Reviews
Appearance Refreshing
I was looking for a bracket for a while to remove the OEM footpeg, but I bought this one. The position of the exhaust bracket is slightly offset from the OEM position. View detail
Design is good
Simple and can be mounted to allow for subtle orientation and positional modifications. Good. View detail
Stylish
IKAZUCHIExhaust System and Quantity for CBR250RR:I attached it as a set, but it is better to prepare only the collar because a collar is needed between the bracket and the exhaust system. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Nice look
I painted it a low gloss black. I installed the bracket without the provided spacers. This pulled the bracket in 12mm so touching it with my right heal isn't as annoying when my toes are one the peg. This bracket does send a minor vibration through to the handle bars as the muffler moves about on rough roads. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE
have one's feet hit against the ground (e.g. when someone's foot is on the ground)
I had been using a Fixed Type Bracket from the same manufacturer, but my feet were hitting it, so I replaced it with a Slide Type Bracket.
I had to use a bracket on the Fixed Type because the angle was not right, but here I was able to attach it directly.
However, even with this product, the Step work itself is possible, so it continues to be used, although it hits slightly.
YOSHIMURARear Sets to stand around the ball of the thumb, the foot is 27cm and in the photo.
The design and texture are good, but the included Bolt for the Exhaust Band looked like it was floating in Silver when it was Black, so I replaced it with Universal's BlackBolt.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Diversion to Trickster
Good design and used with TricksterFull Exhaust System.
The holes were not aligned with those of Trickster, so a bracket with 40mm between holes was used.
The weight is about 260g, which is lighter than the OEMfootpeg, which weighs about 500g.
I feel the logo is too assertive, so Plain would have been even better.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000
Conformity with EK1AA in 2021
I bought this to try to see if it would fit a 2021 EK1AA, YOSHIMURAR-11Sq.
I was able to install it, but still couldn't get it to pontoon.
Since the installation holes on the Exhaust System side were 10mm off from the installation holes on the Exhaust System side, the installation holes on the Exhaust System side were modified to long holes and installed.
Also, I wish there was a BlackAnodized Color as well as Silver. I can't help but feel that this Bracket is the only one that floats above the rest.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Used as Exhaust Bracket
I could not find an exhaust bracket of the shape I liked and this product was just like the Image, so I bought it.
Only the footpeg can be removed and used as an exhaust bracket.
But Quantity:Pair (for Left and Right) The only one is a left side, and the left side is not attached, so it's useless ….
I wanted it to be sold only on the Right Side.
View detail
![[Repair / Optional Parts] Silencer Bracket](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0251/24232620_1_TS.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Mounted on NORMALAXIS Lapo
I installed it on my OEM exhaust system because it was listed as "All CBRExhaust Systems" and I had no problem with fitting. The weight was reduced by about 160g. View detail
The quality of workmanship is made by Minimoto.
Mounting orientation (Quantity:Pair (for Left and Right) I purchased the wrong Bracket (I bought it by mistake and only temporarily installed it), and my impression is that the quality and workmanship is better than other manufacturers' Brackets, especially the welded parts are beautifully finished.
The offset value did not match my Exhaust System&iron CUB, so I had to buy another company's bracket.
The M8 screws cut into the mounting holes on the exhaust system side are also unique to other companies' products, and the stainless steel's high quality and SMART appearance make it number one.
View detail
Quality is outstanding, but the stuffing is...
It is cohesive when used with Single Seat.
The key is that the Single Seat in M3 color is not yet available, but...
Black Anodized, Beauty, Yoshimura logo are the best without BALI, but
The important thing is that the mounting Bolt, Washer and Nut with Silencer are Stainless Steel SilverUniversal Product!
It is a pity that the silver bolts seem to stand out a little from the black color scheme, but that is a matter of personal preference.
The bolt and nut have been changed to Stainless Steel Black.
View detail
It's pretty good!
It is very lightweight and beautifully made, but it needed a color to be installed, probably because of the compatibility with WYVERN Exhaust.
Installation is easy, so even beginners will find Large sturdy.
View detail
Good on Race ish!
The Ikazuchi Exhaust System was installed in time for the replacement.
The change from the Tandem Footpeg will result in a weight reduction of the vehicle body.
The bracket itself is lightweight, but it is strong and will not bend unless it is subjected to a strong external force, such as a fall. I am very satisfied with the product itself, but I think the price is a little high.
View detail
It's not just about looks…
I don't tandem, so I removed the tandem footpegs on both sides and installed this one.
The product itself is also cool, but without Step, the Rear has become Refreshing.
Plus, the weight savings will be there!
View detail
Looks Refreshing
I bought this to remove the Tandem Footpeg to fit the Single Seat.
It is recommended to use a shorter nut (20mm or 25mm) on the body side and a rubber on the silencer side to prevent vibration.
Also, the installation requires a little hang at the three screw stops.
If you tighten it while taking Balance, you can install it.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Beautiful finish
The exhaust bracket I was using before was not strong enough, so I replaced it. This product is very strong and well made. The finish is very beautiful and I like it. The material is Stainless Steel and it is a little heavy. The finish is beautiful. The finish is beautiful. View detail
![[Repair / Optional Parts] Silencer Bracket](https://global.webike-cdn.net/photo/impression/c3/c3018a08a79c06661f0181edbc2f03efL.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
It can be used for OEMExhaust System without any problem.
[How is it used?
The OEM Tandem Footpeg is removed and installed.
Was the one you received as per Image?
It's a simple Aluminum Bracket and it looks exactly like the Image.
Was the installation difficult?
It's very easy.
Just remove a total of 3 Bolts from the body side and the Silencer side.
It takes less than 10 minutes to replace.
How was your experience with it?
The OEM Silencer is also AKRAPOVIC, so I think it's Exactly the right product.
If you remove the Tandem Footpeg of Both Sides and replace it with this product, it will look quite Race ish.
It is a little bit lighter.
The Tandem Footpeg will be gone, so you will not be able to ride with two people.
[Included Parts:were they on?
All the necessary parts for replacement are included and even the screw lock agent is included.
[Was there anything that disappointed you?
Not disappointing, but a little pricey for what it is.
View detail
![Exhaust Hanger[Exhaust Bracket] + Footrest Blank Plate Kit](https://global.webike-cdn.net/photo/impression/97/97bebd0433edd4f1ffadbaa1f5c53c85L.jpg)
Fits: KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R
Focus on appearance
When used in conjunction with the Single seat cowl, the Tandem Footpeg is eliminated, giving the Rear a tighter, more Race ish look.
However, depending on the Silencer, you may get a little Gap.
The hole is a little large for the bolt, so you can adjust it there.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
The atmosphere of Frame and Exhaust Bracket is Exactly.
I went with the frosted Black to match the Frame as shown in the photo, but the actual product is a careful Material:Polishing.
It is for removing Tandem Footpeg, but Aluminum Collar is included so that it can be shared with Tandem Footpeg Plate of K-FACTORY.
This product is made of aluminum pipe which is bent nicely to match the design of the frame, so it is a good product if you want to match the atmosphere of the frame and exhaust bracket.
It is not a point of caution, but unlike the NORMAL, the Bracket is facing the Exhaust System in a straight line, and it is more visible than the Heel plate. If you have large feet and ride on your toes, or if you are using the Rear Sets, you may want to stain your heels while riding.
Then there's the laborious Material:Polishing has been done, but the weld marks are quite noticeable, so it would be great if this bracket could be polished before shipping.
View detail
It's cool, but …
If you put a helmet on the helmet holder, it will hit the Chain Cover or Tire.
It is natural to say that I removed Tandem Footpeg.
It's a street riding Motorcycle so unfortunately I had to change it back.
The thing itself is good, though.
View detail