Reviews
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA250R
Wow that's cool
It's cool!
Recommendation!
By all means.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Suitable for Circuit driving
I use YOSHIMURA's R11, but since YOSHIMURA's Exhaust Bracket has been discontinued, I bought and used Over's one.
Since it says in the product details that the OEM Exhaust System is also compatible, I thought it could be used on the YOSHIMURAR11, which is fixed in the same position as the OEM, and the result was that it was successfully attached.
Since I use the Exhaust System for circuit driving, the collar connecting the Exhaust System to the Exhaust Bracket is a bit of an obstacle for hang-offs. Therefore, unlike the Instruction Manual, I put the collar on the inside of the exhaust bracket, although it is a bit unreasonable.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Quality item
Super fast shipping to the USA, safe packaging, high quality built product. Highly recommended and will but from again. View detail
Hanger
Purchased along with footpeg. It was great. View detail
Fits a CB500F Perfectly!
Very nicely made and anodising is uniform. Handsom on the bike and cleans up the rear foot peg superbly. Nice little bit of weight savings too! View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Very cool!
I bought this to go with my Earls Gear Exhaust System.
I'm very satisfied with Large because it looks very cool.
The texture is great!
However, the position of the exhaust band will be a little backward, so if you are considering installation, it is recommended to replace the exhaust band before it leaves a mark on the silencer.
One thing that needs to be improved is the need for a new bolt to hold the exhaust band in place.
The bolt that comes with the Exhaust System is too long to tighten the nut because the screw is not cut. Even if the nut is tightened, the bolt is too long and not cool...
The price is good, so I thought it would be a good idea to get a Bolt1 pc as a bonus.
View detail
AKRAPOVICSilencer bracketKAWASAKI ZX-10RR
The shape is good
The Carbon one is more expensive and has the same shape as the NORMAL part.
I chose this one for its Design nature.
View detail
Practical choice for texture!
After I modified the exhaust pipe, because of the angle of the modified exhaust pipe, the rear pedal bracket had to be changed and raised. But in this way, the ride comfort of the back seat becomes worse. The rear pedal bracket of this OVER RACING has the same screw holes as the original bracket, but the pedal position has to be expanded. Therefore, it is possible to slightly improve the ride comfort of the rear seat while keeping the high exhaust angle unchanged. Very good! But it should be noted that in order to install this set of brackets, the bracket adapter code equipped with my R'S gear exhaust pipe needs to be polished partly! -------------------------------------------------- -------- After I changed the exhaust pipe, because the reasons for the angle of the exhaust pipe, the post-pedal bracket had to change the angle to do raise treatment. But in this way, the ride comfort of the rear seat became poor. The back pedal bracket of this Over Racing is the same as the screws of the original bracket, but the foot is more expanded. Therefore, it can be slightly improving the ride comfort of the rear seat while maintaining the high angle of exhaust gas. However, it should be noted that in order to install this set of brackets, my R's GEAR exhaust pipe is equipped with the bracket transfer code needs to be partized! View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
K-FACTORY STD Position Corresponding Aluminum Exhaust Bracket
My model: Kawasaki z900rs cafe, material: aluminum alloy welding, first-class workmanship. Effect: It is much more beautiful than the original one, which makes the car more silver and more retro. Purchase and installation experience: The installation is very simple and non-destructive replacement, the delivery time is very fast, and the goods will arrive at about 7 soon. I am very satisfied! View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100
Good quality and satisfied
It was used for Silencer which is not made by Nojima.
Just fit with no problems, strong enough for what I need, good quality and satisfactory.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Complete Bolt On
Perfect compatibility with the OEM AXIS La Exhaust System! I was able to install it without any trouble. …But you need Torx wrench because the Bolt is Torque (star shape), so you need to be careful. View detail
Very good
I think the fitting and texture are good. I was able to install it without processing etc., but I don't know because I didn't install the OEM Exhaust System. View detail
Installed on AXIS Labo Exhaust System
I bought this Bracket for my Trickster to install on my AXIS Labo Exhaust System.
I wasn't sure if it would stick, but I pushed the exhaust system up a little and installed it...
The result... It's on.
We do not recommend diversion, so please do so at your own risk.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Fits to Normal muffler
Exactly fits the AXIS Lab Bitch in NORMAL. Other company's products are expensive or the design is not so good.
It fits without a problem because it is the same manufacturer.
View detail
Towards Single
In putting on the Single seat cowl, I also want to remove the Tandem Footpeg!
It's also an Exhaust Bracket though…
It was the closest to Image that I could find, so I bought it & installed it.
It is supposed to be a special product, but even Normal muffler had Gap in the hole position.
Tighten it while watching the Bolt3 Balance and you're done!
However, the Bolt on the Exhaust System side cannot be diverted because the OEM is a half screw.
I used the m8 20mm because I added the anti-vibration Rubber.
It looks great!
The vibration of the exhaust system seems to have decreased.
View detail
It looks better now.
I bought this to remove my Tandem Footpeg.
Material:I don't think there is any concern about strength etc. than Aluminum.
With the GSX-R125, I think 225mm would have been a better fit, but Clearance managed to get it to fit, and it looks good now that it is slightly raised.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
image
I couldn't post a picture in my last impression, so I'll post it here. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Installed on ZrX1200 DAEG
This is the impression after using it for about one year after purchasing and installing it.
I installed this Lady Bird's Aluminum Exhaust Bracket on my previous ZrX1100, and it was good parenthesis. I think the surface is Aluminum with Buffing, but even if I polish it well, it is oxidized to white. It is a single rider spec. to replace the normal tandem stepBracket on the exhaust system side, but the shape is good and the parenthesis is good. It is Recommendation.
View detail
z900rs&over racing
z900rs has changed the over racing family, the separation handle, and the rear seat pedals, workmanship and appearance are all high-quality, I hope the over family will produce some z900rs modified small parts, such as the frame hole cover, the front fork adjustment button, and so on! I have bought a lot of things at webike, and I know a lot of car friends who buy modified parts at webike. I hope that webike will continue to work hard and offer more discounts! come on! z900rs changed the over racing family, the separation handle, and the rear seat pedals, workmanship and appearance are all of high quality, I hope the over family will produce some z900rs modified small parts, such as the frame hole cover, the front fork adjustment button and so on! I have bought a lot of things at webike, and I know a lot of car friends who buy modified parts on webike. I hope that webike will continue to work hard and offer more discounts! Come on! translated by Google Translator View detail
I am satisfied with the accuracy and finish.
Since I only run Circuit with the S1000R, I don't need a Tandem Footpeg, so I bought this product for that reason. I am satisfied with the machining accuracy and the finish in Large.
It is not a problem of the product itself, but it was difficult to remove and install the rubber parts of the exhaust system installation part because I used the original ones.
View detail