Reviews
haughty
I used it in RCS and had about half left over.
Unlike Company B's KRear hose, it is not translucent but beautifully transparent.
Flexibility is not good, and the inside dents when bending.
I heard that if you bend it through another Tube and put it in boiling water, it bends well.
I don't know how durable it will be in long-term use, but so far it hasn't sweated.
View detail
It's neither good nor bad
I bought this product when I changed from OEM Clutch master to Brembo master. It is a necessary item and it has been about 6 months since I installed it and so far the Fluid visibility is good and I can use it normally. The installation is not particularly difficult. I would like to customize the Bracket and Cap in the future since they are always visible parts. View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG
It is installed on a zrx1200ZrX1200 DAEG.
Purchased this to install a brembo Caliper. I think the product is solid, looks good and is quite accurate. I decided to buy it because the price is lower than other manufacturers. I am satisfied with Large. View detail
Thailand Gong Tube!
This corrosion, weather, chemical, and abrasion resistant tube is similar to a regular silicone gumTube, but is completely different.
I think the Gold amount is also about 8 times different.
But I know of only one such chemical-resistant, transparent Tube, Thailand Gon.
The fact that it is used in medical institutions, research facilities, and petrochemical combinators is testimony to its superior performance.
View detail
Made by TYGON, after all!
TYGON Tube is used in the medical field and is known for its resistance to chemicals and impurities that do not dissolve into the bloodstream, as well as for its ability to generate altered gases in the flowing fluid that do not dissolve. and not dissolve into the flowing fluid.
The TYGON is a reliable product, and it's great that it's not affected by brake fluid glycols. The transparent design makes it easy to see when the air bites, and allows you to visually check the air removal process.
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr] RS, KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
Good Product
This kit is beautifully machined and fits perfect. All bolts, bearings,washers and nuts are included. It only took about 10 minutes to install View detail
Tank set
I bought a Clutch lever, but I did not know what to buy other parts, but I found this Tank set so I bought it. Installation itself is easy, but adjustment of the length of Hose is necessary. View detail
Fits: KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr].
Although attached with 230 mm of SUNSTARs DISC, it shifts outside about 8 mm and the Pat does not suit a DISC.A Caliper support is too long although the thing for ZEPHYR750s was purchased.Although the Torque rod also puts color into the position of a
Although attached with 230 mm of SUNSTARs DISC, it shifts outside about 8 mm and the Pat does not suit a DISC.A Caliper support is too long although the thing for ZEPHYR750s was purchased.Although the
Torque rod also puts color into the position of a Center stand and has written it to be attachment straightly, it will not become straight if it attaches to the position as a description.What was necessary was just to have used
SPEC...
View detail
[Webike Monitor] It purchased at the time of brembo RCS Clutch-master wearing. All of the Master tank, a Hose, a Hose clip, and a Tank stay have gathered, and it is safe. Brembo S15 A and a Hose are the same products as Cau Ken's Mesh type,
[Webike Monitor] It purchased at the time of
brembo RCS Clutch-master wearing.
All of the
Master tank, a Hose, a Hose clip, and a Tank stay have gathered, and it is safe.
Brembo S15 A
and a Hose are the same products as Cau Ken's Mesh type, and
and a Tank have die length also with just right die length.
A Bolt and color are contained and
and a Tank stay also have easy attachment.
It is somewhat more profitable than purchasing with a Rose for
and a Set.
-- safe and the optimal above all -- a Starter kit is carried out and it is an excellent product.
They are the necessaries of Clutch-master attachment of the
brembo, and a Recommendation.
View detail
Fits: KAWASAKI ZZR1100D, KAWASAKI ZZR1100D
which does not have problems, such as making an inexpensive point, somewhat compared with other Manufacturers -- -- it is hard to hear that it does not step on strongly
which does not have problems, such as making an inexpensive point
, somewhat compared with other Manufacturers -- -- it is hard to hear that it does not step on strongly
View detail
Fits: KAWASAKI GPZ900R NINJA [Ninja] A7-, KAWASAKI GPZ900R NINJA [Ninja] A7-
Although master cylinder exchange is recommended, I am using normal. as a result, it is satisfactory -- it is -- !. it is easy to control although effect is slightly sweeter than normal -- it comes out, and it is peevish and ! appearance is the highes
Although master cylinder exchange is recommended, I am using normal.
as a result, it is satisfactory -- it is -- !. it is easy to control although effect is slightly sweeter than normal -- it comes out, and it is peevish and ! appearance is the highest!
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr] RS, KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
The STD wheel and the STD brake rotor were also able to be attached. Although effect is sweet touch, it is rather good for me well using a rear brake at a soft touch.
The STD wheel and the STD brake rotor were also able to be attached.
Although effect is sweet touch, it is rather good for me well using a rear brake at a soft touch.
View detail
Although it is used in combination with the radial master of a brembo, since it interfered in the cowl and a handle did not go out when it was an angle of stay as it is, it is bent and used. Then, it being very pleasing is being able to bend finely.
Although it is used in combination with the radial master of a brembo, since it interfered in the cowl and a handle did not go out when it was an angle of stay as it is, it is bent and used.
Then, it being very pleasing is being able to bend finely.
It was able to bend with nature to the extent that it did not give bending.
The degree of freedom of the neighborhood about there is important for products in general! Too!
View detail
For attaching RAJIPON of a brembo to naked vehicles, mirror holders are indispensable items ... although he wanted to use an antlion, the mounting hole of a reservoir tank differs in level aplomb, and does not suit -- since like -- works -- although M
For attaching RAJIPON of a brembo to naked vehicles, mirror holders are indispensable items ...
although he wanted to use an antlion, the mounting hole of a reservoir tank differs in level aplomb, and does not suit -- since like -- works -- although Mr. Quality's thing was used, since the components containing the brembo logo of the handle attachment part of RAJIPON must be transposed to this, I am sad.
It is that the thing in which the logo of the brembo is contained with much trouble must be removed ....
And this color ...
Brown .. Why!? I want you to make not the color of stay but the color of a mirror holder main part choose. However, functionally with no problem.
If it dares to complain in a function surface, it will change that the installed height of a mirror is pure.
I wanted consideration at the point.
Or [ it makes lowness and can be made to carry out color (spacer) adjustment ].
Therefore, two stars.
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr] RS, KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
It becomes easy to carry out control at the time of breaking. Although it is easy to make line correction in a cornering, etc., it also feels like [ as opposite side effectiveness having become sweet ].
It becomes easy to carry out control at the time of breaking.
Although it is easy to make line correction in a cornering, etc., it also feels like [ as opposite side effectiveness having become sweet ].
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr] RS, KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
This is good. Although he steps on RIA too much and acted as Locke very well in many cases, this reduced it very much. Therefore, an inquiry of a corner came to put in comfortably. Attachment is pleasing although it was trouble (processing of
This is good.
Although he steps on RIA too much and acted as Locke very well in many cases, this reduced it very much.
Therefore, an inquiry of a corner came to put in comfortably.
Attachment is pleasing although it was trouble (processing of the color of a wheel, etc.)!
View detail
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch. A tool and stay interfere in a design frequent also as means in the case of air-bleeding. If this point is improvable, I will think that it is better.
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch.
A tool and stay interfere in a design frequent also as means in the case of air-bleeding.
If this point is improvable, I will think that it is better.
View detail
Although a design is good, the stay by the side of a clutch cannot perform air-bleeding in a master side, after fixing. (A ZZR1100D normal handle, tank level fixation) If it carries out by force, a crack will go into a master and stay. Moreover, w
Although a design is good, the stay by the side of a clutch cannot perform air-bleeding in a master side, after fixing.
(A ZZR1100D normal handle, tank level fixation) If it carries out by force, a crack will go into a master and stay.
Moreover, while the surface mesh is touching the attached hose, it will become white.
He exchanged for the brembo pure rubber tube and the hose clamp.
Although it was interference at the time of operation, also when a full stare was carried out, by our ZZR1100D normal handle, it did not interfere in a cowl.
If step is kept also with a brake clutch although it is cheap, he is smart and there is a hand of stay its original work, and isn't there such any selection, either?
View detail