Reviews
For the company's Oval silencer
I was asked by an acquaintance of mine who rides a ZrX1200 DAEG to purchase one on his behalf.
It seems that we got a DiabloOval silencer from K-Factory, so we decided to use this bracket, which is almost exclusive for this bracket, because the normal tandem/exhaust bracket would not fit.
Of course, I was satisfied with both the angle and length of the angle and the length of the length of the length of the length of the length.
However, Material:I know that Titanium is a good product, but it is expensive to spend more than 20,000….
View detail
Can also be used with OEMExhaust System
The photo is in Black, but please keep in mind that the Lineup is only Silver at the time of posting the Impreza.
The only color available was Silver, and I wanted Black to match the Frame, so I made the following inquiry to OVER.
Q.Are there any plans to manufacture Black
→A. None.
Q.Is it possible to make a special order for Black?
→A. Acceptable at the time of remanufacturing after the current stock is paid out, but the timing is undecided due to the large current stock.
At the end of the exchange, I was referred to ReAnodized Treatment to Coken, which I used.
The cost at my time was 10,000 yen.
If you do not tandem and do not use a loading hook, you can lighten the weight somewhat by replacing the hook.
The OEM Exhaust System can be used, and of course the OVER Exhaust System can be used, but the OVER Swing Arm is a little thicker and the clearance is not so good, so we added an extra 4mm to the collar that comes with the OVER Exhaust System. The OVER Exhaust System can of course be used with the OVER Exhaust System.
The screw threads of the Bolt for fastening the Exhaust System with Bracket remain more than 1cm, so if you are concerned about it, you may procure just the right length yourself.
When fastening the Tandem Footpeg to the Frame, it is recommended to apply a medium-strength screw lock agent.
View detail
I still don't know how to install it!
I opened the box to install the product and read the Instruction Manual, but there was no description of how to install the product, and even after searching on YouTube, I could not find anything.
Therefore, it still remains unattached. ( ；∀；)
I would be happy if someone could comment if they can figure it out.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
I made a mistake but …
The product itself is a Simple Design, but it is solid, easy to install, and very good.
My own evaluation is that it is different from other Parts by Manufacturer, and I am replacing it with a new one.
View detail
Subtle…
I used it with SP Tadao's Exhaust System. For some reason, it went inside the Tandem Footpeg and interfered with the Swing Arm, so I used a 20mm Spacer to let it go outside. View detail
daytonma Exhaust Bracket For Right
About quality and texture I think the quality is really good About the feeling of use Incorrect length measurement but fitted to exhaust clamp bolts. Products to buy together An exhaust clamp with m10 bolts is required Difficulty of installation easy, simple Cost performance and comparison with other products I think the product is the best for the company that makes the exhaust, but I think it is a well-made product in various ways About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing We need to measure the length properly and choose I needed 150mm, but I chose 175mm, but 125mm was the correct answer View detail
![Exhaust Hanger [Exhaust Bracket]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0164/22636930_1_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
It does not fit the current model.
It does not fit the current z1000.
Since it's an external exhaust system, I'll bend the bracket a little bit and use the Spacer that's sold at Home Center to get clearance between the Silencer and Swing Arm.
View detail
![[Exhaust Repair Parts] Cushion Rubber](https://img.webike-cdn.net/catalogue/images/39183/18935-L41A6-01_TS.jpg)
Is it supposed to be OEM?
I bought the Exhaust System used and needed a Pad.
However, when I tried to install it, the rubber part was cracked…
It was subtle…
Size is perfect.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Dress-up and a little weight reduction
Although I hooked Single Seat+LeftTandem, only Right Tandem Footpeg was still attached due to Exhaust Bracket.
I chose this one because I was looking for something rigid that I can install AKRAPOVICJMCA and has Slide adjustment.
It was a gamble to see if I could install it. (Lol) As a result, although the front and rear of the car body can be slid, the mounting position is offset to the outside of the car body, so it is not possible to attach the pons...
I made my own Bracket. It is installed. It became the form which pushes up a little.
The adjuster for the rear suspension was also fixed to the Tandem, but this bracket also needed to be modified to make the slide as large as possible.
The texture is high quality and satisfactory workmanship. If it is this finish, there seems to be a sense of existence with a sense of luxury even in Black. However, I think that Wound is easy to stick a little, and Wound a little by adjusting the installation position. It is a work with care...
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
good-looking
R25 has few Exhaust Bracket, so I decided to use OVER one.
If it's an OEM Bracket Exhaust System, it will have a Large body.
View detail
Fits: DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 1200 S
Tandem Footpeg Removal
I don't do Tandem, so this is a purchase for Tandem Footpeg removal.
Material:It's Stainless Steel so it's heavier than it looks but the footpeg removal works great.
View detail
MONKEY Exhaust SystemExtension Bracket
If it is produced with an emphasis on appearance, it is a little disappointing.
The Hexagon Bolt comes out of the Large Exhaust Bracket.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Exhaust Bracket
I bought it because I removed the Tandem Footpeg.
The installation was done by Yoshimura, but even the OEM unit comes with no problem.
View detail
Fits: BMW S1000R, BMW S1000 RR, BMW S1000 RR
Used in S1000RR 2017
I installed this on the S1000RR 2017. I installed this Bracket after replacing it with an AXIS Lapovic Racing lineFull Exhaust System. View detail
A little more texture
Purchased as an option for Slip-on Silencer:It's aluminum but has a matte finish The mounting bolts are OEM reusable I wish the mounting bolts were included in the kit View detail
The accuracy is not good - - -
I installed it together with the Exhaust System replacement.
I thought after receiving it at hand - - - heavy - - -
Because it is made of iron, it is heavy. And rust is made of iron.
A little rust came out from a bald part of the paint so I upgraded it.
It is processed by Logo Moto's Logo, but did you cut out with Hanger, Jigsaw or something in the first place?
BALI remains or marks cut out in the section of the cut surface remain.
Well, as it does not affect the function, honestly I do not need anything else.
Is this neighborhood ItalyQuality?. I do not care about the function, so it seems like a good idea - - -
Foreigners will hear that even if Wound enters the car's Bumper, they will not handle Wound,
To be honest, what is unique about the sensitivity of Japanese people.
I decided not to do Tandem so I can fulfill the function as Exhaust System Hanger.
However, if you also remove the footpeg of Left Side and the Right Side is attaching a heavier Hanger than footpeg, Quantity : Pair (for Left and Right) With regard to GSX - R 750 k 8 - L 0, I think that Balance of weight will change, and the other suitable Hanger is about RG.
Well I got cheap, so I complain luxuriously - - -
In general, is not it bad but is not it good.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
The finish is Beauty
Beauty by Polished.
It is fun to polish.
Material : It is quite lightweight because it is Aluminum.
I just want you to manage the price.
I feel a bit high.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although it has mistaken, and it purchased by the Normal exhaust pipe and is not used, welding of the STAINLESS STEEL is craftsman work.
Although it has mistaken, and it purchased by the Normal exhaust pipe and is not used, welding of the
STAINLESS STEEL is craftsman work.
View detail