Reviews
![PREMIUM ZONE Master cylinder tank cap [NISSINΦ59]](https://img.webike-cdn.net/catalogue/images/19870/92729_T01_TS.jpg)
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
Good texture
Cap replacement only, It is easy to install.
The quality is good and I like it very much.
I'm glad that it has a little accent and a custom feel to it.
View detail
Fits: Others
Used on DTRACKER125
The products are high quality and well made.
The length could have been 2.3 cm shorter, but we chose a slightly longer length than OEM to give us more room to work with the Banjo adapter. (At the same time, the Master Cylinder was also replaced with Other Brand Product.)
The color of the wire is black, and it is installed in a shade that does not fight with the Accelerator Wire and Clutch Wire, which is nice and sober.
The drawback is that the heat shrink tube is used in the terminal process of the hose guide, but without a heat gun, the tube will not shrink. (Can a high performance dryer do it?).
I had no choice but to carefully fry it with a TURBO lighter and cut it off when the finish was not so bad.
Therefore, it might be better to buy a separate Heat Shrink Tube that shrinks even at low temperatures. Maybe you can find something like that in the PC parts section.
View detail
The only one that has a lot in it is this Manufacturer?
I bought it because I thought it was the most affordable and trustworthy.
It works perfectly fine.
If it were a little cheaper, there would be nothing to say, but, well, the replacement Cycle is not that fast, so I am generally satisfied.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Used for city driving
It is used for city driving.
Controllable and good feeling. It is less scary even on rainy days. The price is not too expensive and I like it.
I will report again on durability.
View detail
![Brake Pad - Racing [RC] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0276/23955303_1_TS.jpg)
Fits: HONDA VFR800F, HONDA VFR800X, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR
Satisfied with cost-effectiveness as For RacingPad
I installed it on Circuit Running's CBR600RR (PC40 2011).
Speaking of brembo's racing pads, Z04, Z03 for endurance, and Z10 recently released are the standard, but they are expensive...
I chose the far cheaper RacingCompound (RC) since it is not used for Solidly's Race.
Before the replacement, it was a replacement from HRC (Honda's RaceParts) N615.
This was not a complaint, but the Quantity:30,000 yen for 1 Set for 1 Vehicle...
The bremboZ03 is a Quantity:40,000 yen for 1 Set for 1 Vehicle....
I was a bit worried about the price of the racing pad, which is less than half of the price of the racing pad, but brembo claims it is "for Race", so I was a bit nervous and had mixed expectations.
bremboRC is a CarbonCeramic system, which means it is not sintered.
Some people think that it has to be Sintered, but in conclusion, there was no problem.
Since the pad brand was changed, the disc surface was peeled with steel wool (Bonnstar) at the time of replacement.
Of course, when we replaced the pad, we also cleaned the Piston and replaced the DOT 5.1 Fluid. We finished it perfectly.
Here are my personal impressions after using it at Sports LandSUGO.
Control is good from the beginning to the back.
The μ at low temperatures is not extremely low, and there is no need to be conscious of heating to raise the temperature.
Even when the temperature rises, there is little change to BrakeTouch, which is a good impression (although it is also a new pad).
Low thermal strain, good strength of back plate
The surface of the disc becomes black due to the effect of heat and the carbon film.
The braking force of △ Full Brake is milder (less potent) than HRC/N615, and it would be easier if it bites a little more.
The amount of Dust powder on the Wheel is small, so it is expected to be more Life than HRC N615.
So I feel a slight difference in efficacy compared to the high price FOR RacePad, but it is a much higher dimension than OEM, and from the Balance of price and Brand reliability, I am glad I bought it.
Since the BrakeCost per pc driven drops to about half the cost, I can add that floating budget to the Tire cost.
View detail
![BRAKE PAD-DRAG ORGANIC [1720-0197]](https://img.webike-cdn.net/catalogue/images/35311/17200197_TS.jpg)
Accuracy...
The hole where the pin goes in was distorted and needed to be scraped with a file. It is not a large problem with a little work, but if you don't have a file, you cannot install it. This is why the quality rating is so low. View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 400R, HUSQVARNA NUDA900
I think it is a good, inexpensive product.
This is a Rear Brake Pads replacement for a 2022 Gixxer 150, note that the pad numbers are different until the 2019 model year!
https://imp.webike.net/article/636864/
To replace it, remove the pin, remove the shaft, and replace it.
The worn out pad has a pod sticking out, so a new pad will not fit in the gap, so a push-back tool is used to put it back in.
If this work is not done well, the pad will not fit, so the skill in this area depends on the person, and it is an important part, so if you don't have an earthquake, have it done at a store.
The Pad is neither good nor bad, and I continue to use SBS, which is cheap like DAYTONA's RedPad, so I guess it's a matter of preference.
View detail
Fits: YAMAHA VMAX , HONDA FTR223, KAWASAKI GPZ900R, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR400, YAMAHA VMAX, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MAJESTY250(4HC), YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YBR250, YAMAHA YZF-R1
Cospar good
Since it is DAYTONA, it is safe.
It is more subdued in appearance than other Mesh hose.
Banjo bolt and Washer if attached.
It was even better.
A is Straight and 20 degrees though,
I would have liked to have had 20 and 20 degrees if possible.
View detail
Fits: HONDA VALKYRIE1500 TOURER, KAWASAKI VERSYS 650, SUZUKI GEMMA250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSX250R, SUZUKI INAZUMA250, SUZUKI V-STROM 250, SUZUKI IMPULSE400, SUZUKI IMPULSE400 TYPE-S, SUZUKI RF400R, SUZUKI RF400RV, SUZUKI SKYWAVE650, SUZUKI SKYWAVE650, SUZUKI GSF750, TRIUMPH STREET TRPLE675, TRIUMPH BONNEVILE800, TRIUMPH BONNEVILE865, YAMAHA CYGNUS X
It stops better than NORMAL.
It stops more than NORMALPad.
It's about half as thick.
It is easy to control and suitable for touring and winding. Considering the cost performance, it is about half the thickness, so I think it is not the most expensive one.
I'm not sure it is suitable for Circuit or Sports driving applications.
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Perfect for dress-up!
The dress-up effect is great.
It also feels right in use.
View detail
![[Short Lever] Brake Master Cylinder Kit [Horizontal Type 1/2-inches/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/43336_TS.jpg)
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, HONDA XR230, HONDA XR250, SUZUKI VX800, HONDA SL230, HONDA PCX150, HONDA PCX125, HONDA NSR80, HONDA NSR50, HONDA NSR250R, HONDA NSF100, HONDA NS50F, HONDA MBX80 Integra
Matching with Caliper
Purchased a 1/2-inches diameter short lever to replace the front caliper with a Brembo crab caliper.
Piston diameter 32mm in combination with Caliper (hydraulic pressure ratio 6.35) is
No Control at all with stiff Touch.
Piston diameter 34mm in combination with Caliper (hydraulic pressure ratio 7.17) is
Good Controllability, although a little softer than the preferred Touch.
If it were a standard Lever, would the former combination have been acceptable?
View detail
Fits: APRILIA RSV Mille, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI 748 S, DUCATI 750SPORT, DUCATI MONSTER 750, DUCATI 748, APRILIA TUONO V4, DUCATI MONSTER S4R, APRILIA TUONO1000 FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R, DUCATI ST4S, DUCATI MONSTER 620, APRILIA RSV4 R APRC, APRILIA RSV4 FACTORY APRC, MOTOGUZZI V7 CLASSIC, KTM 690 DUKE R, KTM 990 SUPER DUKE, MOTOGUZZI 1200 SPORT 8V
I feel like I have more Control.
Inner rotor is made of material.:The design is close to OEM, so I don't feel any discomfort after the replacement. The durability (life span) is yet to be determined.
This is just my subjective opinion, but so far I can't find anything wrong with it. I wish the price was a little lower, but I think that is too much to ask for....
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Maintenance.
I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL!
View detail
![[NISSIN Repair Parts for Master Cylinder] Piston Set Only For 1/2 Inch](https://img.webike-cdn.net/catalogue/10722/75495_image-1_TS.jpg)
For the Retro Brake Overhaul
I don't know the make and model of the Brake that came with the Motorcycle, but when I rose it, I thought I could overhaul it with this kit, so I bought it.
It was a great help to be able to overhaul it beautifully!
View detail
Fits: HONDA CMX/REBEL 450, HONDA CB125TD, HONDA CB125T, HONDA XL600V Transalp, HONDA XL600V Transalp, HONDA VT500FT Ascot, HONDA VP750CH Custom, HONDA VL750R, HONDA VFR400Z, HONDA VF750S, HONDA VF750F, HONDA VF750C V45 Magna, HONDA VF750C V45 Magna, HONDA VF700S Sabre, HONDA VF700F Interceptor, HONDA VF700C Magna, HONDA VF700C Magna, HONDA VF500F, HONDA VF500C V30 Magna, HONDA VF400F
Brake Pads Replacement
I used VesrahResin pad for the first time and it worked well enough for city driving and touring. Although the mileage is still low, the brake squeal has stopped. I would like to check the effectiveness and the aggressiveness to the rotor in the future.
If the results are good, we would like to continue using it.
View detail
Cheap and satisfying
I've been able to use it with no problems.
It was cheap, readily available, and satisfactory.
Since they are consumable items, it is safer to replace them regularly, so it is helpful that they are easy to buy.
View detail
![[Super Sport] Floating Disc Left/Right Set](https://img.webike-cdn.net/catalogue/10188/floating_disc_image_TS.jpg)
Fits: KAWASAKI ZX-6R Ninja, KAWASAKI ZX-10R Ninja, KAWASAKI ZX-6R Ninja, KAWASAKI ZZR1400, KAWASAKI ZX-10R Ninja, KAWASAKI Z800e, KAWASAKI Z800, KAWASAKI Z800
I heard prices are going up, so I bought ahead of schedule.
I had planned to buy it a little further down the road but was told that the price would be raised next month.
A friend of mine had installed a 320mm, so I thought, "I'll get one too! But just before I went out, I decided to buy a 310mm because I didn't want to bother with Caliper adjustment! LOL!
The impression is that it is cost-effective and easier to handle than expected.
However, I am concerned about durability since this is my first time with Full floating.
View detail
Replaced in conjunction with MAJESTY250's MASTER replacement
Both front and rear Brakes of MAJESTY250 were replaced together to reduce the difficulty of air venting when replacing the MASTER.
Material:I chose this Banjo bolt because it was the color I wanted in Aluminum.
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 1/2" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61739_TS.jpg)
Fits: YAMAHA Cygnus X SR, HONDA XR50 Motard, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI SV400, SUZUKI GS125, SUZUKI GS125E Katana, SUZUKI RMX250, SUZUKI GSX250S Katana, SUZUKI RG200
Used for MAJESTY 125 FBrakes custom
The MAJESTY125 and R1-Z have the same 83mm Pitch of the front brake caliper, so I used the R1-Z's caliper and changed the front brake to 4POD to strengthen the brake. So, I wanted to lower the Piston size of MASTER, and I wanted to be able to adjust the lever play by Dial as well as CB1300 Caliper, and I wanted to use a short lever. I also wanted to use short lever, so I replaced it with Nisshin's MASTER.
As expected, the brake has improved in both touch and braking power due to the MASTER's smaller-diameter piston size,
Now I have a performance problem on the Caliper side and want to replace the Caliper with the SumitomoCaliper from TZr250 after 3MA or the Nisshin caliper with 83mmPitch released from TZ125, TZ250 and AdvantageNisshin in the 90's. I'm looking for a new caliper.
View detail
Used to replace 20 year old deteriorated Normal hose.
Used to replace a 20 year old cracked and deteriorated Normal hose.
We chose this product because it is a vehicle-specific kit, so we did not have to worry about length, etc., and because there was a combination of black hose&banjo that matched the Matte Black car body.
The handlebar was replaced with a lower one than the normal one, and the direction of hose removal was different from the normal one because the Master Cylinder was replaced with a separate tank type of Nisshin at the same time& The length was a little long, but the problem of the length and the direction of hose removal were solved by making it so that the hose can be removed up like the normal type of off-car. The problem of length and direction of hose removal has been solved by changing the direction of hose removal to be up like the Normal type of the Off car.
After the replacement, the Touch is better and I can hang Brake with confidence.
View detail