Reviews
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
Don't leak.
Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment.
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis
Appropriate price and appropriate performance!
I bought it at a very cheap price There is not much difference from the original before break-in, but after break-in, it shows better braking power than the original. Diagonal scratches make it easy to dissipate heat and dust, providing consistent performance. View detail
Fits: TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KLX250SR, KAWASAKI KSR-1, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI KLE400, KAWASAKI KDX250SR, KAWASAKI KDX250R (for competition), KAWASAKI KDX220SR, KAWASAKI KDX220R (for competition), KAWASAKI KDX125/SR, KAWASAKI D Tracker 125, KAWASAKI D tracker, KAWASAKI 250TR, SUZUKI Address V100
Braking power up by 1SizeDown from OEMMASTER
The wife of the owner of the vehicle said that she was afraid of braking due to the 20-year-old OEM Master Cylinder, so we decided to replace the OEM MASTER Overhaul with this MASTER. I also wanted to increase the braking power by reducing the size from the Piston type, so I replaced it with the 11mm Piston type MASTER. (Quantity:Pair (for Left and Right) to 1/2-inches→11mm)
The smaller piston size of the Master Cylinder increases the braking force, but the amount of stroke increases, so a change of about 1 size is recommended.
The MAJESTYC I installed is my wife's Motorcycle, and she has a weak grip, so I had a request to make the Brake a little lighter.
The touch was good, and together with the 20 year old Brake hose, which was also changed to Stainless mesh, the Brake looks very nice.
My wife was relieved to hear that it was easier for her to ride as well.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Good looks
I bought a new GSX250R and replaced the tank with a new one, not because there was anything wrong with it, but because I wanted it to look good. I thought it would be cool if the tank was made Radial style. As others have said, when I tried to install the tank, the tank was a little askew and the position of the tank bracket was not quite right. I was disappointed in this point. The installation was easy. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA DIO system, HONDA GYRO type(2Cycle), YAMAHA MAJESTY125, YAMAHA VINO, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOGZ, YAMAHA JOG Z, YAMAHA JOG90, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA APRIO, YAMAHA AXIS 90, YAMAHA BWS125(BWS), YAMAHA BWS100(BWS)
Beautiful color.
It is ideal for dress-up of GYROX's Rear brake. View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Also for Restore of older vehicles.
[How is it used?
I acquired this product as part of the Restore process when I reached middle age, having acquired the vehicle of my dreams that I was unable to obtain during my Blue Spring days, "Run" "Bend" "Stop" The most important of the "Stop" Focusing on NISSIN for Peace of Mind In
Was the one you received as per Image?
It was the equipment that was equipped with Large body on the vehicle that I admired in the Racer replica era from the late 1980's. It was a product just like Image, and I am thankful for the age when we can easily purchase products with higher performance than those days at Motorcycle accessory stores and Webike.
How did it compare to other products?
The comparison was a longing for those of our generation. "Brembo" When YamahaOEM Product It was
Since then, brembo products have become easier to obtain and there is a wider selection of brembo products compared to Nisshin products. Very expensive."
And OEM Product, when I was allowed to test drive a friend's vehicle at that time. It doesn't work very well." I also have a feeling that it would be better to stick with the OEM, which I have always felt was the best way to go. And, above all, it is impossible to get new parts for the 1987 Motorcycle because the manufacturer has stopped selling them.
It's not that we don't have overhaul kits, but it's just not worth the time, effort, and money for something that doesn't work as well as it should...
in the manner of Works great." Affordable prices." Brand for Peace of Mind." The Nisshin brand is the best choice.
[Points to note]
Please check the compatibility with the Brake Caliper and the standard before purchasing.
When installing, be sure to connect and bleed the brake fluid properly, and be sure to install and maintain the brake troublemaker properly, as it can kill you and others.
[Included Parts:were they on?
All images attached on Webike's Site.
[Was there anything that disappointed you?
Nothing at all, so much so that I don't think it should be compared to the OEM time with Caliper. It works as well as it should." They will give it to you, and you will never go back to NORMAL again.
0Other items that may be useful include
Point and hang of installation
Both point and hang. We make sure each task is done right." It is important to
After temporarily assembling this product in the handlebar and aligning the position balance with the lever on the clutch side, firmly install the brake hose and brake caliper to prevent leakage, and be sure to bleed air from the brake fluid.
[ITEMS TO BUY TOGETHER
Let's replace the Brake hose, Caliper, and Pad.
Even if it is a Large kesa, at the very least, you should have new Brake fluid and hose connection washertc.
[Opinions and requests to Manufacturer
More and more people are restoring various old cars on SNS and YouTubeetc. video sites.
I have a feeling that demand will continue to increase in the coming years, and I look forward to the continuation of Lineup for many years to come.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Installed on SKYWAVE250 burgman (CJ43A)
The front master cylinder is deteriorating and I bought it instead of OH.
It has bolt holes for mirrors (with Reserver tank), so it may not be suitable for Cowl mirror cars.
It is more like an OEMSpec. ready-made product sold in Rose than aftermarket parts, and the prices are reasonable.
It is made by NISSIN, a trusted manufacturer, so people who do not want to use cheap Chinese products can rest assured.
Since it is basically an OEMSpec, there is no difference in feel between NORMAL and LARGE, and it is a kind of dress-up parts, but it comes with an adjust lever as a byproduct.
View detail
Fits: YAMAHA Remote control jog, YAMAHA Grand Axis, YAMAHA JOG 50, YAMAHA Jog 90, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA Super Jog ZR, YAMAHA Jog Aprio Type 2, YAMAHA JOG 50, YAMAHA Jog 90, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA Super Jog ZR, YAMAHA Jog Aprio Type 2
จานดิส สวยงาม คุณภาพดี View detail
Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA XT250X, YAMAHA WR250, YAMAHA TW200, YAMAHA TW225, YAMAHA JOG90
Recommendation to dress-up around Handlebar
[How is it used?
Installed on a PCX125JF56. the brake master cylinder cap had deteriorated considerably and was very dirty, so I decided to buy this product which can dress-up the cap.
Was the one you received as per Image?
I am very satisfied with the product, the texture and appearance are better than I expected.
Was the installation difficult?
It's easy, just remove the OEM brake master cylinder cap and put it in the same position. I used the supplied bolt to secure it in place.
How was your experience with it?
I am glad I changed it because it is a One Point around the Handlebar and the Tension goes up every time I drive. It is a little Custom, but I think the quality is very good for this price.
[Included Parts:were they on?
It contains an attached fixing Bolt.
The OEM bolt can be removed with a Phillips screwdriver, but I think the supplied special bolt is hexagonal.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith)
Is good
Very stable, good product. View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
"cool
Cool, but the O-ring is thick and deforms when tightened.
Oil oozes, although it is not clear if that is the reason or not.
View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
I like the colored GuardCover.
Install the diaphragm so that it does not bite, but this is not particularly difficult. Since the installation is changed from a cross screw to a hexagonal screw, be sure to install with the proper torque so as not to overtighten.
I was a little concerned about the fact that it says "Made in Taiwan" and "Parenthesis" on the lid.
I have been using it for over a month now and have had no problems with it.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Looks cool!
The quality is better than the price, and I have driven 2000 km since installation and have not experienced any problems.
Breaking is not a problem, and I think the rigidity is sufficient.
I would recommend this product to everyone.
View detail
Fits: YAMAHA XV250 Virago, YAMAHA XV250, YAMAHA YF80M, YAMAHA YBR125K, YAMAHA YBR125K, YAMAHA YBR125K, YAMAHA YBR125K, YAMAHA YBR125ED, YAMAHA YBR125ED, YAMAHA YBR125E, YAMAHA YBR125E, YAMAHA XVS125 Dragstar, YAMAHA TW200E Trailway, YAMAHA TZR125, YAMAHA TW200 Trailway, YAMAHA TT225, YAMAHA T90N News Mate, YAMAHA T90N News Mate, YAMAHA TT-R230, YAMAHA TT-R225
Buy to try it out
I bought it to try it out. I am going to install it now. View detail
Fits: YAMAHA Jog Z, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA JOG90
Cost-effective
For an outside company, it is made to be safe. View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
DAYTONA NISSIN Brake master cylinder kit
Used on ADDRESS V100, selected as replacement parts due to OEMMASTER Fluid leak.
I also found a guarantee of conformity on Webike with the size for the Handlebar diameter of φ22.2, but the Handlebar side was thinner.
The diameter of the handlebar was adjusted by wrapping tape around the handlebar side, or by inserting a spacer.
When used on an old Scooteretc., it interferes with the light cowletc., so it may be necessary to cut the cowl or make it into a bar handle, etc.
I am satisfied with the product as it has made it easier to Control Brake.
View detail
Fits: YAMAHA XV250 Virago, YAMAHA XV250, YAMAHA YF80M, YAMAHA YBR125K, YAMAHA YBR125K, YAMAHA YBR125K, YAMAHA YBR125K, YAMAHA YBR125ED, YAMAHA YBR125ED, YAMAHA YBR125E, YAMAHA YBR125E, YAMAHA XVS125 Dragstar, YAMAHA TW200E Trailway, YAMAHA TZR125, YAMAHA TW200 Trailway, YAMAHA TT225, YAMAHA T90N News Mate, YAMAHA T90N News Mate, YAMAHA TT-R230, YAMAHA TT-R225
Vesrah Brake Shoe Great Product & The Price
I REALLY LOVE THIS VESRAH BRAKE SHOE SET. I HAVE BEEN USED THIS BRAKE SHOE SET FROM EARLY 2014 TO MID 2018 .Still 2.9mm left on the shoe.It has the ability ,very good stopping power especially in wet condition.Some say vesrah brake shoe exceed the OEM QUALITY. I can say that too .No need to worry about the quality ,Brake Shoe Doesn't wear very quickly because it's MADE IN JAPAN. Once I Put Vesrah Brake Shoe in, I can able to ride my bike with confident.vesrah brake shoe just a little bit pricey than OEM brake shoe kit. If I compare OEM vs VESRAH BRAKE SHOE , both products are excellent.I coudn't able to find vesrah brake shoe kit in mid 2018. So I put Brand New OEM SHOE KIT ON THE FRONT WHEEL. NOW WE ARE IN LATE 2022.Almost 20000 kms have been driven since putting new oem brake shoes.Two or three days ago I checked the front wheel brake shoes.I've noticed that the OEM brake shoe has worn approximately 1mm.When we replace a new brake shoe, the thickness of the shoe is approximately 4mm. With use, it gradually becomes less. In cases where the thickness of the brake shoe is 2mm or less, the brake shoe should be changed.Some riders complain about the brake shoe squeal & make noises when the brake lever pull in.This can happen due to not properly maintaining the brake hub and brake shoe.If the brake hub and shoe are checked and maintained well at least once every three to four months.it is possible to stop the wheels very easily & will eliminates any squealing noise..I love shopping at webike because they have everything I wanted.Price is so cheap than the other online shop.The package received in a good condition and nicely packed.Thanks For The High Quality Packaging.Nice Online Shopping Experience.Very Happy Coustomer .Highly Recommended.I found two stickers this time.has webike logo on the front ,says '' we love motorcycles and riders'' I'm gonna put that decals on my bike. Thank You So Much WEBIKE. View detail
Fits: YAMAHA JOG, YAMAHA JOG, HONDA BENLY50S, HONDA DIO system, YAMAHA AXIS 90, YAMAHA APRIO, HONDA MONKEY, HONDA SUPER CUB 90, HONDA ZOOMER, HONDA DAX, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA GORILLA, YAMAHA CYGNUS X, YAMAHA JOG90, YAMAHA SUPER JOG ZR, YAMAHA VINO, YAMAHA MAJESTY125, YAMAHA JOGZ, YAMAHA SUPER JOG
good
[How is it used?
To the One point of the suspension
Was the one you received as per Image?
It was a beautiful color.
Was the installation difficult?
Easy
How was your experience with it?
OEMs have a hard time without the use of tools.
This makes it easy to turn by hand and adjust the Brake
It was much easier.
Custom feel as it can be the one point of suspension.
Fashion.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA VTR-F, HONDA GROM, HONDA NSR80, HONDA NSR50, HONDA NS-1, KAWASAKI D Tracker, KAWASAKI NINJA250R, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KSR-1, KAWASAKI KLX300, KAWASAKI KLX250
PetitAttachment Good cost performance
I think this is a great product for a little pre-Attachment.
The work can be easily done by simply installing Screw.
I put it on in a way that matches the color of the BIKE I ride.
View detail
Fits: HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA VTR-F, HONDA GROM, HONDA NSR80, HONDA NSR50, HONDA NS-1, KAWASAKI D Tracker, KAWASAKI NINJA250R, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KSR-1, KAWASAKI KLX300, KAWASAKI KLX250
PetitCustom with good cost performance
Basically I like NORMAL, but as a PetitCustom it's inexpensive and a little Fashion!
It's easy to work with, just replace Screw with Hexagonal Wrench.
Highly recommended!
View detail