Reviews
The transformation with the simple addition this rear master cap is amazing
About quality and texture - The rear master cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the over look of the original rear brake master cylinder reservior tank with all it's plastic finishes. The transformation with the simple addition this rear master cap is amazing and I am more then satisfied with the new look. Products to buy together - A product to purchase to add a more attractive appearance to the Monkey 125 cockpit area would have to be a master cap for the front but sadly G-Craft do not have a matching product available but luckly Webike have other silver anodized options to choose from. Difficulty of installation - The installation of the rear master cap is a simple task that took 0.1 an hour to complete. Common sense and the use of your hands is all that is required to screw the cap onto the reservior tank. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the rear master cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Not attached to Rear Sets!
The SPG force is a little stronger than I expected, and it takes a lot of force to step on the pedal until the RRBrake locks, but the controllability is improved by a LARGE amount compared to without the spring. It is a very simple part, but I would have been happier if the spring force could be selected for the parts that affect the Control system. View detail
Fits: KAWASAKI Z125 PRO
Exactly to the new Crab
As the Title says, it is Exactly to brembo new Crab.
The detailed construction is also carefully finished.
View detail
Expensive but beautiful
Quality and texture information Aluminum colored products It's definitely cool about the sense of use The difficulty of installation is that I have to remove all the master cylinders Cost performance and comparison to other products specialized in g-craft WeBike packaging is always great, arriving in a week for delivery and packaging It is difficult to install concerns, precautions, or advice when purchasing and expensive. I don't recommend it, but I recommend it if you want to add more color View detail
Fits: KAWASAKI Z125 PRO
Crab type Brembo installed
[How is it used?
OEMFront brake not working too well so purchased to replace Caliper
Was the one you received as per Image?
It was perfect.
Was the installation difficult?
I asked the Motorcycle shop to install it without any problems or Trouble.
How was your experience with it?
Caliper can be mounted securely.
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Outstanding Quality
Beautiful piece. Machining quality is superb. Looks awesome on the bike. Service and delivery experience from Japan.Webike was great. View detail
A necessary addition to adopt the brake caliper upgrade
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, A necessary addition to adopt the brake caliper upgrade. The front caliper support bracket has a simple design with a strong constructed that allows for perfect positioning and alignment of the Brembo caliper.Products to buy together, To complete the brake upgrade the addition of a Brembo 2pot brake caliper to your cart is also necessary.Difficulty of installation, I can say the fitment of the front caliper support bracket for my installation was easy due to the ease of access to the mounting points using the original fasteners and the included fasteners to secure the Brembo caliper.Cost performance and comparison with other products, The pricing of this product is great, you receive apart made from a high quality material and with a high quality finish. Most of the other brands offer higher priced options.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Excellent
Hello everyone, this is a good product and I recommend it to everyone. This product can play a better role in braking .This is 100% original, you can buy with confidence. View detail
Braque is …in JAPAN!
It's Brake related. There are made overseas at half the price, but …hey….
Rather than regretting it later, I chose something that I could use with peace of mind. I am satisfied & relieved. However, I thought that the cutting marks were rather conspicuous, as was the front support. I was not disappointed with the Objection. Maybe it is because it is a hard material.
View detail
Fits: Others for Φ30 Fork
for Brembo
I was worried about installing a Brembo caliper, but decided to buy this one.
I wanted to buy Black, but there seemed to be no sales? I wanted to buy the Black one, but there seemed to be no sales, so I bought the Silver one.
It does not look bad. The included Stainless taper bolt is a nice touch.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
The best
I put it on after processing and it is great.
I would like to see it sold with this Design from the original.
View detail
Rear brake can be used with peace of mind.
When we replaced it with Rear Sets, we could not install a return spring, and we were not sure if we could install a return spring, so we installed a return spring like GCraft's Rear master.
Now you can use the Rear brake with peace of mind.
View detail
A highly detailed piece in it's design
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a polished surface. About the feeling of use, A highly detailed piece in it's design and fits in with the styling of the bike better then the original plastic material rear master cap but is still a purely cosmetic upgrade. Products to buy together, G-Craft have an extensive range of add ons to improve the appearance of the Monkey and the polished aluminum heel plates would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the rear master cap for my installation was very easy due to the ease of access and simple nature of securing the cap. Cost performance and comparison with other products, The pricing of the product is great. You receive a decorative cap made from a quality material with a matching finish. There are a few cheaper options from other brands available but they don't go into such small detail to improve the look like G-Craft. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: KAWASAKI Z125 PRO
For Crab type Brembo installation
The front brake was not working well, so we decided to replace the brake caliper.
Should I use a KITACO single push 2-pod or a Crab type Brembo? After much deliberation, I decided to go with the Crab type Brembo. For this reason, I purchased this Caliper support. I am satisfied with the Caliper support because I was able to install it without any problems and the brake works well now.
View detail
Fits: HONDA For Nisshin Rear master for NSR50
Almost Dress-up parts
Functionally, it is almost like a dress-up part, although it has the feel of recoil since it has a Spring.
This is a rather lonely area, so it feels like something is being added by making it more bulky.
View detail
G craft caliper support
I ordered two different caliper supports for both my kawasaki z1000 and z125 pro and received them both in short amount of time and installed already both of them perfect fitment absolutely will order more parts in near future thank you webike View detail
G-Craft Reserve Tank-Less Kit Type 3
About quality and texture Good design and quality About the feeling of use The components were chosen to fit the ape 100 really well Products to buy together 45518-GM9-711 45520-GM9-711 Difficulty of installation easy Cost performance and comparison with other products be better than the standard About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing When thinking about the rear brake oil reservoir holder in the process of converting to an ape100 disk, this product can be used better and the design is cool View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Aluminum Billet master end
I have a collection of G−CRAFT around the Rear master. View detail
Fits: HONDA For Nisshin Rear master for NSR50
Easy to install
Nut in the second photo is not included.
Adjustment Dial is a transparent plastic Screw
Please be careful not to lose it, as you will be saddened if you lose it.
To be honest, there is no problem without it.
To be clear, we hired them based on looks alone.
View detail
Rigidity and Beauty
My Monkey-R has NSR50 front forks, so I installed Brembo 4P calipers using this product. The rigidity of this product is also very strong, so I feel secure even when braking hard. G-CRAFT products in general have a beautiful finish, so I am satisfied with the appearance as well. View detail