hose because it is not long enough to replace the Master Cylinder.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
At first I think it's made in Japan, but when I looked it up, it's a United Kingdom brand, so it's full of luxury!
Stickers are also included in the package, so you can quickly attach them to the car body!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
Soft and easy to angle
Nothing in particular that I think is wrong.
Just for reference.
Master Cylinder：GALE SPEEDVRC
Hose length:I bought 285mm, but when I installed it, 260mm is also enough, so I recommend 260mm.
In line with this, Active's Flare block adapter" should also be purchased in conjunction with the required
[Included Parts:were they on?
Sticker
[Was there anything that disappointed you?
I don't have it!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
VERSIONBolt is not included.
View detail
Impulse purchases that were not planned
What made you decide to buy?
I bought it elsewhere, half on impulse. (Lol)
[How is it used?
This is a change from PLOTbrembo Stainless SteelCaliper Mount Bolt.
[How was the installation?
Titanium has the Merit of being lighter than Steel. However, it is necessary to apply ThreadGrease to each bolt and tighten it. If you omit or forget to apply ThreadGrease, the screws will stick, resulting in a large risk of damage to the bolts.
[How was it when you used it?
The OEM CaliperMouthBolt is 62mm long and 44g, the PLOTbrembo Stainless SteelCaliper Mount Bolt is 70mm long and 55g, the Zita Titaniumium Caliper Mount Bolt is 70mm long and 26g, 18 PLOTMount BoltQuantity:The 2pcs were enough for one Zita Titaniumium Bolt, contributing to a slight weight reduction.
View detail
Essential items for vehicles with external exhaust system replacement
After replacing the Tornado Exhaust System with Mukawa's Tornado Exhaust System, the Master Cylinder of the Rear brake stood out. I didn't like the whitish look of the Master Cylinder, so I covered it up with a Master cupCover. It looks good. View detail
Relax with Stainless Steel
20° for new Crab installation.
Aluminum is the only choice for Stainless because it cracks.
It is surprisingly shiny, so I would like something with a matte texture from Hairlineetc.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Exactly
As expected from a car model! Everything was just fit!
I could see the difference from FirstTouch even with Normal caliper.
View detail
Before the price increase
[How is it used?
I have no complaints about the NORMAL brake, but I still think that the brake should be brembo.
Was the one you received as per Image?
Red b is good for Parenthesis.
Was the installation difficult?
The installation information provided by the senior staff was helpful and made me feel at ease during the installation process.
How was your experience with it?
Touch indeed!
[Included Parts:were they on?
Banjo bolt requires additional purchase
[Was there anything that disappointed you?
None
View detail
for Brembo
The banjo bolt was also changed in order to replace the caliper with brembo. View detail
![[Super Sport] Floating Disc Left/Right Set](https://img.webike-cdn.net/catalogue/images/28175/super_sports_TS.jpg)
It is a reliable Brand.
brembo is a trusted brand when it comes to brake parts.
This time I bought it as a Brake Disc for SpareWheel to use in Race.
[Super Sport] Floating Disc is already in use, so there is no mistaking its performance.
Compatible ZX-10R models are DISC DIA. Since it is Φ330, it takes a little time for the Brake to work properly at low temperatures.
It needs to be warmed up with a firm Brake in a sighting wrap.
The higher the temperature, the more stable the Breaking can be.
View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 540, KTM SXS 250, KTM SXS 450, KTM SXC 625, KTM SX SXS 125, KTM SX 300, KTM SX F 250, KTM SX 250, KTM SX 144
I don't know.
We used Brembo for the front calipers this time.
The caliper recommendation was 15RCS, so I put it on my Grom, and the brake touch is totally different compared to the stock one.
I've been riding my CB250R and getting more and more hits, and the front brake is working better and better.
I don't feel like it's direct. Well, I've never ridden a bike with ABS before.
I knew what to expect.
It felt like the 15RCS recommended master cylinder when I gripped it.
I was tempted to put on 16RCS and compare. Sweat.
It's expensive, so I can't just change it at a moment's notice.
View detail
Beautiful
I think it took about a month to get the stuff for the CB250R, but the bike was never delivered.
I've been putting it away. Finally, I can install it.
I thought it would be nice if the calipers were at least flashily Red.
My CB250R is equipped with ABS, but I had to remove the ABS for this work.
And with the ABS sensor rings on, the centers didn't seem to align.
I'm not even concerned about the car inspection, so I feel comfortable removing it.
I don't know how well it works because I haven't hit it yet.
Well, it feels good, because you can't go wrong with radipon calipers and Brembo.
Things are very clean.
View detail
I like having a choice of lengths.
I use them all the time because of their price and ease of use.
It's nice to be able to choose the length, and it's inexpensive.
Brake Brembo conversion Used for ABS removal
I purchased 885mm this time, but I think it could have been a little shorter depending on how you handle it.
But this is the length of the caliper straight from the radipon.
The tightness must be gentle or it will cause scratches.
Careful
View detail
The real thing.
Used for Brembo conversion
Well, it comes in a set, so it's very convenient.
And there's no sense in using a different manufacturer just for the tank.
View detail
![Full spec master cylinder[VRCSeries] Clutch master](https://img.webike-cdn.net/catalogue/images/70124/BS_VRC_TS.jpg)
Clutch becomes lighter
I installed it on New Model GSX1300R HAYABUSA.
In fact, this time we are replacing VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I chose it because of the way it looked. If that's what you enjoy, then that's fine.
Finally, after installing it and running it for a bit, it feels very good - lighter than the OEMClutch, and a little bit better at 17.5mm.
※※※※ Note ※※※※
New Model GSX1300R HAYABUSA will change the clutch master, [Hill HoldControlSystem will not be available.
The reason is that with the OEM clutch switch, if the clutch is released for a moment, the switch returns, the ECU recognizes that the car is starting, and the rear brake is released. However, with the external clutch master, the switch remains pressed until all the clutch is released, so the car is not detected as starting, the rear brake remains on, and even if the Axel is turned, the car does not move forward! This is very dangerous. I would like to see any Manufacturer solve this!
↑ It may be a little confusing, but try it yourself, it will never start!
In my case, I have turned that function off.
View detail
Left Side also
Purchased this one along with a Front caliper replacement for a New Model GSX1300R HAYABUSA.
Quantity:Pair (for Left and Right) Quantity:I purchased 2pcs and here is the Left Side imprint.
The OEM was not long enough and the angle of the VERSIONBolt was different, so it had to be replaced.
However, it is not just a Hose replacement that can be used.
Caliper needs to be replaced→Hose needs to be replaced→Flare block adapter also needs to be replaced
A series of "↑" gold-dropping flows are required lol.
The old GSX1300R HAYABUSA does not have ABS, so as long as the hose from the master cylinder is replaced, it can be used as is,
For the New Model, the handling of the FrontHose has changed.
Apart from the hose from the Master Cylinder, there is a Gold hose from the ABS modulator and a Quantity hose from the ABS modulator.:2pc divided.
Therefore, first of all Flare bu Lock adapter. must be purchased.
・ Flare bu Lock adapter. https://www.webike.net/sd/24651726/Part No. FM10AN3T
Next, does the length vary by Caliper? I think they're probably the same, so here's a reference.
・Quantity:Length without 2pc Hose and Versionbolt:335mm*Quantity:2pc
But Hose alone is definitely not enough, so I purchased several Adapters below together in my case.
・https://www.webike.net/sd/1540510/ [Brake Fitting Adapter]. M10→AN3/8*2 for Caliper
45 degree Adapter
Well, there is not much information on the New Model GSX1300R HAYABUSA, so you will never know unless you try it yourself, but if you fail, your Gold will be wasted, so I will tell you everything I know and hope you will find it useful.
Next, I was a bit attracted to this product itself, especially since it has a Yellow color Tag?
Accuracy is not bad, but Quantity:I bought 2pcs, and one of them was leaking Fluid from the joint when pressure was applied, even if I tightened it from the beginning. But when I tightened it firmly one more time, it stopped leaking. I think it was because I didn't tighten it all the way to the back from the beginning after all. It has nothing to do with the quality of the product!
View detail
I'm glad I went with VRC.
I purchased this VRC when I replaced my GSX1300R HAYABUSA with a MASTER. In fact, this time, it is a replacement from VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I had to choose based on looks.
Finally, after installing it and running it for a bit, it feels very good, I feel the VRC is sufficient, I don't really need VRD or VRE except for Race.
We recommend this VRC over RCS! You will never regret it!
View detail
Body color and Match
The CylinderTank cap and the body color match each other very well. View detail
I like that it's already processed.
I bought it because it is already machined for Casting wheel. View detail