Reviews
Brembo P2 rear caliper
About quality and texture Great finishing. Top Brembo quality. About the feeling of use Worth the money. Brake strength is just nice. Equal quantity to the the stock. Not too much or little braking power. Products to buy together I bought the Glid caliper holder for my Z900RS. Fits perfectly. With beautiful outlook. The striking Red Brenna logo stands out from far as I install a short muffler. Difficulty of installation Fits perfectly with the caliper holder without difficulty. Make sure you holder has screws to hold the caliper as it doesn't come with it. Fitting it to the caliper takes about 5 minutes. Cost performance and comparison with other products Worth the price for it's performance. Quite standard braking power with a reasonable price. About shipping and packaging Comes with a box but the warranty seal was broken when I received it. But no issues with the caliper. Any concerns, cautions, or advice when purchasing No issues with fitting and buying. Waited a short while when it's stated out of stock. View detail
GILD Rear Caliper holder for Brembo P2 rear brake
About quality and texture Top quality aluminum bracket. With smooth finishing. The weight feels ok. Not too heavy or too light. It also comes with brembo fiting stainless steel screws. About the feeling of use Looks perfect in silver with my gun metal brembo rear brake. Products to buy together Bought it with brembo P2 with red logo. Item number 20.B852.78 Difficulty of installation Installation maybe shorter if the rear rim is easily removed. The fitting of the rim which takes a while. I replaced my rear hose so the total time about 2 hours. But just fitting the caliper and bleeding the hose maybe just an hour. Cost performance and comparison with other products Price is around slightly cheaper than the other brands but the finish is not short of the others I guess. About shipping and packaging Come in plastic wrap with bubbles wrapping for protection by seller. Shipping cost is not expensive as the item is not very big. Any concerns, cautions, or advice when purchasing The only concern is that the item maybe scratched as it's only cover by plastic but the seller did a good job by protecting it. And the item is made not easily scratch too. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA FZ1-S, YAMAHA FZ1 FAZER GT, YAMAHA FZ1 FAZER, YAMAHA XZR900, YAMAHA MT-09 SP, YAMAHA FAZER8, YAMAHA FZ8, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-07, YAMAHA XJ6S, YAMAHA YZF-R6, YAMAHA XJ6S, SUZUKI SV1000, YAMAHA XJ6N, YAMAHA XJ6 DEVERSION F
7 Days to go 7887 km!
As per usual, not only was it less expensive to buy and ship from WeBike, it came packed very well in a nice WeBike box! If you are from North America or in other parts of the world don't think twice about buying from WeBike. Every one of my many purchases have been very positive. That and the selection is great! View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
Upgrade OEM
The Bleeder Bolt from bremboCasting caliperOEM was not very accurate in machining the screw threads, and as I continued to use it, the damage became noticeable, so I decided to use Material:Replaced with Stainless Steel ones. View detail
Reliable Manufacturer
Since the parts around the Brake are vital, we chose a reliable Manufacturer.
The fact that there are many different lengths is also helpful, so that when the distance between the BrakeCaliper and the MASTERCylinder changes from the OEM, such as by changing the handlebar, the user can choose just the right length.
View detail
Replacement for Radial masterCylinder change
When we changed from Horizontal Type MasterCylinder to Radial Type MasterCylinder, the Banjo Adapter was installed in a larger position, so we had to install it. View detail
Fits: HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA XJ6S, YAMAHA XJ6F, YAMAHA XJ6F, HONDA Africa Twin650, HONDA VTR250, HONDA VT250SPADA, HONDA VFR400 PRO ARM, HONDA VT250 INTEGRA, HONDA VRX400R100 ROADSTER, HONDA Rebel500, HONDA Rebel250ABS, HONDA Rebel250, HONDA Rebel250 S Edition, HONDA Rebel1100, HONDA Rebel1100, HONDA NSR250SP
I bought the DaytonaRedPad because it works.
The NormalPad has a sizzling sensation, while the RedPad has a gut feeling instead of a thumping sensation. View detail
Processing is beautiful
Bolt and Shim will be provided separately.
M10×25?Pitch1.5 and M10×25?Pitch1.25 are available.
The processing is beautiful and the rigidity seems solid.
I would have liked Bolt and Shim to be included if possible.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Active Rear Caliper support
Purchased this for the Swing Arm and to replace it with a Brembo caliper. View detail
It's good to have the self-satisfaction of using BremboOEM's Titaniumium pad pin.
[How is it used?
After many years of use, the Coe?? Stainless Steel Pad Pin was experiencing paint peeling due to friction and color change due to baking.
Therefore, we replaced it with this Titaniumium pad pin, which is a Brembo OEM part.
My vehicle has been replaced with NorthLine caliper support, BremboRacing caliper, ZCOO brake pads, and BRAKING 320mm brake rotor.
Was the one you received as per Image?
The dull shine of Titanium was more luxurious than the Image in the picture.
The Brembo is a little lighter than the Brembo. The Brembo is lighter than the Brembo in terms of weight.
Was the installation difficult?
It was not difficult.
Even amateurs can replace them if they have Pliers.
How was your experience with it?
I honestly don't know since the weight reduction is in tens of Grams?
It is good because I can indulge in the self-satisfaction of using Titanium.
[Included Parts:were they on?
Clip to stop Pad pin is included.
(It is in the attached image.)
[Was there anything that disappointed you?
I was not disappointed. I did not expect the weight reduction due to the fact that the parts are small in size.
Installation Point or hang
Tension Spring Tools allow for easy removal and installation without scratching.
Availability and clarity of Instruction Manual
Instruction Manual is not included. It is not a complex component that should be included.
important point
It would be good if you do not neglect to visually check and test run the Clip to make sure it is inserted securely.
Items to buy together
As mentioned above, Tension Spring Tools.
Opinions and requests to Manufacturer
Not particularly
View detail
Fits: HONDA Monkey125, HONDA Monkey125, HONDA SUPER CUB110, HONDA CT125, HONDA CT125, HONDA GB350S, HONDA GB350
Excellent Quality
This is very well machined. Dimensionally its better than mitomo. Always high quality from Yoshimura. Another little trinket that sets the bike off. View detail
Parenthesis OK
All YOSHIMURA lovers will have it on.
It goes without saying.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
LOOKS GREAT!
These fitted really easy and had no problems fitting them to the motorbike. i was really happy wth how they fitted and they made the bike look really good. The polished finish really made the bike look great! View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 100, HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY BAJA
Very nice product
These fitted really easy and had no problems fitting them to the motorbike. i was really happy wth how they fitted and they made the bike look really good. The polished finish really made the bike look great! View detail
Large changeable satisfaction
It is a self-satisfied product, but I am satisfied with the Large change! View detail
Fits: APRILIA PEGASO 650 TRIAL, APRILIA PEGASO 650IE, APRILIA PEGASO STRADA 650, APRILIA DORSODURO 750, APRILIA DORSODURO FACTORY, APRILIA SHIVER, APRILIA SHIVER GT, APRILIA CAPONORD 1200, APRILIA CAPONORD 1200RALLY, APRILIA DORSODURO 1200, BMW C1 125, BMW C1 200, BMW G310GS, BMW G310R, BMW G650 X MOTO, BMW F800GT, BMW F800R, BMW F800S, BMW F800ST, BMW F800ST TOURING
I have tried to work with Nisshin in BaEvele!
I like new things, and I had never seen so many choices of Nisshin's Brake Pads, so I bought them without a second thought.
It was only available for JigSar, but of course it is the same, right? So we used it with DL1000 V-STROM250SX.
I'm Snap and I'm perfect. I feel like I'm getting more reliable!
View detail
Stable performance and appearance
Stable quality and appearance. I don't need to change it because the latest liter machines are NORMAL and mesh, but I am happy to see that SmallEngine Displacement Volume improves the look and still Touch significantly. View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA YZF-R25
On the 2020 R25.
I put it on my R25 with Inverted Front Fork normally without any problem.
The durability is unknown, but the construction is solid, so it should be no problem. I am satisfied.
View detail
![[Yamaha Stock] Brembo Radial Brake Master Cylinder ASSY](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0289/24980842_20211228131537152_TS.jpg)
Fits: YAMAHA YZF-R7
Diversion to 2020 R25
It has to be pointed slightly downward to hit the FrontOwl. However, if the hose is pointed down, it will interfere with the joint part of the brake hose. I ended up cutting off the interfering part and was able to attach the hose. View detail
An unlikely product!
[How is it used?
All OK for everyday use!
Was the one you received as per Image?
Beauty is better than Image, and the price is right!
Was the installation difficult?
Simply tighten the bolt!
How was your experience with it?
I was able to eliminate the fear that the cable might deteriorate due to the friction of the tire.
[Included Parts:were they on?
Bolt for tightening is included!
[Was there anything that disappointed you?
I don't have it in my possession, but I would like to have the instruction manual.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have the impression that Freak's Pit has a variety of products, many of which I personally think look custom, and if there is a product that tugs at my heartstrings, I'm willing to give it a try.
View detail