Reviews
In the future, DISK is considered. It offered in the future by using a 199-mm stainless kit and choosing drum support this time, since it was tight pocketbook. It was saved by compatible parts.
In the future, DISK is considered.
It offered in the future by using a 199-mm stainless kit and choosing drum support this time, since it was tight pocketbook.
It was saved by compatible parts.
View detail
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch. A tool and stay interfere in a design frequent also as means in the case of air-bleeding. If this point is improvable, I will think that it is better.
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch.
A tool and stay interfere in a design frequent also as means in the case of air-bleeding.
If this point is improvable, I will think that it is better.
View detail
Fits: SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125G, SUZUKI ADDRESS V125
It is the caliper support at the time of equipping with a product made from brembo 2 pot caliper. A ducati vehicle (rear calipers, such as a monster and SS) is mainly equipped with this brembo caliper. And the old type and the new model exist in t
It is the caliper support at the time of equipping with a product made from brembo 2 pot caliper.
A ducati vehicle (rear calipers, such as a monster and SS) is mainly equipped with this brembo caliper.
And the old type and the new model exist in this brembo caliper.
Old type: The part by which the company name and logo mark of the brembo company were thrown into relief is cut by the caliper body.
New model: Only the logo mark of the brembo company is thrown into relief by the caliper body.
Externally, although the old type of brembo-likeness is more remarkable, since new style one will use the big pad if the face pressure of a brake pad is compared, the difference between an old type and a new model is considered for the braking nature of a brake to be high.
= Collect. = It is support for using the rear caliper by which pure wearing is mainly carried out on a ducati vehicle for the front caliper of the address V125.
In short, it is support for changing the pure piece aggressiveness caliper of the address V125 into both the aggressiveness caliper.
The bolt for concluding a brembo caliper is enclosed by this caliper support (the cap bolt of M8-20 is two).
However, as for the field which carries out bolt conclusion of a brembo caliper main part, phi16mm is prepared.
Therefore, the outside-diameter part of M8-20 newly chose the bolt which is phi16mm.
This bolt is a flange taper cap bolt made from beta titanium.
(Since the outside diameter of the head of the cap bolt of M8 is phi13mm, a bolting side becomes firm more by choosing the bolt which is phi16mm with a large outside diameter.) The real thrill of customization is in axle part or a skid base. , although it is the language to hear,
To be sure, it may be just like that!!
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://global.webike-cdn.net/photo/article/55/1209030027355L.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
ZRX400 is equipped. Since the brake pad and the brake hose were exchanged, he would like to improve appearance and it is exchanged. It is thought that the touch became good further and control nature also became good after master exchange. Doe
ZRX400 is equipped.
Since the brake pad and the brake hose were exchanged, he would like to improve appearance and it is exchanged.
It is thought that the touch became good further and control nature also became good after master exchange.
Does the one exchanged after all by a set also change a touch, and can feel effectiveness of a brake?
Recommended *竚壇(*^-繧? b
View detail
It combined with exchange of the brake fluid and exchanged brake hose. The good point (1) banjo and the hose are made into the smart, and appearance is good. (Black's color match is pleasing) A feeling of a linear of relation and piece of a clutch
It combined with exchange of the brake fluid and exchanged brake hose.
The good point (1) banjo and the hose are made into the smart, and appearance is good.
(Black's color match is pleasing) A feeling of a linear of relation and piece of a clutch carried out UP to the input of (2) levers.
If there is a tube of protection by the side of the frame near [ a little more ] the point (1) engine was felt.
(2) The case where it was pure and scramble by a clamp was carried out was considered, and if the clamp rubber is attached was felt.
Since individual liking and sense also enter, a little more point is also a portion which can arrange in oneself liking.
It is total, and it sees, and since it is pleasing, they are four stars.
View detail
YZF-R1 08 models were equipped. Have tagged the brake hose before assembly intelligibly and a description an illustration and with a photograph, Have filled in the notes at the time of attachment, etc., have equipped easily very intelligibly, howe
YZF-R1 08 models were equipped.
Have tagged the brake hose before assembly intelligibly and a description an illustration and with a photograph,
Have filled in the notes at the time of attachment, etc., have equipped easily very intelligibly, however since the vehicle is a racer replica and desorption is [ circumference of a front cowl ] needed,
The appearance (Colet is unavoidable) by which time is taken there is also good, and its effectiveness condition of a brake also improves rather than STD.
View detail
Goods considered by the very easy physical principle. Although actually attached, an effect is greatest too. A rear wheel came to act as Locke perfectly. It is still inferior to the present disk. It is recommended at those who want to stre
Goods considered by the very easy physical principle.
Although actually attached, an effect is greatest too.
A rear wheel came to act as Locke perfectly.
It is still inferior to the present disk.
It is recommended at those who want to strengthen a rear brake with a low budget, those who do not want to break down the style of an original not much, and the person who attached the back step for drums and in whom effectiveness of a rear brake became weak.
View detail
It exchanged together with RIYA. It is well effective. Air-bleeding was serious on management of an off-road hose at the time of exchange. It is impossible although the portion fixed to a fork will be made to blow an attached rubber. It do
It exchanged together with RIYA.
It is well effective.
Air-bleeding was serious on management of an off-road hose at the time of exchange.
It is impossible although the portion fixed to a fork will be made to blow an attached rubber.
It does not enter.
A tape is rolled, and the hose was made thick and made to fix reluctantly.
View detail
It exchanged together with the front. It is well effective. A little, since attachment was longer than normal, it fixed the portion of the backlash by the swing arm using the cable tie.
It exchanged together with the front.
It is well effective.
A little, since attachment was longer than normal, it fixed the portion of the backlash by the swing arm using the cable tie.
View detail
![[Short Lever] Brake Master Cylinder Kit [Horizontal Type 11mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/43337_TS.jpg)
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Although seldom felt in exchange of only a mesh hose, when putting in the master cylinder, it changed fairly! It can be declared that it can say at a word, Effectiveness of a brake changed! It is very much satisfied.
Although seldom felt in exchange of only a mesh hose, when putting in the master cylinder, it changed fairly! It can be declared that it can say at a word, Effectiveness of a brake changed!
It is very much satisfied.
View detail
Since change of hoseline can be performed, it is convenient. Since it is a product made from a stainless, it is firm structure. However, I think that what is necessary is just to make a little at a low price.
Since change of hoseline can be performed, it is convenient.
Since it is a product made from a stainless, it is firm structure.
However, I think that what is necessary is just to make a little at a low price.
View detail
It attached to the nisshin master of KSR. I think that it will escape efficiently if air-bleeding is carried out by both the caliper side. Since it is blue, appearance is also good.
It attached to the nisshin master of KSR.
I think that it will escape efficiently if air-bleeding is carried out by both the caliper side.
Since it is blue, appearance is also good.
View detail
![[Short Lever] Brake Master Cylinder Kit [Horizontal Type 1/2" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/49017_TS.jpg)
Fits: YAMAHA Cygnus X SR, SUZUKI cobra, SUZUKI TS125R, SUZUKI TS200R, SUZUKI VX800, SUZUKI Across, YAMAHA RZ125, SUZUKI volty, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S, SUZUKI DR250R, SUZUKI DR-Z400SM, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI ZZR250, KAWASAKI Z400FX/Z400J, KAWASAKI Z250 (2013-)
It attached to NS-1. The exchanged reason is since an authentic positive one is poor, and because a pure master is breaking and a brake could not be easily effective. first, it exchanges and the good point seems easy [ extension of effective and a
It attached to NS-1.
The exchanged reason is since an authentic positive one is poor, and because a pure master is breaking and a brake could not be easily effective.
first, it exchanges and the good point seems easy [ extension of effective and a fluid ] also to - dress-up up to which effectiveness of - brake became markedly good -- the control at the time of - brake -- improvement (a pad --)
Since the mesh hose was exchanged for - point to which the affinity of a rotor may also be related, I think further that the merit of the touch also went up.
when the match of the front brake was played to the friend, it was able to win calmly!! but -- since it is amateurs' competition -- please ... call it a bad point or it is not so good -- time - Master -- it is only that there was no screw which fixes the thing.
Air-bleeding suffered troubles very much for the new article.
The uneasier one is to a motorcycle store. He bought it and it did not carry out loss.
A moped is strengthening of axle part, before raising Power....
View detail
Fits: HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR1000FVTR1000F FIRESTORM
The hose was also regarded as new to first half type VTR1000F for NISSIN radial brake master conversion, and it was made T2 type front brake hose kit. Management of a hose and die length were satisfactory at all by attaching a 90 邃?banjo adapter.
The hose was also regarded as new to first half type VTR1000F for NISSIN radial brake master conversion, and it was made T2 type front brake hose kit.
Management of a hose and die length were satisfactory at all by attaching a 90 邃?banjo adapter.
Since it united with the master as engine performance, it was not only a hose, but it changed to the touch of quite oneself liking.
View detail
![Semi Radial Brake Master Cylinder Kit [Angle Horizontal Φ19]](https://img.webike-cdn.net/catalogue/images/105373/62411_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
It attached to SV400S. Although effectiveness does not change that it is pure, when it is grasped and crowded, it becomes easy to control fairly. In case of radial one, although the semi-radial was used, it is satisfied with the thing that a brake
It attached to SV400S.
Although effectiveness does not change that it is pure, when it is grasped and crowded, it becomes easy to control fairly.
In case of radial one, although the semi-radial was used, it is satisfied with the thing that a brake hose interferes enough.
However, it is regrettable that the baffle has broken into having fastened with regulation torque.
Is it a thing whose reinforcement of an aluminum material is somewhat insufficient?
View detail
It becomes the brake made into the snap and there is sense of security. It is a low price, and since sushi appearance also changes, it is recommendation.
It becomes the brake made into the snap and there is sense of security.
It is a low price, and since sushi appearance also changes, it is recommendation.
View detail
There is only a product made from an antlion truly and it is the texture quality highest. I think wonderful ideas, because there is also freedom of choosing the thing suitable for its own motorcycle and a logo can opt for direction freely, since it ca
There is only a product made from an antlion truly and it is the texture quality highest.
I think wonderful ideas, because there is also freedom of choosing the thing suitable for its own motorcycle and a logo can opt for direction freely, since it can choose out of three colors.
Since it is a cap, attachment is also easy.
However, it only replaces with the original black lid.
However, although this thinks that larger Kapp's lid by the side of a brake is an exactly good price, the price as the brake side with same small lid by the side of a clutch cannot consent somehow.
But how about doing one's best somehow and getting [ the appearance of a motorcycle / are a fact, and ] becoming markedly beautiful?
View detail
worrying about a manufacturer, in order to change into an up handle from the handle of normal -- it is building at a design or a color -- the line was decided on. It is good that the fitting which is not, and a hose are [ Black and fitting ] stainless
worrying about a manufacturer, in order to change into an up handle from the handle of normal -- it is building at a design or a color -- the line was decided on.
It is good that the fitting which is not, and a hose are [ Black and fitting ] stainlesses.
He sometimes heard [ corrosion or ] that it breaks in case of aluminum.
Although 10-cm extension was carried out at the time of a we order, a charge is the touch made not to change.
When it attaches, it is a sporty shapely exactly to its image! The touch of the brake also became good having decided by the design.
It is good in only a few having a price already lowered.
View detail
It is a stainless color that appearance is not showy, either and ordinary. If a price is also handy and is made into a brembo, I will think that this is enough. Since it is a product made from a stainless, there are also no worries about rust.
It is a stainless color that appearance is not showy, either and ordinary.
If a price is also handy and is made into a brembo, I will think that this is enough.
Since it is a product made from a stainless, there are also no worries about rust.
Keep in mind that conformity changes by a brake hose manufacturer in the case of purchase.
View detail
Fits: SUZUKI GSX1100S
It attached to GSX1100S KATANA. It becomes possible to attach 4 pot caliper of a brembo to a pure disk rotor. There was also little error and the problem did not occur when attaching. Moreover, it is shaving, thing finishing is very beautiful,
It attached to GSX1100S KATANA.
It becomes possible to attach 4 pot caliper of a brembo to a pure disk rotor.
There was also little error and the problem did not occur when attaching.
Moreover, it is shaving, thing finishing is very beautiful, and surface texture is very good.
it is based on contact of a caliper and a rotor -- it pulls and Sim and a spacer are also attached for correction of a shearing error.
The explanation about handling of Sim was deficient in the sad thing, and when it attached and attached where, it was in the state which is not understood what location moves.
It moved, when the caliper had approached the right to the rotor, the caliper had approached the left to the rotor in the front fork side and the bolt by the side of a caliper was made to bite.
Change of a brake hose is also needed by attaching support and a new caliper.
It is dramatically light.
It is the same as Faulk's color, and is not too showy.
It was a product with appearance and compact and very sufficient user-friendliness.
View detail