Reviews
Good quality at an affordable price.
It is a low-priced but high quality product and comes with Bolt and other accessories, making it a highly satisfactory product. View detail
Stylish
IKAZUCHIExhaust System and Quantity for CBR250RR:I attached it as a set, but it is better to prepare only the collar because a collar is needed between the bracket and the exhaust system. View detail
Can also be used with OEMExhaust System
The photo is in Black, but please keep in mind that the Lineup is only Silver at the time of posting the Impreza.
The only color available was Silver, and I wanted Black to match the Frame, so I made the following inquiry to OVER.
Q.Are there any plans to manufacture Black
→A. None.
Q.Is it possible to make a special order for Black?
→A. Acceptable at the time of remanufacturing after the current stock is paid out, but the timing is undecided due to the large current stock.
At the end of the exchange, I was referred to ReAnodized Treatment to Coken, which I used.
The cost at my time was 10,000 yen.
If you do not tandem and do not use a loading hook, you can lighten the weight somewhat by replacing the hook.
The OEM Exhaust System can be used, and of course the OVER Exhaust System can be used, but the OVER Swing Arm is a little thicker and the clearance is not so good, so we added an extra 4mm to the collar that comes with the OVER Exhaust System. The OVER Exhaust System can of course be used with the OVER Exhaust System.
The screw threads of the Bolt for fastening the Exhaust System with Bracket remain more than 1cm, so if you are concerned about it, you may procure just the right length yourself.
When fastening the Tandem Footpeg to the Frame, it is recommended to apply a medium-strength screw lock agent.
View detail
Sleek, Sharp & Cool Bracket
I was thinking of getting silver bracket initially, but changed my mind to black since i purchased a black racing hook. I am so happy i made the choice to change color. The black is really cool; its not shining & matte. really make my bike look more classy and sharp. the over racing logo is carved, meaning it will not fade! i used it with akrapovic exhaust & exhaust protector. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
I made a mistake but …
The product itself is a Simple Design, but it is solid, easy to install, and very good.
My own evaluation is that it is different from other Parts by Manufacturer, and I am replacing it with a new one.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Used as Exhaust Bracket
I could not find an exhaust bracket of the shape I liked and this product was just like the Image, so I bought it.
Only the footpeg can be removed and used as an exhaust bracket.
But Quantity:Pair (for Left and Right) The only one is a left side, and the left side is not attached, so it's useless ….
I wanted it to be sold only on the Right Side.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Tandem FootpegBracket
With the change of the spec., we have the same manufacturer's OVER tandem stay as the Rear Sets!
Replacing the body is easy:just remove the bolt and replace it, and since the tandem footpeg is an OEM replacement, you can simply reattach it as if it was already installed. The angle of the footpeg can be adjusted, but since it is mostly for one rider, I didn't worry too much and tightened it up.
View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Race ish feeling Up!
Exhaust system is Trickster's Slip-on Silencer, but the bracket was originally installed at the NORMAL position, so it fits perfectly. View detail
Subtle…
I used it with SP Tadao's Exhaust System. For some reason, it went inside the Tandem Footpeg and interfered with the Swing Arm, so I used a 20mm Spacer to let it go outside. View detail
Tandem Footpeg removed and replaced
It was replaced together with Exhaust System replacement.
I am satisfied with the lighter weight than OEM Product.
View detail
To convert to Single Seat
Tandem footpeg is removed and installed for single seat conversion.
Black for a clean look around the Rear
View detail
It may be a little incompatible with YOSHIMURA's Exhaust System.
I purchased an Exhaust Bracket for my cbr250rr YOSHIMURAR11 CYCLONE. I bought an exhaust bracket for my cbr250rr yoshimurar11 cyclone. If the bracket that connects the Slip-on Silencer to the Exhaust Bracket can be slightly shaved, the quantity:2pc. I am very happy to have the Screw in one hole as it is not the Exhaust Bracket from YOSHIMURA. I have been using it for about a month now and so far it works fine. The design of the product is cool and very stylish on the tail side, and I think it has a great dress-up effect! The price is a little bit high, but it's a … View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Wow that's cool
It's cool!
Recommendation!
By all means.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Suitable for Circuit driving
I use YOSHIMURA's R11, but since YOSHIMURA's Exhaust Bracket has been discontinued, I bought and used Over's one.
Since it says in the product details that the OEM Exhaust System is also compatible, I thought it could be used on the YOSHIMURAR11, which is fixed in the same position as the OEM, and the result was that it was successfully attached.
Since I use the Exhaust System for circuit driving, the collar connecting the Exhaust System to the Exhaust Bracket is a bit of an obstacle for hang-offs. Therefore, unlike the Instruction Manual, I put the collar on the inside of the exhaust bracket, although it is a bit unreasonable.
View detail
It's not just about looks…
I don't tandem, so I removed the tandem footpegs on both sides and installed this one.
The product itself is also cool, but without Step, the Rear has become Refreshing.
Plus, the weight savings will be there!
View detail
Fits a CB500F Perfectly!
Very nicely made and anodising is uniform. Handsom on the bike and cleans up the rear foot peg superbly. Nice little bit of weight savings too! View detail
Practical choice for texture!
After I modified the exhaust pipe, because of the angle of the modified exhaust pipe, the rear pedal bracket had to be changed and raised. But in this way, the ride comfort of the back seat becomes worse. The rear pedal bracket of this OVER RACING has the same screw holes as the original bracket, but the pedal position has to be expanded. Therefore, it is possible to slightly improve the ride comfort of the rear seat while keeping the high exhaust angle unchanged. Very good! But it should be noted that in order to install this set of brackets, the bracket adapter code equipped with my R'S gear exhaust pipe needs to be polished partly! -------------------------------------------------- -------- After I changed the exhaust pipe, because the reasons for the angle of the exhaust pipe, the post-pedal bracket had to change the angle to do raise treatment. But in this way, the ride comfort of the rear seat became poor. The back pedal bracket of this Over Racing is the same as the screws of the original bracket, but the foot is more expanded. Therefore, it can be slightly improving the ride comfort of the rear seat while maintaining the high angle of exhaust gas. However, it should be noted that in order to install this set of brackets, my R's GEAR exhaust pipe is equipped with the bracket transfer code needs to be partized! View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
good-looking
R25 has few Exhaust Bracket, so I decided to use OVER one.
If it's an OEM Bracket Exhaust System, it will have a Large body.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
I only wanted Right.
I used it as Exhaust Bracket without footpeg, I only needed Right, so it is not cosmetic.
The design is good, but the dimples on the valley side of the bent part are noticeable depending on how the light hits it, which is a little disappointing.
Weight is 530g OEM/290g Product (without Step) (Right only comparison)
The unused footpeg mounting hole is not cool, so I plan to plug the cosmetic bolt.
View detail
z900rs&over racing
z900rs has changed the over racing family, the separation handle, and the rear seat pedals, workmanship and appearance are all high-quality, I hope the over family will produce some z900rs modified small parts, such as the frame hole cover, the front fork adjustment button, and so on! I have bought a lot of things at webike, and I know a lot of car friends who buy modified parts at webike. I hope that webike will continue to work hard and offer more discounts! come on! z900rs changed the over racing family, the separation handle, and the rear seat pedals, workmanship and appearance are all of high quality, I hope the over family will produce some z900rs modified small parts, such as the frame hole cover, the front fork adjustment button and so on! I have bought a lot of things at webike, and I know a lot of car friends who buy modified parts on webike. I hope that webike will continue to work hard and offer more discounts! Come on! translated by Google Translator View detail