Reviews
Fits: KAWASAKI KX125, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA XT250X, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA DT230 Lanza, YAMAHA DT200WR, SUZUKI Jebel 250XC, SUZUKI Jebel 250 GPS Ver., SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI DR250SHE
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
The only thing that I thought was different from the Red Pad was that it locked easily when you stepped on it with a thud, but I don't think it did that….
It may be a Large cutoff to lock, but I'm afraid to lock it so easily, so maybe this is as good as it gets.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA DT230 Lanza, YAMAHA DT200WR, TRIUMPH T955 DAYTONA, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, SUZUKI Bergman 400, SUZUKI Sky Wave 400, SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI RM250, SUZUKI RM125, SUZUKI DR250SHE, SUZUKI DR250S
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
It was before, so I don't know much about it. (Sweat)
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER SF250(ECSTAR COLOR), SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GIXXER250, SUZUKI GIXXER250, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125
It's a cautionary recommendation IMPRESSION!
It is currently a 2022 Gixxer 150 and before that it was a 2018 Gixxer 150
I ordered Rear's Brake Pads in that vein ….
Shaft position does not fit….
The shape is slightly different….
I checked again, and the Gixxer 150 has this 951 as the initial MODEL for the 2019 model year.
MAJORChanged after 2020 model was 675 in SBS
This was an IMPRESSION to warn everyone to buy after careful attention.
The rating is from the 2018 model year, affordable, not too bad or too bad for a normal ride, and that it is a recommended Pad.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, HONDA CRF250L, HONDA CRF250L SPECIAL EDITION, HONDA DAX125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA CB125R, HONDA CB125R, HONDA GROM, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125, HONDA CB250R, HONDA CB250R, HONDA CRF250RALLY <S, HONDA CRF250L <S
Ordinary, but enough for a normal ride.
exchange procedure
Remove the pin (1), apply a Phillips screwdriver or similar tool to the shaft holding the bad, and lightly tap the shaft with a hammer.
I'll remove the ? pod in case it's not too hard and try to grind it.
Click here for ?Needed Tools (excluding Wrench)
4) By the way, the decrease is like this
(5) Push back the pod with PistonTool and install it in the reverse order of the removal procedure.
View detail
Fits: HONDA CMX300AAC, HONDA CMX300AC, HONDA CMX300A, HONDA CBR400R, HONDA CBR650R, HONDA CB1000R, HONDA CB650R, HONDA 400X, YAMAHA YZF-R25, YAMAHA XVS250, YAMAHA XVS250, YAMAHA XVS250, YAMAHA XVS250, YAMAHA VMAX12, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
Fits: HONDA CMX300AAC, HONDA CMX300AC, HONDA CMX300A, HONDA CBR400R, HONDA CBR650R, HONDA CB1000R, HONDA CB650R, HONDA 400X, YAMAHA YZF-R25, YAMAHA XVS250, YAMAHA XVS250, YAMAHA XVS250, YAMAHA XVS250, YAMAHA VMAX12, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard Custom
4mini Standard Custom??
Red and Blue Collar Accent best!
The Rear hose and Swing Arm are also a good match!
Custom feeling has increased.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100, HONDA CB1300SUPERTouring, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB750, HONDA CB750, HONDA CBF1000 (06 - 10), HONDA CBF1000F, HONDA CBF600N/S (08 - 14)
Fine Alloy 55 (Fine alloy) Brake Pads
Compared to other companies' pads, when the front brake is applied, it works much better than before. View detail
Refreshing around Handlebar
Since we installed brembo 19RCSBrake master cylinder, we chose brembo tank as well.
I'm just trying to get a sense of what it's like to be custom. [Color] SmokeTank.
I was worried about the sideways mounting direction of Tank because I was only thinking of a fluffy mounting method, but in the end I was right in choosing this one. I was worried about the installation method, but in the end, it was the right choice.
RGV250Γ (VJ22A) The smallest tank made it possible to install it in the ideal position.
I do not know how it would be with an OEM Handlebar since the Handlebar is an Other Brand Product, but I was able to install it without interfering with the LimitCowl by lowering the Handlebar by about 5mm from the original position.
Needless to say, Fitting and reliability are not a problem.
Fluid tank attached to Γ's joke of a position. (A big Tank comes right in front of the water temperature gauge) I like the Handlebar area because it is very refreshing, and I am free from the
View detail
Performance remains the same, but
It's really a self-satisfied product.
Changing to this will not change Motorcycle's performance, but it will
RedMONKEY, so we are changing anything that can be changed to Red color.
The product itself shows that it is carefully made.
If you are interested in Tres Up, you must buy it!
View detail
Fits: HONDA Monkey125, HONDA Monkey125, HONDA CT125, HONDA CT125, HONDA SUPER CUB110, HONDA GB350, HONDA GB350S
Casually Fashion
I love the casual Fashion!
It's just self-satisfaction.
View detail
The amount of folds is harder to decipher, but
I bought it just to have more Red colors!
It's harder to tell how much of the folds are there, though.
I'm self-satisfied with the increase of One Point in Red color.
It is a good product without, but the quality is good and the product is good.
I am satisfied.
View detail
Fits: SUZUKI GSX-S1000 F, SUZUKI GSX-S1000 F, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI KATANA, SUZUKI GSX-S1000 F, SUZUKI GSX-S1000 F, SUZUKI GSX-S1000, SUZUKI GSX-S1000
The sense of security is extremely Large!
STD Disc sometimes seemed to have too much lever in the full breaking of the Straight end of the Circuit. In addition, the feeling during gripping and releasing was not so strong, and the on and off were very distinct. However, after switching to PremiumRACING, I feel that the braking force is applied as much as my grip, and it is easy to control the braking force I want. In addition, the braking force seems to have been dramatically increased in level, and the sense of security is extremely large. Although I have not yet ridden the circuit after the replacement, I feel that I am more in control of my motorcycle than ever before when I ride on mountain passes. View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
New Master Cylinder while replacing Lever.
[How is it used?
The Yamaha MT-25's Brake lever had been made in China since delivery and I was concerned about rattling.
I was worried about using such a product in Brake, but I was wondering what to do because OEM products are too expensive and other brand products from proper manufacturers are expensive. I was wondering what to do. I realized that if I just refurbished the Master Cylinder, it would solve everything, and I came across this product, which is a NISSIN product with a separate tank.
Was the one you received as per Image?
I have used a different Master Cylinder diameter on a different car model, so it was as per Image.
Was the installation difficult?
In the case of MT-25, of course, there is no need to consider interference with Cowl, so it is almost a simple installation.
The banjo bolt was left in place, and the brake switch was simply replaced since the terminals are exactly the same.
In my case, I had a hard time getting the air out because I had changed to Separate Handlebars.
How was your experience with it?
The OEM and Piston diameter is the same 11mm and the same sideways push, so we did not feel much change in the touch and effectiveness of the Brake.
However, with Lever's new, crisp and accurate, I feel that my peace of mind has increased many times over.
Also, NISSIN Lever's R condition etc. is so exquisite that my fingers do not get sore at all even if I ride for a long time.
It looks better and Repair Parts are readily available, so there is nothing to say about it.
[Included Parts:were they on?
Basic AlmostQuantity:It is a Set, but the Mirror Holder Bolt for M10Pitch 1.25 does not come with it.
Perhaps the M6 Tank fixed Bolt is a mistake.
It just so happened that the original Mirror Holder cap had the same cap, so I was able to use it and get away with it.
[Was there anything that disappointed you?
Not particularly
【Review】
Quantity:Pair (for Left and Right) It is great to be able to refresh the Master Cylinder for about the price of a Lever set.
Anyway, it is very reliable and has the best Touch of Lever and even Adjuster.
I have graduated from the mysterious Chinese Lever and can now ride without hesitation.
View detail
I'd be even happier with Clip.
I changed to brembo 19RCSBrake master cylinder, so the hose is also brembo's new one.
We cut about one-fifth of the tank while exploring the interference with the Cowl and where to fix the Tank.
Being brembo's Hose, the bore is naturally moderately good.
The hose clip does not come with the lens, so I tried using a clip I had on hand and found that a DAYTONA clip with an inner diameter of 10mm was a perfect fit. (11mm, maybe, or...?)
I used it with a good amount of bending, not to say 90-degrees, but I did not feel any particular strain on the hose and felt it was soft.
I appreciate the low price for the HoseSingle Body, but it would have been nice if the Hose clip was also included so I wouldn't have to go through the trouble of researching and buying one.
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
Attachment
As expected. Thank you very much. View detail
Fits: HONDA NM4-02, HONDA NC750X, HONDA NC750X, HONDA NM4-01, HONDA NC750X LD, HONDA NC700X LD, HONDA NC700X, HONDA NC750S, HONDA GB350, HONDA INTEGRA S, HONDA INTEGRA, HONDA JADE, HONDA NC700S, HONDA GB350 S, HONDA GB250, HONDA CL400, HONDA CBR250RRR, HONDA CBR250RRR, HONDA CBR300R, HONDA CBR400R
Reliable DAYTONARed Pad
I have been using Red Pad for generations for my city riding and Touring Main Machine, so I didn't feel any particular anxiety.
It seems that the previous owner had DaytonaGolden in his car, and even with the same grip, the Golden felt like it stopped with a final jerk, but the Red Pad feels like it stops naturally with the same deceleration ratio until the end when it stops smoothly, so I prefer the Red Pad for control.
This is a balance of Tire performance, disc, front fork and rider's weight, so please take this as a personal opinion.
View detail
Fits: KAWASAKI KR-1, KAWASAKI ZXR250 R, KAWASAKI GPZ400R, SUZUKI RGV250 gamma, KAWASAKI ZXR250 R, KAWASAKI ZXR250, SUZUKI RGV250 Gamma-SP, SUZUKI RGV250 Gamma-SPII, SUZUKI RGV-Gamma 250SP, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZXR250, KAWASAKI ZX-4, KAWASAKI KR-1S, KAWASAKI KR-1R, KAWASAKI GPX250R-2, KAWASAKI GPX400R, KAWASAKI GPX250R, SUZUKI RGVRG250 -SP, SUZUKI RGVRG250 -SP II
This is good. No, this is good.
[How is it used?
SEA BASSRGV250Γ (VJ22A) I purchased this product as a for Rear of
I usually use it for touring and it was about time to replace it, so I replaced it for the full-fledged start of the touring season.
How was your experience with it?
I found out at the time of exchange that the previous owner was also using a Red Pad, so the exchange was for the same product.
Gamma's Rear is very easy to replace because the entire caliper can be removed from the Support without even removing the Tire.
Naturally, the Brake works the same, etc., and there is nothing special to mention, but I am satisfied because I was not dissatisfied at all from the beginning.
The braking force is sufficient for the Rear Brake Disc Rotor, and we want to reduce the wear of the Rear Brake Disc Rotor as much as possible, so we think this is the most appropriate choice.
I like the fact that the packaging is designed to prevent the pads from hitting each other.
How did it compare to other products?
Decent may be a misnomer, but DAYTONA was the only decent manufacturer that had a lineup of VJ22A for Rear.
I chose Semi Metal's Red Pad almost exclusively for touring use, because I am a 2-stroke driver, and I am very careful with Brake.
[Points to note]
Naturally, since this is only PadBody, you should also prepare Grease and, if necessary, Brake fluid.
【Review】
It is such a standard Pad that it is almost the only choice for Gamma for Rear.
And yet it is relatively Wallet-friendly, so I wouldn't even consider anything else in my mind.
View detail
Fits: YAMAHA Cygnus X SR, HONDA XR50 Motard, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI SV400, SUZUKI GS125, SUZUKI GS125E Katana, SUZUKI RMX250, SUZUKI GSX250S Katana, SUZUKI RG200
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
Fits: KAWASAKI 1R, KAWASAKI GPZ900R, KAWASAKI KR-1S, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 2, KAWASAKI ZRX1100 2, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400 2, KAWASAKI ZRX400 2, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R
I replace them regularly.
This is a small component, but it is a large component that holds Brake Pads.
Rust-resistant Stainless Steel is easy to maintain.
View detail